Mag4D-SLAM Dataset: A Repeated-Traversal Multi-Modal 4D Geomagnetic Dataset for Localization and Mapping

Indoor localisation techniques suffer from attenuated Global Navigation Satellite System (GNSS) signals and from the accumulation of unbounded drift by integration of proprioceptive sensors. Magnetic field-based Simultaneous Localisation and Mapping (SLAM) reduces drift through loop closures by revisiting previously seen locations, but extended exploration of unseen areas remains challenging. Recently, magnetometer arrays have demonstrated significant benefits over single magnetometers, as they can directly estimate the odometry. However, inconsistencies between magnetometer measurements negatively affect odometry estimates and complicate loop closure detection. We propose two filtering algorithms: The first focuses on magnetic field-based SLAM using a magnetometer array (SLAMma). The second extends this to jointly estimate the magnetometer calibration parameters (SLCAMma). We demonstrate, using Monte Carlo simulations, that the calibration parameters can be accurately estimated when there is sufficient orientation excitation, and that magnetometers achieve inter-sensor measurement consistency regardless of the type of motion. Experimental validation on ten datasets confirms these results, and we demonstrate that in cases where single magnetometer SLAM fails, SLAMma and SLCAMma provide good trajectory estimates with, more than 80% drift reduction compared to integration of proprioceptive sensors.

Localization in challenging environments, such as GNSS-denied, geometrically repetitive, or textureless scenes commonly found in offices, hotels, and underground parking facilities, remains an open problem for reliable autonomous mobile robot (AMR) deployment. Single-modality localization methods are inherently limited by the constraints of individual sensors. Although multimodal fusion frameworks have shown improved robustness, most existing approaches still rely heavily on geometric or texture features, or on infrastructure-based beacons, which increase installation and maintenance costs while reducing deployment flexibility. Recently, ambient magnetic field (AMF)-based localization has attracted growing attention because it does not depend on geometric or texture features, nor does it require additional infrastructure, making it a promising complementary modality for AMR localization. However, existing studies have only explored such fusion in pedestrian scenarios using smartphone-mounted sensor suites, and practical solutions for AMR systems remain largely unexplored. To address this gap, this article proposes a magnetometer-inertial-LiDAR fused multimodal localization framework with a custom-designed sensor suite, termed MIL-LC, which provides reliable localization even when LiDAR suffers from geometric degeneration or when the magnetic map changes during long-term deployment. Extensive experiments in both simulation and real-world environments demonstrate that the proposed MIL-LC framework achieves robust and accurate localization performance.

Maintaining consistency over long spatial and temporal horizons remains a fundamental challenge in large-scale LiDAR SLAM, particularly when integrating maps collected across multiple sessions. We present Chain-SLAM, a LiDAR SLAM backend enabling online multi-session map alignment and reuse with global consistency at large scale. We implement a chained loop closure mechanism that efficiently propagates geometric constraints across inter-session keyframes through an adjacency graph, enabling robust long-horizon consistency triggered by reliable short-horizon loop closures. The system initializes inter-session alignment with GNSS-proximity place recognition, then performs on-the-fly loop closure detections and joint optimization of loaded maps and newly acquired trajectories within a unified factor graph, maintaining both inter- and intra-session geometric consistency without dynamic object removal, and cross-platform robustness with minimal hyperparameter tuning. Experimental results show improved trajectory accuracy and robust multi-session integration on large-scale datasets. We release our source code to support reproducible research in large-scale multi-session LiDAR SLAM. Project site: https://ai4ce.github.io/Chain-SLAM/