Optimization-Based Path Planning for Industrial Manipulators: Experimental Validation in Additive Manufacturing
Organizations: ZHAW Centre for Artificial Intelligence, Zürich University of Applied Sciences, Winterthur, 8400, Switzerland
Abstract
Robotic additive manufacturing requires joint paths that reconcile robot feasibility with process-specific geometry. We develop an offline optimization-based path planner that combines joint-path regularity and self-collision penalties with process costs and constraints, so that a new process enters through its own reference, residuals, and tolerances. Full-path and boundary-coupled chunked optimization handle references of different lengths. Iterative Weight Tuning (IWT) determines the cost weights from the gaps between Key Performance Indicators (KPIs) and their targets. In carbon-fiber winding and robotic 3D printing, the planned paths meet the geometric tolerances and all KPI targets, and both paths are executed on a UR10e, without extrusion for printing, with joint-level tracking recorded during execution.
Figures & tables
| Parameter group | Value |
|---|---|
| Common robot settings | |
| Self-clearance (mm) | |
| Numerical clearance tolerance (mm) | |
| Winding parameters | |
| ; , (mm) | |
| (a) KPI targets and evaluated results | ||||
|---|---|---|---|---|
| KPI | Target | Rep. 1 | Rep. 3 | Rep. 5 |
| KPI I: Environment clearance (mm) | ||||
| KPI II: Maximum fiber error ( ∘ ) | ||||
| KPI III: Robot–fiber clearance (mm) | ||||
| KPI IV: Self-clearance (mm) | ||||
| KPIs met | 4 | 2 | 3 | 4 |
Robot Motion Planning
Robot motion planning finds safe, feasible paths and trajectories for robots moving through constrained, changing environments.
See all 290 papers