DEX-PHD: A Dexterous Portable Handheld Device for Multimodal Data Collection

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

Data-driven dexterous hand manipulation requires large-scale, physically consistent demonstration data. Simulation and video-based methods suffer from sim-to-real gaps and retargeting problems, while MoCap glove-based teleoperation systems require per-operator calibration and lack portability, as the robot hand is typically fixed to a stationary arm. Portable alternatives improve mobility but lack cross-platform and cross-operator compatibility. We present DEX-Mouse, a portable, calibration-free hand-held teleoperation interface with integrated kinesthetic force feedback, built from commercial off-the-shelf components under USD 150. The operator-agnostic design requires no calibration or structural modification, enabling immediate deployment across diverse environments and platforms. The interface supports a configuration in which the target robot hand is mounted directly on the forearm of an operator, producing robot-aligned data. In a comparative user study across various dexterous manipulation tasks, operators using the proposed system achieved an 86.67% task completion rate under the attached configuration. Also, we found that the attached configuration reduced the perceived workload of the operators compared to spatially separated teleoperation setups across all compared interfaces. The complete hardware and software stack, including bill of materials, CAD models, and firmware, is open-sourced at https://dex-mouse.github.io/ to facilitate replication and adoption.

Despite increasing dataset scale and model capacity, robot manipulation policies still struggle to generalize beyond their training distributions. As a result, deploying state-of-the-art policies in new environments, tasks, or robot embodiments often requires collecting additional demonstrations. Enabling this in real-world deployment settings requires tools that allow users to collect demonstrations quickly, affordably, and with minimal setup. We present TeleDex, an open-source system for intuitive teleoperation of dexterous hands and robotic manipulators using any readily available phone. The system streams low-latency 6-DoF wrist poses and articulated 21-DoF hand state estimates from the phone, which are retargeted to robot arms and multi-fingered hands without requiring external tracking infrastructure. TeleDex supports both a handheld phone-only mode and an optional 3D-printable hand-mounted interface for finger-level teleoperation. By lowering the hardware and setup barriers to dexterous teleoperation, TeleDex enables users to quickly collect demonstrations during deployment to support policy fine-tuning. We evaluate the system across simulation and real-world manipulation tasks, demonstrating its effectiveness as a unified scalable interface for robot teleoperation. All software and hardware designs, along with demonstration videos, are open-source and available at orayyan.com/teledex.