Short-Length Code Designs for Integrated Sensing and Communications: A Deep Learning Approach
Authors: Muah Kim, Shuangyang Li, Tayyebeh Jahani-Nezhad, Rafael F. Schaefer, Giuseppe Caire
Organizations: Faculty of Electrical and Computer Engineering, Dresden University of Technology, Dresden 01069, Germany · Faculty of Electrical Engineering and Computer Science, Technical University of Berlin, Berlin 10587, Germany
Integrated sensing and communication (ISAC) enables joint communication and sensing using a shared waveform, but its signal design is challenging due to the inherent trade-off between the two objectives, particularly in the short blocklength regime. This paper proposes an autoencoder (AE)-based framework for ISAC waveform design in noncoherent settings. We derive a modified Cramér-Rao bound for multi-target delay estimation and analyze the maximum-likelihood decoding rule for noncoherent communication under correlated fading. These results reveal structural connections and trade-offs between communication and sensing objectives in waveform design. Based on this analysis, the AE learns waveform representations that jointly optimize both functionalities, with a tunable parameter controlling the trade-off. Simulation results show that the proposed design outperforms conventional schemes in both communication reliability and sensing accuracy, especially under short blocklength and fading conditions.
Figures & tables
Fig. 1: A diagram for the considered ISAC system based on the NN encoder.
Fig. 2: Communication- and sensing-optimal designs are analyzed through BER, MCRB, and constellation visualizations for K=6 , N=9 . The MSE result is additionally reported under a simplified single-target scenario ( P=1 ) to provide empirical validation.
Fig. 3: BER and MCRB of the CNN for N=9 are measured with varying γ .
Fig. 4: BERs and MCRBs of the CNN model for N=90 , measured for varying γ values for joint design.
Fig. 5: Pareto trade-off between BER and MCRB for different values of the joint loss parameter γ , evaluated with the CNN model for K=60,N=90 under a partially correlated channel with fD=0.1 . Each circular marker on the curve corresponds to a specific γ value, whereas a cross and a triangle marker show DBPSK and ZC, respectively.
With the growing demand for satellite sensing and communication, the limited wireless resources are difficult to support multiple satellite systems. Therefore, it is desired to investigate integrated sensing and communication (ISAC) in low Earth orbit (LEO) satellite systems to enable multi-functionality within a single satellite, thereby saving both spectrum and orbital resources. In this paper, a framework for ISAC in LEO satellite systems is established, where a satellite can simultaneously sense multiple targets and serve multiple communication users (CUs) over the same spectrum. Considering the limited onboard energy of satellite, a novel robust beamforming design algorithm is developed with the goal of minimizing total transmit power while satisfying the mean squared error (MSE) requirements for sensing and signal-to-interference-plus-noise ratio (SINR) requirements for communication in presence of channel phase uncertainty which exacerbates the cross-functional interference. According to theoretical analysis, the proposed algorithm for ISAC in LEO satellite systems is effective. Moreover, extensive simulations confirm the superiority of the proposed algorithm over baselines.
Hezhen Yang, Xiaoming Chen, Qi Wang
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou 310027, China
In this paper, we study an unmanned aerial vehicle (UAV)-assisted integrated sensing and communication (ISAC) system, where a UAV enhances the sensing capability of a base station (BS) towards a target while ensuring reliable communication towards a downlink user. This architecture is practically attractive for future wireless networks due to the UAV's controllable mobility and adaptive sensing coverage in wireless environments. The sensing performance is characterized by the average Cramér-Rao bound (CRB), which quantifies the minimum variance of the unbiased angle-of-arrival estimation. To enhance the sensing performance, the UAV trajectory and beamforming parameters are jointly optimized under power and mobility constraints, while satisfying communication requirements to the downlink user. To address the resulting non-convex problem, we employ null-space projection for beamforming design and adopt deep reinforcement learning for the trajectory optimization over a discrete-time scale. In each time slot, beamforming is optimized based on the channel state information to improve CRB performance while mitigating interference between the BS and the communication user. Simulation results demonstrate that the proposed method significantly reduces the time-averaged CRB by over 10%, compared with the ISAC system without UAV assistance, and also achieves a higher sensing accuracy than both the fixed-UAV-trajectory and the maximum-ratio-transmission-based beamforming benchmarks.
Yi Yang, Qianqian Zhang, Huaxia Wang
Department of Electrical and Computer Engineering, Rowan University, NJ, USA
Future integrated sensing and communication (ISAC) architectures separate the sensing entity (SE) that acquires measurements from the sensing function (SF) that performs inference, creating a need for compact, task-oriented feedback on the SE-SF interface. Forwarding the raw channel frequency response or full per-link delay-Doppler-azimuth-elevation (DDAE) tensor is prohibitively expensive, while peak-only reporting discards target-discriminative structure under clutter. We propose a learning-based coarse-to-fine sensing pipeline with candidate-latent feedback for single-target estimation. At the SE, a lightweight convolutional scorer produces a dense delay-Doppler proposal map from pilot-based OFDM channel estimates, and a learned encoder constructs K compact C-dimensional candidate tokens by fusing per-candidate azimuth-elevation patches, normalized position, and confidence cues. The latents are uniformly quantized post-training to b bits and transmitted under a finite budget B_fb = bKC + 18K + 16 bits to the SF, which performs cross-candidate refinement, reranking, and joint four-parameter estimation. On a ray-traced urban scene with static and dynamic clutter, three operating points in the (K, C, b) design space achieve 96.33-98.88% detection at 107-806 bytes per coherent processing interval, compression ratios of 1.2-9.2 x 10^4 over the 8-bit DDAE magnitude tensor, reducing the SE-SF interface from multi-Gbit/s to sub-Mbit/s rates. Cross-scene evaluation on an independent campus-scale environment achieves 98.79-99.50% detection and at-or-better angular accuracy without retraining, indicating that the learned representation captures target-relevant structure that transports across scenes of comparable or lower clutter density.