cs.ROOct 11, 2026

Anticipatory Textile MMG-Strain Sensing for Confirm-Then-Assist Soft Knee Exosuits

Authors: Zheng Ma, Xiao Jin, Zhenhua Yu

Organizations: Department of Computing Science, University of Aberdeen, Aberdeen AB24 3UE, U.K. · Dyson School of Design Engineering, Imperial College London, London, U.K.

Abstract

Soft wearable robots must commit to assistance around movement onset, when the available signals are ambiguous. Surface electromyography (sEMG) detects neuromuscular drive early but degrades under sweat and electrode shift, and kinematic sensors respond only once the limb moves. This letter presents a knitted textile interface that co-samples a three-channel mechanomyography (MMG) array and an anterior strain sensor on a single synchronous 500 Hz clock. Across five participants, MMG activation preceded strain-detected knee motion during sit-to-stand by per-channel medians of 322-344 ms. Sampled on the same clock, the sign of the strain slope resolved movement direction on 649 of 650 completed transitions with no training or per-participant calibration, raising four-class balanced accuracy from 90.3% to 95.6%. The fused signals drove a two-stage confirm-then-assist policy for a soft pneumatic knee. Across 240 trials in four participants, the onboard controller entered the assist state on 78 of 80 sit-to-stand trials and on none of the 80 isometric co-contractions. It also entered the assist state on 27 of 80 stand-to-sit trials and left it at the hold timeout, motivating an antagonistic flexor gauge to resolve this direction at onset. Co-sampling muscle acoustics with textile strain on one clock lets the inflation command be issued around movement onset.

Figures & tables

Explore similar work

Aug 18, 2026

A Task-Agnostic Control Strategy for Dynamic Assistance with Pneumatically Actuated Soft Exosuits

Pneumatic artificial muscles have provided new opportunities to develop upper-extremity soft exosuits for reha- bilitation, augmentation, and assisted daily living. However, the complex dynamics and limited bandwidth of these actuators has made providing responsive assistance based on user intention a longstanding challenge. In this work, we present an inverse-plant control strategy for pneumatically actuated soft exosuits that only relies on kinematic sensing for task-agnostic and dynamic assistance during daily living. We model the human-robot system using a Hammerstein dynamic model, consisting of a Preisach hysteresis model and a linear time-invariant filter, to capture the static and dynamic behavior of the system. We personalize our model to each user using 140 s of data and approximate an inverse to integrate into our control loop. When evaluated on a test rig that emulated a soft assistive exosuit for the wrist, our controller reduced the interaction torque by up to 73% and the activation of key flexor and extensor muscles by up to 47% relative to the condition with no assistance for speeds ranging from 8°/s to 120°/s. Overall, this work presents a control strategy that can provide task-agnostic, dynamic assistance with pneumatically actuated soft exosuits without the need for physiological or force sensors to interpret user intention.
Oct 13, 2025

Koopman Model Predictive Control of An Origami-Inspired Soft Exoskeleton for Knee Rehabilitation

Knee rehabilitation plays a critical role in restoring patients' mobility and functional independence. Traditional rigid rehabilitation exoskeletons are often bulky and cumbersome to wear, whereas soft pneumatic exoskeletons offer lightweight, wearable, and intrinsically compliant solutions that are better suited for human--robot interaction. However, achieving precise motion control for soft exoskeletons remains challenging due to the difficulty of accurately modeling pneumatic actuators and the patient-specific human--robot coupled dynamics during rehabilitation training. To address these challenges, this paper proposes a Koopman-based Model Predictive Control (KMPC) framework for soft knee rehabilitation exoskeletons. The nonlinear human--robot coupled system is represented through a lifted linear Koopman model, enabling predictive control with explicit handling of constraints. In addition to actuation commands used to control valves and pumps, electromyography (EMG) signals are incorporated as system inputs, allowing the Koopman model to capture voluntary neuromuscular contribution and individual neuromuscular characteristics. Experimental results on both healthy participants and patients demonstrate that the proposed framework improves model prediction accuracy and effectively captures subject-specific behaviors, thereby supporting EMG-informed subject-specific assistance within the tested seated knee-rehabilitation setting. Compared with conventional Proportional--Integral--Derivative (PID) control, the proposed KMPC approach achieves lower tracking errors and reduced actuation effort in both passive and active rehabilitation modes. Additional comparisons with Iterative Learning Control (ILC) further validate the tracking performance of the proposed controller.
Jun 3, 2026

SoftPINCH: EMG-Driven Soft Exoskeleton Assistance for Finger Flexion and Grasping

Surface electromyography (sEMG) provides a non-invasive interface for detecting hand-movement intention and controlling wearable assistive devices. However, reliable EMG-driven hand assistance remains challenging because EMG signals are affected by noise, motion artifacts, electrode placement, muscle fatigue, and inter-subject variability. At the same time, many hand exoskeletons remain mechanically restrictive or bulky, limiting comfort and natural hand motion. This work presents SoftPINCH, an EMG-driven soft wearable exoskeleton for thumb-index finger flexion and pinch grasp assistance. The system combines a tendon-driven soft exoskeleton, fingertip magnetic contact sensing, and neural EMG decoding for intention-based assistance. Surface EMG was recorded from forearm muscles during index and thumb movements, and three subject-independent decoding architectures were evaluated: LSTM, CNN+LSTM, and CNN+LSTM with attention. The CNN+LSTM and CNN+LSTM-attention models both achieved 99.4% LOSO test accuracy, outperforming the standalone LSTM, which reached 97.8%. However, the attention mechanism did not provide a significant improvement over CNN+LSTM, indicating that CNN-based feature extraction was sufficient for robust EMG representation. The CNN+LSTM model was therefore selected for real-time deployment due to its high accuracy and lower architectural complexity. Functional evaluation showed that active exoskeleton assistance reduced muscular effort during isolated finger flexion and object grasping. During weighted grasping, assistance reduced muscular effort across all tested loads, with a 92.6% reduction at the highest load. These results demonstrate the potential of SoftPINCH for intuitive, low-effort pinch assistance using real-time EMG-driven soft robotic control.