Silinx: An Open, Browser-Based HDL Design Platform for Teaching Digital Systems on FPGA Boards
Organizations: Departamento de Engenharia Electrotécnica e de Computadores (DEEC), Faculdade de Ciências e Tecnologia (FCT), Universidade NOVA de Lisboa, Portugal
Abstract
Many digital systems courses teach on FPGA boards whose vendor tool is no longer maintained: the Digilent Basys2 and Nexys2 (Xilinx Spartan-3E) and Nexys3 and Atlys (Spartan-6) need Xilinx ISE 14.7, discontinued since 2013 and hard to install on the computers and tablets students use today. The author presents Silinx, a free (AGPL-3.0) HDL design platform for teaching that keeps ISE's Project Navigator workflow but runs in a web browser with nothing to install. A module can be written in VHDL or Verilog, in C or C++ through Silinx HLS, which is compatible with AMD's Vitis HLS and passes all 73 of its introductory examples, or drawn as a schematic, an ASM chart, a state diagram, a Boolean function with its Karnaugh map, or a Petri net, from which its HDL is generated. Designs are checked with explanations written for beginners, simulated, run on an emulated board, built, and programmed onto a real board over WebUSB. The implementation flow is open and runs in the browser: Yosys and nextpnr compiled to WebAssembly, with Silinx's own device data, timing model and bitstream writer for the Spartan-3E and Spartan-6, built by black-box observation of ISE's documented tools; Lattice iCE40 boards use the existing open iCE40 tools, and further families are planned. ISE is the oracle: Silinx's bitstreams are byte-identical to those ISE writes for the same placed and routed design, and pass ISE's design rule check. Against ISE at the same optimization goal, the open flow uses 15% fewer slices with 14% shorter critical paths when optimizing for area, and 21% fewer slices with 8% shorter critical paths when optimizing for speed (geometric means over 45 open-source designs built by both flows). The author also describes how the platform was developed with AI coding agents under test-first project rules.
Figures & tables
| Area | Speed | Fast | |
| ISE (XST) setting | Area, 2 | Speed, 2 | Speed, 1 |
| Logic LUTs | |||
| Flip-flops | |||
| Slices | |||
| As few LUTs or fewer | 30/45 | 33/45 | 26/45 |
| Critical path |
| Area | Speed | Fast | ||||
|---|---|---|---|---|---|---|
| Design | L | CP | L | CP | L | CP |
| vtr-mkPktMerge | 0.06 | 0.64 | 0.06 | 0.80 | 0.06 | 0.85 |
| light8080 | 0.37 | 0.78 | 0.36 | 0.83 | 0.37 | 0.78 |
| epfl-adder | 0.57 | 0.13 | 0.39 | 0.86 | 0.25 | 1.23 |
| epfl-priority | 0.46 | 1.82 | 0.51 | 0.41 | 0.42 | 2.07 |
| epfl-voter | 0.65 | 0.81 | 0.56 | 0.84 | 0.56 | 0.96 |
Electronic Design Automation
Electronic Design Automation uses algorithms and software to design, verify, optimize, and manufacture electronic circuits and systems.
See all 248 papers