cs.RONov 9, 2026

Force-Closure Condition for Cooperative Multi-robot Pushing of Rectangular Objects

Authors: Duy Anh Nguyen, Trung Dung Ngo

Organizations: More-Than-One Robotics Laboratory, Faculty of Sustainable Design Engineering, University of Prince Edward Island, Charlottetown, Canada.

Abstract

In cooperative object manipulation, the placement of pushing contacts determines whether force closure can be achieved and agents can generate arbitrary forces and torques on the object correspondingly. This study derives a necessary and sufficient closed-form condition for the planar force closure of a rectangular object, a common object shape in everyday settings, under four frictionless pushing contacts. For a rectangle of length bb and width aa, force closure holds if and only if (l1+l3−b)(l2+l4−a)<0(l_1+l_3-b)(l_2+l_4-a)<0, where l1,l2,l3,l4l_1,l_2,l_3,l_4 are the four edge contact locations. This condition is independent of the object's center of mass and is used to verify contact configurations before contact force allocation. When the condition is not satisfied, the signs of the two factors indicate which opposing contact pair should be adjusted. The condition and adjustment rule are then integrated into a full-pose trajectory-tracking framework as a geometric feasibility layer to demonstrate their use in control. Static wrench feasibility tests validate the proposed condition, while narrow-passage floating-body simulations show that maintaining a force-closure configuration reduces the RMS tracking errors in xx, yy, and unwrapped yaw from 12.0512.05 m, 18.1118.11 m, and 535.96∘535.96^\circ to 2.242.24 m, 2.662.66 m, and 2.69∘2.69^\circ, respectively.

Figures & tables

Explore similar work

Oct 3, 2026

DNPush: Distributed Nonparallel Pushing Force Control of Multi-Robot Systems for Object Transportation

This letter proposes DNPush, a Distributed Nonparallel Pushing force controller for cooperative object transport without inter-robot communication. Each robot uses local force measurements, a preassigned force weight, and a locally expressed desired transport direction, without requiring an object model, contact locations, a CoM estimate, or moment arm magnitudes online. DNPush regulates nonparallel force magnitudes from local force direction misalignments through a reciprocal-sine law. Under the stated contact conditions, Lyapunov analysis with LaSalle's invariance principle proves convergence to a unique rotational equilibrium, where perpendicular force contributions cancel and the net torque from normal forces is zero. Object velocity converges to the desired transport direction, and suitable contact regions exist for convex polygons. Simulations isolate the reciprocal-sine scaling mechanism, five-robot coordination, and active rotational damping. Hardware experiments with soft tactile differential-drive robots achieve a velocity direction error of 0.61 deg +/- 0.79 deg over five trials with a fixed transport direction and demonstrate object transport through waypoints with three robots.
Oct 6, 2026

Safe Multi-Robot Collaborative Transport Using Density Functions

This paper presents a hierarchical density-based model predictive control framework for safe collaborative manipulation by multiple quadrupedal robots. The framework enables a team of robots to push a shared object to a desired pose using only the initial and goal poses, without requiring a precomputed reference trajectory. A centralized box-level MPC optimizes contact forces while enforcing a control-density constraint for goal convergence and obstacle avoidance. Each robot then solves its own distributed robot-level whole-body MPC, under a stated shared-information assumption, to track its moving contact location while accounting for static obstacles and the time-varying positions of neighboring robots. The approach is evaluated in MuJoCo using whole-body contact dynamics for two and three Unitree Go2 quadrupeds collaboratively pushing rigid objects through narrow passages. Comparisons with matched Control Barrier Function and RRT* based tracking baselines demonstrate the effectiveness of the proposed density-based formulation for push-only, force- and torque-coupled manipulation tasks. Implementation videos are available at https://jaggu2606.github.io/go2-density-mpc-pushing/
Mar 12, 2026

Push, Press, Slide: Mode-Aware Planar Contact Manipulation via Reduced-Order Models

Non-prehensile planar manipulation, including pushing and press-and-slide, is critical for diverse robotic tasks, but notoriously challenging due to hybrid contact mechanics, under-actuation, and asymmetric friction limits that traditionally necessitate computationally expensive iterative control. In this paper, we propose a mode-aware framework for planar manipulation with one or two robotic arms based on contact topology selection and reduced-order kinematic modeling. Our core insight is that complex wrench-twist limit surface mechanics can be abstracted into a discrete library of physically intuitive models. We systematically map various single-arm and bimanual contact topologies to simple non-holonomic formulations, e.g. unicycle for simplified press-and-slide motion. By anchoring trajectory generation to these reduced-order models, our framework computes the required object wrench and distributes feasible, friction-bounded contact forces via a direct algebraic allocator. We incorporate manipulator kinematics to ensure long-horizon feasibility and demonstrate our fast, optimization-free approach in simulation across diverse single-arm and bimanual manipulation tasks. Supplementary videos and additional information are available at: https://sites.google.com/view/pushpressslide