Robotic additive manufacturing requires joint paths that reconcile robot feasibility with process-specific geometry. We develop an offline optimization-based path planner that combines joint-path regularity and self-collision penalties with process costs and constraints, so that a new process enters through its own reference, residuals, and tolerances. Full-path and boundary-coupled chunked optimization handle references of different lengths. Iterative Weight Tuning (IWT) determines the cost weights from the gaps between Key Performance Indicators (KPIs) and their targets. In carbon-fiber winding and robotic 3D printing, the planned paths meet the geometric tolerances and all KPI targets, and both paths are executed on a UR10e, without extrusion for printing, with joint-level tracking recorded during execution.
Figures & tables
Fig. 1 : Offline planning and online execution pipeline, highlighting the joint-path optimization addressed in this work.
Figure 2
Fig. 2 : Experimental winding setup: (a) UR10e with the robot-mounted winding core and (b) winding core graph representation.
Parameter group
Value
Common robot settings
Self-clearance dsafe,c (mm)
30
Numerical clearance tolerance (mm)
0.030
Winding parameters
M,Nf
(120,24)
ρ1fiber ; ρjfiber , j=2,…,Nf (mm)
(1,2)
TABLE I : Robot and process geometry settings, acceptance tolerances, and printing chunk-boundary weights.
Fig. 3 : Nominal fiber-direction error during winding. Labels e1–e20 identify the edges, and vertical lines mark their boundaries.
Fig. 4 : UR10e joint-position errors during winding, computed as measured position minus the robot-reported target for each of the six joints.
Fig. 5 : Robotic 3D printing: (a) UR10e setup with an extrusion head; (b) reference path colored by averaged nominal TCP position error. Reported maxima use all samples.
(a) KPI targets and evaluated results
KPI
Target
Rep. 1
Rep. 3
Rep. 5
KPI I: Environment clearance (mm)
≥5
−4.677
25.58
23.82
KPI II: Maximum fiber error ( ∘ )
≤2
6.296
2.177
1.998
KPI III: Robot–fiber clearance (mm)
≥2
7.585
8.257
7.525
KPI IV: Self-clearance (mm)
≥25
36.42
36.51
36.58
KPIs met
4
2
3
4
TABLE II : Winding KPI targets and results at selected IWT repetitions, with the corresponding weight progression.
Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Hong Kong, China · Centre for Perceptual and Interactive Intelligence (CPII), Hong Kong, China · Department of Robotics at the School of Mechanical Engineering, Southeast University, China
School of Mechanical, Aerospace, and Manufacturing Engineering, University of Connecticut, Storrs, Connecticut, USA · Department of Mechanical and Industrial Engineering, University of Illinois Chicago, Chicago, IL 60608, USA