eess.IVNov 13, 2026

D2ToF: One-Step Diffusion for Depth Super-Resolution from Lightweight Single-Photon LiDAR Waveforms

Authors: Pallabjyoti Deka, Lewis Wilson, Stephen McLaughlin, Jonathan Leach, Abderrahim Halimi

Organizations: School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh UK

Abstract

Single-photon LiDAR (SPL) sensors offer exceptional temporal resolution and single-photon sensitivity for depth imaging. However, cost-effective SPL arrays typically suffer from extremely low spatial resolutions (e.g. 8×88\times 8 pixels), limiting their real-world utility. In this paper, we propose a novel, one-step super-resolution framework, D2ToF, Distilled Diffusion for Time-of-Flight, that bridges the gap between high-fidelity generative modeling and real-time execution. Our approach uses an amortized variational distillation strategy that allows for a measurement-based data consistency term to be incorporated directly into the one-step training objective. This encourages that the synthesized high-resolution depth maps are consistent with the captured low-resolution Time-of-Flight (ToF) histograms. To overcome the severe ill-posedness of upsampling extremely degraded inputs, we introduce a multimodal guidance strategy. By leveraging a foundational monocular depth model to extract structural priors from a high-resolution reflectivity image, our network is guided by a rich triad of the ToF histogram, reflectivity map, and relative depth estimate. Experimental results outperform evaluated baselines, achieving 16×16\times spatial super-resolution (from 8×8×1008\times 8 \times 100 histograms to 128×128128\times 128 depth maps) at an accelerated inference speed of approximately 8383 milliseconds.

Figures & tables

Explore similar work

Mar 27, 2026

On-Device Super Resolution Imaging Using Low-Cost SPAD Array and Embedded Lightweight Deep Learning

This work presents a lightweight super-resolution (LiteSR) neural network for depth and intensity images acquired from a consumer-grade single-photon avalanche diode (SPAD) array with a 48x32 spatial resolution. The proposed framework reconstructs high-resolution (HR) images of size 256x256. Both synthetic and real datasets are used for performance evaluation. Extensive quantitative metrics demonstrate high reconstruction fidelity on synthetic datasets, while experiments on real indoor and outdoor measurements further confirm the robustness of the proposed approach. Moreover, the SPAD sensor is interfaced with an Arduino UNO Q microcontroller, which receives low-resolution (LR) depth and intensity images and feeds them into a compressed, pre-trained deep learning (DL) model, enabling real-time SR video streaming. In addition to the 256x256 setting, a range of target HR resolutions is evaluated to determine the maximum achievable upscaling resolution (512x512) with LiteSR, including scenarios with noise-corrupted LR inputs. The proposed LiteSR-embedded system co-design provides a scalable, cost-effective solution to enhance the spatial resolution of current consumer-grade SPAD arrays to meet HR imaging requirements.
Aug 5, 2026

Dense Metric Depth Completion from Sparse Direct Time-of-Flight Sensors

Direct Time-of-Flight (dToF) sensors provide highly accurate metric depth and are more robust than indirect ToF systems in challenging real-world conditions. However, their high manufacturing cost and limited photodiode array size produce depth maps that are extremely sparse, low-resolution, and noisy, making them unsuitable for VR/XR, robotics, and 3D perception tasks that require dense metric depth. Existing monocular and depth completion methods struggle to handle the unique sampling patterns and hardware artifacts of dToF devices, and their performance often deteriorates significantly under severe sparsity or noise. We present a generalizable framework for dense metric depth completion from sparse dToF measurements, capable of operating across diverse sensor types, sparsity levels, and noise conditions. Our model employs a depth-guided dual-branch Vision Transformer encoder that processes RGB images and sparse dToF measurements separately, while a masked joint attention module allows depth tokens to reliably guide image features without being overwritten by them. A lightweight decoder reconstructs dense metric depth efficiently, without diffusion-based or refinement-heavy post-processing. To address the scarcity of paired training data, we introduce a comprehensive dToF simulation pipeline that reproduces the characteristics of flash, sub-VGA flash, and rotating sensors, including hardware-induced degradation, irregular sparsity, and realistic noise distributions. Trained entirely on synthetic data, our model achieves strong zero-shot generalization across 6 datasets and 3 real dToF devices, outperforming state-of-the-art approaches in both accuracy and computational efficiency. This establishes a robust and practical solution for dense metric depth completion from sparse direct ToF sensors. Our code and models are open-sourced. See https://vclab.kaist.ac.kr/cvpr2026p3.
Jun 26, 2026

Fast and Accurate Outlier-Aware LiDAR Super-Resolution for SLAM Applications

This work tackles the challenge of enhancing low-resolution LiDAR sensors for SLAM applications through a novel Deep Unrolling-based Super-Resolution (SR) model. We integrate an outlier removal module to ensure structural integrity while maintaining real-time performance. By leveraging a model-based optimization approach, our method efficiently reconstructs high-resolution point clouds while minimizing computational overhead. The proposed SR model is evaluated within a LiDAR SLAM framework, demonstrating significant improvements in pose estimation accuracy and efficiency compared to state-of-the-art SR methods.