cs.LGNov 9, 2026

Audited Gradients, Anchored Policies: Model-Based Reinforcement Learning for Efficient Flow Control

Authors: Ruige Kong, Stefania Fresca

Organizations: Department of Mechanical Engineering, University of Washington, Seattle, WA 98195, United States · NSF AI Institute in Dynamic Systems, University of Washington, Seattle, WA 98195, United States

Abstract

Feedback controllers for flows are expensive to design, since each candidate must be evaluated with a high-fidelity solver. Differentiable surrogates reduce that cost, but they also introduce a failure mode that prediction error cannot detect. Policy optimization uses the derivative of the objective with respect to the action, which we call the action gradient and which can be computed either through the surrogate or through the high-fidelity solver. Optimization through the surrogate uses only its action gradient, and a surrogate can follow the flow trajectory closely while misestimating this derivative. The surrogate action gradient is compared against a central finite-difference estimate from the high-fidelity solver on held-out states, under acceptance criteria fixed before the comparison, and we call that comparison an audit. A low-dimensional feedback law is then fitted to the surrogate action gradient when the surrogate passes the audit, and to the solver estimate when it does not. This law initializes a neural policy, and a quadratic penalty holds the policy near it during optimization. The proposed approach is validated on four test cases. The resulting controllers outperform or match a model-free baseline, while using 3 to 156 times fewer high-fidelity solver interactions across the four test cases. One surrogate predicts the objective at correlation 0.9996 but its action gradient at only 0.459, so prediction accuracy does not identify a usable surrogate. Another surrogate, whose action gradient agrees with the solver estimate at correlation 0.996, makes the objective 0.52% worse when the policy is optimized through it without the anchor penalty, so an accurate gradient alone does not provide a working controller. Finally, a surrogate that passes the audit at one fixed action fails it around the actions the deployed controller applies, so a pass is local.

Figures & tables

Appendix figures & tables20 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Oct 20, 2026

ArcFlow: Training Flow Policies for Multiple Solver Budgets

Flow-matching policies adjust inference cost through the number of solver steps, but reinforcement learning at a single fixed solver budget can hide degradation at cheaper deployment budgets and even erase useful one-step behavior present in a pretrained policy. We introduce Action-Ratio-Clip Flow (ArcFlow), a deployment-aware algorithm for training one flow policy across a specified range of solver budgets. ArcFlow combines action-aligned supervision, budget exposure, and worst-budget checkpoint selection. For reconstruction objectives, its bridge aggregates temporal probes into one surrogate ratio and one PPO-style clip per action, with a boundary residual exactly equal to deployed one-step reconstruction error. Cycling exposes the shared field to the deployment range, and selection optimizes its performance floor. For native velocity objectives, multi-budget endpoint supervision applies the same principle without replacing the native update. Both realizations preserve the architecture and deployment-time cost. Across DM Control, manipulation, and locomotion, ArcFlow attains the highest mean one-step return among five flow-policy baselines on 25 of 30 tasks under each method's reported training settings. Component studies identify complementary improvements from boundary supervision, the fixed-grid bridge, budget exposure, and deployment selection. These results establish deployment-budget-aware training as an effective route to strong low-step control with one policy serving multiple inference costs.
Apr 5, 2026

Enhancing sample efficiency in reinforcement-learning-based flow control: replacing the critic with an adaptive reduced-order model

Model-free deep reinforcement learning (DRL) methods suffer from poor sample efficiency. To overcome this limitation, this work introduces an adaptive reduced-order-model (ROM)-based reinforcement learning framework for active flow control. In contrast to conventional actor--critic architectures, the proposed approach leverages a ROM to estimate the gradient information required for controller optimization. The design of the ROM structure incorporates physical insights. The ROM integrates a linear dynamical system and a neural ordinary differential equation (NODE) for estimating the nonlinearity in the flow. The parameters of the linear component are identified via operator inference, while the NODE is trained in a data-driven manner using gradient-based optimization. During controller--environment interactions, the ROM is continuously updated with newly collected data, enabling adaptive refinement of the model. The controller is then optimized through differentiable simulation of the ROM. The proposed ROM-based DRL framework is validated on two canonical flow control problems: Blasius boundary layer flow and flow past a square cylinder. For the Blasius boundary layer, the proposed method effectively reduces to a single-episode system identification and controller optimization process, yet it yields controllers that outperform traditional linear designs and achieve performance comparable to DRL approaches with minimal data. For the flow past a square cylinder, the proposed method achieves superior drag reduction with significantly fewer exploration data compared with DRL approaches. The work addresses a key component of model-free DRL control algorithms and lays the foundation for designing more sample-efficient DRL-based active flow controllers.
May 7, 2026

SNAPO: Smooth Neural Adjoint Policy Optimization for Optimal Control via Differentiable Simulation

Many real-world problems require sequential decisions under uncertainty: when to inject or withdraw gas from storage, how to rebalance a pension portfolio each month, what temperature profile to run through a pharmaceutical reactor chain. Dynamic programming solves small instances exactly but scales exponentially in state dimensions. Black-box reinforcement learning handles high-dimensional states but trains slowly and produces no sensitivities. We introduce SNAPO (Smooth Neural Adjoint Policy Optimization), a framework that embeds a neural policy inside a known, differentiable simulator, replaces hard constraints with smooth approximations, and computes exact gradients of the objective with respect to all policy parameters and all inputs in a single adjoint pass. We demonstrate SNAPO on three domains: natural gas storage (training in under a minute, 365 forward curve sensitivities at no additional cost per sensitivity), pension fund asset-liability management (6.5x-200x sensitivity speedup over bump-and-revalue, scaling with the number of risk factors), and pharmaceutical manufacturing (cross-unit sensitivities through a 4-unit process chain, with 20 ICH Q8 regulatory sensitivities from 5 adjoint passes in 74.5 milliseconds). All sensitivities are produced by the same backward pass that trains the policy, at a cost proportional to one reverse pass regardless of how many sensitivities are computed.