cs.RONov 2, 2026

A Tightly Coupled Magnetic-Inertial SLAM System for Field Robots

Authors: Chuan Huang, Tongxing Peng

Abstract

Field robots operating in mines, tunnels, and disaster areas require reliable localization despite GNSS denial and degraded camera and LiDAR measurements caused by dust, smoke, or poor illumination. Missions involving both ground and aerial robots further motivate complementary sensing modalities that do not depend on visibility, preinstalled infrastructure, or wheel contact. This letter presents MISLAM, a tightly coupled magnetic-inertial simultaneous localization and mapping system using an IMU and a nine-magnetometer array, without relying on external odometry or platform-specific motion assumptions. The system combines the inertial navigation model with local polynomial magnetic-field models for short-term motion estimation and a global Gaussian process model for drift correction using an error-state Kalman filter. Offline evaluation on three indoor datasets collected with a handheld rig shows reductions in total endpoint closure error of 45.7% - 78.0% relative to magnetic-inertial odometry. Under poor illumination, MISLAM maintains tracking after visual-inertial odometry fails, achieving a horizontal closure error of 0.332 m, although vertical drift remains a limitation. These results support magnetic-inertial SLAM as a complementary localization modality for robotic sensor suites operating under degraded visual conditions.

Figures & tables

Explore similar work

Apr 21, 2026

SL(C)AMma: Simultaneous Localisation, (Calibration) and Mapping With a Magnetometer Array

Indoor localisation techniques suffer from attenuated Global Navigation Satellite System (GNSS) signals and from the accumulation of unbounded drift by integration of proprioceptive sensors. Magnetic field-based Simultaneous Localisation and Mapping (SLAM) reduces drift through loop closures by revisiting previously seen locations, but extended exploration of unseen areas remains challenging. Recently, magnetometer arrays have demonstrated significant benefits over single magnetometers, as they can directly estimate the odometry. However, inconsistencies between magnetometer measurements negatively affect odometry estimates and complicate loop closure detection. We propose two filtering algorithms: The first focuses on magnetic field-based SLAM using a magnetometer array (SLAMma). The second extends this to jointly estimate the magnetometer calibration parameters (SLCAMma). We demonstrate, using Monte Carlo simulations, that the calibration parameters can be accurately estimated when there is sufficient orientation excitation, and that magnetometers achieve inter-sensor measurement consistency regardless of the type of motion. Experimental validation on ten datasets confirms these results, and we demonstrate that in cases where single magnetometer SLAM fails, SLAMma and SLCAMma provide good trajectory estimates with, more than 80% drift reduction compared to integration of proprioceptive sensors.
Jun 24, 2026

MIL-LC: A Robust Magnetometer-Inertial-LiDAR Fusion Multimodal Localization Framework

Localization in challenging environments, such as GNSS-denied, geometrically repetitive, or textureless scenes commonly found in offices, hotels, and underground parking facilities, remains an open problem for reliable autonomous mobile robot (AMR) deployment. Single-modality localization methods are inherently limited by the constraints of individual sensors. Although multimodal fusion frameworks have shown improved robustness, most existing approaches still rely heavily on geometric or texture features, or on infrastructure-based beacons, which increase installation and maintenance costs while reducing deployment flexibility. Recently, ambient magnetic field (AMF)-based localization has attracted growing attention because it does not depend on geometric or texture features, nor does it require additional infrastructure, making it a promising complementary modality for AMR localization. However, existing studies have only explored such fusion in pedestrian scenarios using smartphone-mounted sensor suites, and practical solutions for AMR systems remain largely unexplored. To address this gap, this article proposes a magnetometer-inertial-LiDAR fused multimodal localization framework with a custom-designed sensor suite, termed MIL-LC, which provides reliable localization even when LiDAR suffers from geometric degeneration or when the magnetic map changes during long-term deployment. Extensive experiments in both simulation and real-world environments demonstrate that the proposed MIL-LC framework achieves robust and accurate localization performance.
Jul 24, 2026

Mag4D-SLAM Dataset: A Repeated-Traversal Multi-Modal 4D Geomagnetic Dataset for Localization and Mapping

Geomagnetic sensing offers an infrastructure-free, absolute orientation reference that is robust to GNSS denial and visual degradation, yet no large-scale outdoor robotics dataset supports its systematic study in SLAM. Existing magnetic datasets are confined to small-scale indoor environments and lack the synchronized multi-modal sensing, repeated-traversal structure, and high-precision 6-DoF ground truth required for geomagnetic SLAM research. We present Mag4D-SLAM, the first large-scale outdoor geomagnetic SLAM dataset. It comprises 14 sequences totaling over 18 km of synchronized LiDAR, camera, IMU, tri-axis magnetometer, and GNSS measurements with SE(3) ground-truth poses, collected along structured campus trajectories under paired day/night conditions in both forward and reverse directions. Through repeated-traversal experiments, we analyze three core properties: magnetic field repeatability across different recording sessions (daytime and nighttime), drift-free global heading estimation, and location-discriminative magnetic signatures for cross-session place recognition. Mag4D-SLAM is designed to support research on yaw drift mitigation, magnetic loop closure, and long-term localization and to open new research questions on how geomagnetic sensing can complement visual and LiDAR modalities or provide a fallback cue under illumination changes, structural repetition, and GNSS-denied long-term operation.