M-CROSS: A Multisensor Simulation Dataset for SLAM across Water--Land Transitions
Authors: Yan Dong, Tianyi Wu, Junyu Yang, Shaoqiang Qiu, Zefeng Yan, Tao Zhang, Bin Han
Organizations: School of Automation, Tsinghua University, Beijing, China · State Key Laboratory of Intelligent Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China · School of Automation and Software Engineering, Shanxi University, Shanxi, China
Water--land cross-domain robots require continuous localization across land, transition and underwater phases, where sensor characteristics and availability change abruptly. Existing datasets and conventional metrics are not designed to capture transition-induced degradation and failures. We present M-CROSS, to the best of our knowledge, the first multisensor simulation dataset and benchmark for SLAM across continuous water--land transitions. It provides synchronized LiDAR, sonar, stereo camera, IMU, DVL, and depth measurements; 6DoF pose ground truth; sensor-wise medium-state annotations; and medium-dependent sensor degradation models. We establish a transition-aware protocol comprising the Trajectory Completion Rate (TCR), Piecewise Absolute Pose Error (PW-APE), Transition End Error (TEE), and Transition Survival Period (TSP), which measure trajectory completion, single-domain accuracy, transition-induced error, and localization survival under prolonged partial immersion, respectively. Experiments with 6 representative SLAM systems show that existing methods fail to maintain both localization accuracy and trajectory continuity across the full set of water--land transitions, exhibiting transition-induced drift, trajectory discontinuities, and tracking failures. M-CROSS is publicly available https://anonymous.4open.science/r/MCross-Dataset
Figures & tables
Fig. 1: Overview of the M-CROSS simulation scene. The cross-domain robot traverses from one riverbank to the other through continuous land–water transitions. Representative LiDAR, camera, and sonar measurements are shown at the bottom.
Fig. 2: Overview of the dataset construction and benchmarking workflow.
Sensor
Rate
Key Configuration
Stereo RGB
20 Hz
1280×720 , 0.107 m baseline
LiDAR
10 Hz
32 channels, 360∘×30∘ FoV
Sonar
5 Hz
130∘×20∘ FoV, 0.5–10 m range
Depth Sensor
5 Hz
0–16 bar, 0.01 m depth noise std.
DVL
5 Hz
0.05–125 m bottom-track range, 0.005 m/s velocity noise std.
IMU
200 Hz
60μg/Hz acc., 0.007∘/s/Hz gyro. noise density
TABLE I: Key sensor parameters of M-CROSS
Seq.
Domain Pattern
Traversal Description
Dur. (s)
Len. (m)
seq01
LTU
Nominal land-to-underwater entry over flat terrain, with rocks and a submerged wreck
39.32
45.59
seq02
UTL
Nominal underwater-to-land exit over flat terrain, with rocks and a submerged wreck
39.89
45.05
seq03
LTU
Challenging land-to-underwater entry over rough terrain, with rocks, vegetation, a floating boat, and swimming fish
61.22
69.28
seq04
UTL
Challenging underwater-to-land exit over rough terrain, with rocks, vegetation, a floating boat, and swimming fish
86.54
64.40
seq05
LTUTL
Land–underwater–land loop over rough terrain, with trees, rocks, vegetation, a floating boat, and swimming fish
103.88
117.69
seq06
UTLTU
Underwater–land–underwater loop over rough terrain, with trees, rocks, vegetation, a floating boat, and swimming fish
87.38
101.90
TABLE II: Overview of the M-CROSS dataset sequences and their cross-domain traversal patterns.
Fig. 3: Overview of the M-CROSS environment and sequence trajectories. The central panel shows the overall simulation environment and the trajectories of all eight sequences, while panels (a)–(e) present representative views of different regions and environmental elements. Star and triangle markers indicate the starting and ending points of the trajectories, respectively. For each sequence, trajectory segments above the water surface are shown as solid lines, whereas underwater segments are shown as dashed lines.
Fig. 4: Definition of cross-domain phases. A completed Transition spans the first body–surface intersection ( tts ) to full entry into the target medium ( tte ); an incomplete crossing remains in the Transition phase until the annotated endpoint tc .
Seq.
Fast-LIO2 [ 25 ]
Bruce-SLAM [ 26 ]
ORB-SLAM3 [ 27 ]
VINS-Fusion [ 28 ]
LVI-SAM [ 29 ]
Fast-LIVO2 [ 30 ]
seq01
36.75% (U 1 )
0.00% (I)
9.48% (L 1 )
100.00%
48.53% (U 1 )
28.18% (T 1 )
seq02
12.90% (U 1 )
77.39% (T 1 )
16.91% (U 1 )
17.36% (U 1 )
10.19% (U 1 )
0.00% (I)
seq03
0.00% (I)
0.00% (I)
20.53% (T 1 )
100.00%
57.17% (U 1 )
24.75% (T 1 )
seq04
4.58% (U 1 )
0.00% (I)
8.73% (U 1 )
100.00%
10.28% (U 1 )
0.00% (I)
seq05
13.84% (U 1 )
0.00% (I)
5.92% (T 1 )
100.00%
13.37% (U 1 )
9.19% (T 1 )
seq06
5.62% (U 1 )
29.35% (U 1 )
20.25% (U 1 )
100.00%
4.47% (U 1 )
0.00% (I)
TABLE III: Trajectory completion rate of six SLAM methods on all eight M-CROSS sequences.
Fig. 5: Trajectory comparison of the evaluated SLAM methods on all eight M-CROSS sequences. Each subfigure shows top-down 2-D projections of the estimated and ground-truth trajectories. Star and triangle markers indicate the starting and ending points of the trajectories, respectively.
Method
Single-domain performance
Transition-phase performance
Valid SD-Seg. ∗ ↑
PW-APEP/R (m/ ∘ ) ↓
Valid Trans. ∗ ↑
TEEP/R (m/ ∘ ) ↓
Fast-LIO2 [ 25 ]
7
0.57 / 1.03
1
1.03 / 2.07
Bruce-SLAM [ 26 ]
1
0.56 / 0.78
0
N/A / N/A
ORB-SLAM3 [ 27 ]
4
0.69 / 0.54
1
3.10 / 21.21
VINS-Fusion [ 28 ]
19
1.03 / 1.17
12
0.25 / 0.69
LVI-SAM [ 29 ]
9
0.96 / 1.10
2
1.80 / 0.30
TABLE IV: Dataset-level summary of PW-APE and mean TEE on M-CROSS.
Method
TSP 0.5
TSP 1
TSP 2
Fast-LIO2 [ 25 ]
7.59
33.90
33.90
ORB-SLAM3 [ 27 ]
0.10
0.33
1.20
VINS-Fusion [ 28 ]
0.87
1.41
1.49
LVI-SAM [ 29 ]
3.96
4.02
4.14
Fast-LIVO2 [ 30 ]
0.87
1.74
3.21
TABLE V: TEP under different position-error thresholds on seq08 .
Fig. 6: Comparison of vertical-position estimates during a land-to-underwater transition. (a) Methods relying on a single primary exteroceptive sensor exhibit substantial drift or tracking termination as the sensing medium changes. (b) Camera–LiDAR fusion methods maintain better trajectory continuity and reduce the localization error, but noticeable deviations remain during the transition and underwater phases. The shaded regions indicate the land, transition, and underwater phases.
Massachusetts Institute of Technology (MIT), Cambridge, MA, USA · SINTEF, Trondheim, Norway · Department of Marine Technology, Norwegian University of Science and Technology (NTNU), Trondheim, Norway