cs.RONov 14, 2026

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

Authors: Matthias Jammot, Pembe Gizem Özdil

Organizations: Harvard University · Kempner Institute for the Study of Natural and Artificial Intelligence

Abstract

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

Figures & tables

Explore similar work

Sep 25, 2026

Impedance Cloning: Learning Equilibrium Point Parameters for Contact-Rich Manipulation

Contact-rich manipulation requires robots to regulate force against surfaces whose geometry deviates unpredictably from training conditions. Trajectory-based imitation learning, which reproduces observable outputs, breaks down under such shifts. We propose Impedance Cloning, which instead imitates the biomechanical priors that generate motion -- the stiffness and equilibrium point -- and thereby passively absorbs contact uncertainty. Because these parameters encode intent rather than outcome, they generalize across surface geometries where trajectory reproduction does not. We extract them from bilateral teleoperation demonstrations via a particle filter without force/torque sensors and evaluate the framework on two CRANE-X7 manipulators. In a wiping task with joint-space actions, the trajectory-based baseline loses contact below -6 cm, whereas the proposed method maintains a consistent 4-5 N contact force above -6 cm, with a gradual decrease below; with Cartesian-space actions, its force-height slope over 0 to +8 cm is 0.13 +/- 0.03 N/cm, versus 0.34-0.83 N/cm for fixed-impedance baselines. In a pick-and-place task with 10 diverse cups (100 trials), the proposed method succeeds in 84 trials, outperforming the fixed-impedance baseline (74/100) and performing comparably to a variable impedance control baseline (82/100) with one demonstration instead of ten. In a grasping task, the representation reduces torque tracking error with both ILBiT and Mamba backbones, confirming its generality across architectures.
Sep 14, 2026

Continuous Manifold-Decomposed Impedance Retargeting for Contact-Rich Imitation Learning

CMDIR extends Manifold-Decomposed Impedance Retargeting (MDIR) to transform fixed-impedance demonstrations into continuous variable-impedance controllers, which can also serve as structured supervision for imitation learning. Continuous Task-Manifold Impedance Representation (TMIR) pairs an evolving task frame with controller instructions. Demo-relative Compromise dynamics retain moving-basis transport and control/physical metric mismatch, yielding displacement, reaction-impulse, and perturbation-sensitivity criteria. Quality-to-Fast automatically compiles a solver structure from development paths within a predefined finite space, re-instantiates that structure for each demonstration, and certifies the resulting candidate by multi-resolution evaluation. Across 225 retargeted-controller trials in three real contact tasks, full CMDIR improves mean task-proxy retention and reduces mean pose deviation, force fluctuation, and peak force relative to discrete MDIR. FastMPO achieves a 5.85.8--9.4×9.4\times speedup over C-MPO with comparable closed-loop outcomes. Downstream experiments demonstrate learnability of the complete TMIR supervision interface; lower force fluctuation and peak force are observed among successful executions, while completion reliability remains uneven across tasks and environments.
Mar 26, 2026

Towards Embodied AI with MuscleMimic: Unlocking full-body musculoskeletal motor learning at scale

Learning motor control for muscle-driven musculoskeletal models is hindered by the computational cost of biomechanically accurate simulation and the scarcity of validated, open full-body models. Here we present MuscleMimic, an open-source framework for scalable motion imitation learning with physiologically realistic, muscle-actuated humanoids. MuscleMimic provides two validated musculoskeletal embodiments - a fixed-root upper-body model (126 muscles) for bimanual manipulation and a full-body model (416 muscles) for locomotion - together with a retargeting pipeline that maps SMPL-format motion capture data onto musculoskeletal structures while preserving kinematic and dynamic consistency. Leveraging massively parallel GPU simulation, the framework achieves order-of-magnitude training speedups over prior CPU-based approaches while maintaining comprehensive collision handling, enabling a single generalist policy to be trained on hundreds of diverse motions within days. The resulting policy faithfully reproduces a broad repertoire of human movements under full muscular control and can be fine-tuned to novel motions within hours. Biomechanical validation against experimental walking and running data demonstrates strong agreement in joint kinematics (mean correlation r = 0.90), while muscle activation analysis reveals both the promise and fundamental challenges of achieving physiological fidelity through kinematic imitation alone. By lowering the computational and data barriers to musculoskeletal simulation, MuscleMimic enables systematic model validation across diverse dynamic movements and broader participation in neuromuscular control research. Code, models, checkpoints, and retargeted datasets are available at: https://github.com/amathislab/musclemimic