Organizations: SDU Soft Robotics, The Maersk Mc-Kinney Moller Institute, University of Southern Denmark, Odense, Denmark
Abstract
Surface electromyography (sEMG) provides a non-invasive interface for detecting hand-movement intention and controlling wearable assistive devices. However, reliable EMG-driven hand assistance remains challenging because EMG signals are affected by noise, motion artifacts, electrode placement, muscle fatigue, and inter-subject variability. At the same time, many hand exoskeletons remain mechanically restrictive or bulky, limiting comfort and natural hand motion. This work presents SoftPINCH, an EMG-driven soft wearable exoskeleton for thumb-index finger flexion and pinch grasp assistance. The system combines a tendon-driven soft exoskeleton, fingertip magnetic contact sensing, and neural EMG decoding for intention-based assistance. Surface EMG was recorded from forearm muscles during index and thumb movements, and three subject-independent decoding architectures were evaluated: LSTM, CNN+LSTM, and CNN+LSTM with attention. The CNN+LSTM and CNN+LSTM-attention models both achieved 99.4% LOSO test accuracy, outperforming the standalone LSTM, which reached 97.8%. However, the attention mechanism did not provide a significant improvement over CNN+LSTM, indicating that CNN-based feature extraction was sufficient for robust EMG representation. The CNN+LSTM model was therefore selected for real-time deployment due to its high accuracy and lower architectural complexity. Functional evaluation showed that active exoskeleton assistance reduced muscular effort during isolated finger flexion and object grasping. During weighted grasping, assistance reduced muscular effort across all tested loads, with a 92.6% reduction at the highest load. These results demonstrate the potential of SoftPINCH for intuitive, low-effort pinch assistance using real-time EMG-driven soft robotic control.
Soft wearable robotic systems have emerged as a promising solution for assisting individuals with reduced hand function. This paper presents SoFiE, a modular soft finger exoskeleton designed to assist index-finger flexion during grasping tasks. The proposed system is primarily fabricated using 3D-printed flexible materials, enabling a lightweight, low-profile, and modular design. Actuation is achieved through a tendon-driven mechanism powered by a compact DC motor, while passive extension is provided by a compliant conductive spring. This element, termed StretchSense, also functions as a proprioceptive sensor by exhibiting resistance changes under deformation. Furthermore, a novel tactile sensing approach, MagSense, is introduced, using a magnet and magnetometer pair embedded in a soft fingertip structure to estimate contact force and object compliance. The system is fully untethered and controlled by an embedded microcontroller. In addition, actuator-level sensing through motor encoder feedback enables estimation of the system state, providing a foundation for safe and adaptive control strategies. Experimental validation demonstrates the capability of the system to provide reliable pose estimation, distinguish between materials with different stiffness, and generate distinct sensor signatures across different grasping tasks. This paper details the design, fabrication, and sensing concepts of the proposed exoskeleton as a proof of concept toward modular, soft, and assistive wearable robotics.
Magnus Malthe Sigsgaard Nielsen, Nicklas Nikolaj Grønvall, Xiaofeng Xiong +1
Continuous estimation of high-dimensional finger kinematics from forearm surface electromyography (EMG) could enable natural control for hand prostheses, AR/XR interfaces, and teleoperation. However, the complexity of human hand gestures and the entanglement of forearm muscles make accurate recognition intrinsically challenging. Existing approaches typically reduce task complexity by relying on classification-based machine learning, limiting the controllable degrees of freedom and compromising on natural interaction. We present an end-to-end framework for continuous EMG-to-kinematics regression using only consumer-grade hardware. The framework combines an 8-channel EMG armband, a single webcam, and an automatic synchronization procedure, enabling the collection of the EMG Finger-Kinematics dataset (EMG-FK), a 10-h dataset of synchronized EMG and 15 finger joint angles from 20 participants performing rich, unconstrained right-hand motions. We also introduce the Temporal Riemannian Regressor (TRR), a lightweight GRU-based model that uses sequences of multi-band Riemannian covariance features to decode finger motion. Across EMG-FK and the public emg2pose benchmark, TRR outperforms state-of-the-art methods in both intra- and cross-subject evaluation. On EMG-FK, it reaches an average absolute error of 9.79°±1.48 in intra-subject and 16.71°±3.97 in cross-subject. Finally, we demonstrate real-time deployment on a Raspberry Pi 5 and intuitive control of a robotic hand; TRR runs at nearly 10 predictions/s and is roughly an order of magnitude faster than state-of-the-art approaches. Together, these contributions lower the barrier to reproducible, real-time EMG-based decoding of high-dimensional finger motion, and pave the way toward more natural and intuitive control of embedded EMG-based systems.
Loss of hand function due to conditions like stroke or multiple sclerosis significantly impacts daily activities. Robotic rehabilitation provides tools to restore hand function, while novel methods based on surface electromyography (sEMG) enable the adaptation of the device's force output according to the user's condition, thereby improving rehabilitation outcomes. This study aims to achieve accurate force estimations during medium wrap grasps using a single sEMG sensor pair, thereby addressing the challenge of escalating sensor requirements for precise predictions. We conducted sEMG measurements on 13 subjects at two forearm positions, validating results with a hand dynamometer. We established flexible signal-processing steps, yielding high peak cross-correlations between the processed sEMG signal (representing meaningful muscle activity) and grip force. Influential parameters were subsequently identified through sensitivity analysis. Leveraging a novel data-driven Koopman operator theory-based approach and problem-specific data lifting techniques, we devised a methodology for the estimation and short-term prediction of grip force from processed sEMG signals. A weighted mean absolute percentage error (wMAPE) of approx. 5.5% was achieved for the estimated grip force, whereas predictions with a 0.5-second prediction horizon resulted in a wMAPE of approx. 17.9%. The methodology proved robust regarding precise electrode positioning, as the effect of sensing position on error metrics was non-significant. The algorithm executes exceptionally fast, processing, estimating, and predicting a 0.5-second sEMG signal batch in just approx. 30 ms, facilitating real-time implementation.
Tomislav Bazina, Ervin Kamenar, Maria Fonoberova +1