cs.RONov 10, 2026

SunLightBots: Turning sunlight into self-sustained, high-power motion in soft robots

Authors: Yoo Jin Lee, Melanie Torres Crespo, Zhongxiao Deng, Andrew Tejada-Vega, Rebecca Kramer-Bottiglio, Wenzhong Yan, Yimin Luo

Organizations: Mechanical Engineering, Yale University, 9 Hillhouse Avenue, New Haven, 06511, CT, USA. · Mechanical and Aerospace Engineering, University of California, Davis, One Shields Avenue, Davis, 95616, CA, USA. · Present Address: Mechanical and Aerospace Engineering, Princeton University, Princeton, 08540, NJ, USA.

Abstract

Soft robots built from active materials can directly convert environmental stimuli into motion, offering a route to energy autonomy and embodied control. However, environmental energy is generally harvested at low power, whereas rapid, mechanically demanding actions require high mechanical output power. Reconciling this mismatch while sustaining self-regulated cyclic actuation is challenging, particularly at the subgram scale, where limited payload capacity constrains the integration of conventional power and control hardware. Here, we present SunLightBots, a class of subgram, sunlight-powered, untethered soft robots that achieve autonomous locomotion under continuous illumination near 1 Sun (100 mW/cm2). Their operation is enabled by a self-resetting snapping (SRS) mechanism that integrates liquid crystal elastomers (LCEs) with snap-through instability to accumulate solar energy supplied at low power, release it as rapid, high-power motion, and reset through photothermal-mechanical feedback. Through coordinated optimization of the LCE actuation temperature, photothermal conversion, actuation stress, and structural energy barrier, the system operates near 1 Sun and achieves a peak mass-specific mechanical power of 89 W/kg. At this irradiance, the optimized LCE generates an actuation stress of 0.1 MPa at approximately 60 deg C. SunLightBots demonstrate sustained swimming, crawling, and repeated impulsive jumping. Under 1.5 Suns, the swimmer advances more than three body lengths per cycle. This work provides a materials-mechanics route toward autonomous soft robots powered entirely by the environment.

Figures & tables

Explore similar work

Jun 12, 2026

An Autonomous Subgram SMA-Based Swimmer

We present the Swima, a bioinspired 900-mg swimmer propelled by two 10-mg high-work-density (HWD) actuators driven by shape-memory alloy (SMA) wires. We integrated onboard power and computation by using a custom-built printed circuit board (PCB) and an 11-mAh 3.7-V 507-mg single-cell lithium-ion (Li-Ion) battery, which in conjunction enable autonomous swimming in excess of 18 min. The Swima can swim at speeds of up to 22.4 mm/s (0.56 Bl/s), achieves turning rates of up to 14°/s, and can follow 0-degree heading reference trajectories with root mean square (RMS) values of tracking errors of about 6.5° across multiple tests. This robot is the first subgram microswimmer with onboard power, actuation, and computation developed to date.
Mar 5, 2026

Control Lyapunov Functions for Underactuated Soft Robots

Soft and soft-rigid hybrid robots are inherently underactuated and operate under tight actuator limits, making task-space control with stability guarantees challenging. Common nonlinear strategies for soft robots (e.g., those based on PD control) often rely on the assumption of full actuation with no actuator limits. This paper presents a general control framework for task-space regulation and tracking of underactuated soft robots under bounded inputs. The method enforces a rapidly exponentially stabilizing control Lyapunov function as a convex inequality constraint while simultaneously satisfying underactuated full-body dynamics and actuator bounds. We validate the approach in simulation on several platforms spanning increasing underactuation: a simple two link tendon-driven "finger", a trimmed helicoid manipulator, and a highly underactuated spiral robot. We compare against a number of baseline methods from the literature. Results show improved task-space accuracy and consistent Lyapunov convergence under input limits, achieving superior set-point and trajectory-tracking performance.
Feb 20, 2026

Snapping Actuators with Asymmetric and Sequenced Motion

Snapping instabilities in soft structures offer a powerful pathway to achieve rapid and energy-efficient actuation. In this study, an eccentric dome-shaped snapping actuator is developed to generate controllable asymmetric motion through geometry-induced instability. Finite element simulations and experiments reveal consistent asymmetric deformation and the corresponding pressure characteristics. By coupling four snapping actuators in a pneumatic network, a compact quadrupedal robot achieves coordinated wavelike locomotion using only a single pressure input. The robot exhibits frequency-dependent performance with a maximum speed of 72.78mm/s at 7.5Hz. These findings demonstrate the potential of asymmetric snapping mechanisms for physically controlled actuation and lay the groundwork for fully untethered and efficient soft robotic systems.