Reactive Humanoid Multi-Contact Using Learned Stability Models

Humanoid robots operating in unstructured environments must recover from unexpected disturbances-a capability that remains challenging for end-to-end control policies. We present RECOVERFORMER, a fully end-to-end humanoid recovery policy that learns when and how to switch among recovery behaviors-including compensatory stepping, hand-environment contact, and center-of-mass reshaping-while maintaining robust performance under model mismatch. The architecture combines a causal transformer over a 50-step observation history with two novel heads: a latent recovery mode that enables smooth transitions among distinct recovery strategies, and a contact affordance head that predicts which environmental surfaces (walls, railings, table edges) are beneficial for stabilization. We evaluate RECOVERFORMER on the Unitree G1 humanoid in MuJoCo. Trained only on open floor, RECOVERFORMER transfers zero shot to walled environments, achieving 100% recovery success across 100-300 N pushes and across wall distances from 0.25-1.4m. Under zero-shot dynamics mismatch, RECOVERFORMER reaches 75.5% at plus +25% mass, 89% under 30 ms latency, 91.5% at low friction, and 99% under compound friction, latency and mass perturbation. The learned latent modes specialize across force regimes without mode-level supervision, validated by t-SNE analysis of 300 episodes. Taken together, these results show that a single end-to-end policy can deliver multi-modal, contact aware humanoid recovery that generalizes across perturbation magnitude, contact geometry, and dynamics shift.

Current humanoid reinforcement-learning policies excel at free-space motions but struggle with contact-rich tasks, as pure kinematic tracking cannot resolve the physical ambiguities of interacting with objects and uneven terrain. To address this, we introduce SceneBot, a unified motion-tracking framework capable of handling freespace locomotion, terrain traversal, and whole-body manipulation. SceneBot conditions a single policy on both reference motions and per-link contact labels, explicitly defining expected environmental interactions. To overcome the lack of annotated interaction data, we propose a hindsight scene reconstruction approach that infers scene-interaction graphs from retargeted human motion. Trained on 7.5 hours of this reconstructed, contact-rich data, SceneBot successfully generalizes to unseen motions and environments. Our results demonstrate that SceneBot is the first general framework to seamlessly unify free-space and contact-rich behaviors executing complex, long-horizon tasks like carrying a box upstairs and establishing contact conditioning as a powerful interface for humanoid control. All code and data will be open-sourced. More demos and information are available at: https://ericcsr.github.io/scenebot/

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.