A Tutorial on Shape Servoing of Deformable Objects-Part II: Advanced Concepts
Organizations: Instituto de Investigación en Ingeniería de Aragón (I3A), University of Zaragoza, Spain · DEI, University of Bologna, Italy · Institut Pascal, Clermont Auvergne INP, France
Abstract
In robotics, shape control, or shape servoing, refers to the automatic manipulation of a deformable object toward a desired shape. This article is the second of a two-part tutorial on data-driven, Jacobian-based shape control, in which the deformation Jacobian, a local model of how robot motion changes the measured shape, is estimated from measurements. Part I built the shape-servoing loop and derived a local stability condition. This paper starts by using the singular value decomposition of the deformation Jacobian to identify shape changes that can be produced by small robot motions, those that require large robot motions, and those that are locally unavailable. It then analyses how the choice of shape features determines how the controller regulates the object's shape and, therefore, how much the object deforms on its way to the target. It then describes three ways in which the shape control loop can fail: loss of controllability, loss of observability, and occurrence of mechanical instabilities. It closes with shape-control extensions to time-varying targets, secondary tasks, and three-dimensional objects.
Figures & tables
| Section | Main content |
|---|---|
| Section II | Singular value analysis of the deformation Jacobian : robot-motion and feature directions, manipulability, and conditioning. |
| Section III | Choice of the shape features : point coordinates, edge vectors, and curvature-based features; what they measure and regulate, and how strongly they deform the object. |
| Section IV | Failure modes of the shape-servoing loop : loss of controllability, loss of observability, and mechanical instability; detection and mitigation. |
| Section V | Extensions of the shape-servoing loop : time-varying target shapes, secondary tasks in the null space of the Jacobian estimate, and 3-D objects. |
| Feature map | Transl. | Rot. | Type | Free | |
|---|---|---|---|---|---|
| Point coords. | — | — | extrinsic | nothing | |
| Edge vectors | inv. | — | mixed | translation | |
| Curvature | inv. | inv. | intrinsic | rigid motion |
| Failure | Underlying cause | Observable signature | Mitigation |
|---|---|---|---|
| Controllability (taut, slack) | loses rank | weak singular directions; , | damped inverse [ 12 ] ; monitor and |
| Observability (invariance, occlusion) | motion in | weak singular directions; , | change feature map or viewpoint |
| Mechanical instability (buckling, snap-through) | quasistatic equilibrium loses regularity | small with large or poorly predicted | fully re-estimate after poor predictions |
Deformable Object Manipulation
Deformable Object Manipulation studies how robots perceive, model, and control flexible objects such as cloth, ropes, cables, and soft tissue.
See all 112 papers