cs.CVNov 16, 2026

Pointillist Maize: 3D Reconstruction of Field-Grown Maize Using RGB UAV Imagery

Authors: Dewi Endah Kharismawati, Toni Kazic

Organizations: Department of Electrical Engineering and Computer Science, University of Missouri, Columbia, MO, USA · Missouri Maize Center, University of Missouri, Columbia, MO, USA · Interdisciplinary Plant Group, University of Missouri, Columbia, MO, USA · Department of Food, Agricultural and Biological Engineering, The Ohio State University, Columbus, OH, USA · 

Abstract

Three-dimensional reconstruction can extend field phenotyping to individual maize organs, but thin, flexible, occluding structures and plant movement complicate reconstruction. We evaluated whether consumer-grade UAV RGB video processed with Structure from Motion and multi-view stereo could recover recognizable field-grown maize structures, and examined the effects of acquisition trajectories and frame sampling. COLMAP reconstructions preserved recognizable leaves, stems, tassel branches, ears, silks, and brace roots. For an equal-frame comparison, we reconstructed one plant from two sets of 295 frames from the same video: a single orbit sampled at 5 frames/second and three orbits at different altitudes (ribbon skirt) sampled at 2 frames/second. After ground removal, the reconstructions contained 520,601 and 375,318 points, respectively. The single orbit yielded greater point concentration within plant structures and fewer visible gaps, while the ribbon skirt yielded fewer scattered points and slightly lower proportions of isolated points. In densely planted nursery rows, visible voids occupied 17.57% of the rendered scene with one orbit at 1 frame/second, decreasing to 5.07% with additional serpentine passes and 2.68% when the original orbit was sampled at 3 frames/second. Additional observations also increased point dispersion associated with plant movement. A curlicue trajectory tested in a different field in 2024 produced distinguishable individual plants without visible duplicated structures, although substantial voids remained, mainly on the soil surface. These results demonstrate the feasibility of recovering recognizable maize organs from consumer UAV imagery and reveal trade-offs between acquisition strategies, reconstruction completeness, and point dispersion. Independent geometric validation is still needed before quantitative phenotyping.

Figures & tables

Explore similar work

Aug 3, 2026

UAV3DCrop: Benchmarking 3D Reconstruction in Repeated Multi-Angle UAV Crop Surveys

Accurate 3D crop monitoring underpins data-driven precision agriculture by enabling field-scale analysis of plant structure, growth dynamics, and management response. Modern 3D reconstruction methods perform strongly on generic benchmarks, but rendered appearance may not translate into metrically and agronomically useful geometry in crop fields. We introduce UAV3DCrop, a public benchmark of repeated multi-angle unmanned aerial vehicle (UAV) crop surveys. It contains 88,830 RGB images at 5280×39565280 \times 3956 pixels, with a ground sampling distance of 3.6-5.8 mm, from 91 scenes spanning corn, soybean, wheat, and oat. Track A evaluates seven scene-optimized methods -- Neural Radiance Field (NeRF) and 3D Gaussian Splatting (3DGS) variants -- on held-out views, photogrammetry-referenced depth, and canopy-height recovery. Track B tests four pretrained feed-forward models on zero-shot camera-pose and geometry estimation. The scene-optimized methods rank differently across the three targets: Splatfacto-big leads appearance, whereas Scaffold-GS leads depth and is statistically tied with Splatfacto for canopy height. Among feed-forward models, MapAnything leads on seven of the eight metrics, while the remaining models vary more across crops and fail severely on absolute scale in a way that alignment conceals. Repeated acquisitions reveal further sensitivities that differ by output type and by model, associated with position within the acquisition sequence and with tie-point multiplicity. Current 3D reconstruction methods are therefore not yet interchangeable for agronomic use: no single method wins on appearance, geometry, and canopy height at once, and only one of four feed-forward models recovers usable metric scale. The dataset is publicly available at https://link-dev.github.io/UAV3DCrop/
Sep 1, 2026

Automated Maize Ear Phenotyping Using 3D Reconstructions

Maize kernel traits such as row number, kernels per row, and kernel size vary largely for genetic reasons and are consistently associated with regions of the genome that influence yield. Manual measurement of these traits, however, cannot keep pace with the volume of maize generated in a breeding program. To address this, we developed and validated a fully automated pipeline for extracting these traits from 3D point clouds of corn ears, built on a recently developed video-to-point-cloud platform. Raw video frames are processed through COLMAP and NeRF, the ear is isolated via density-based separation, and the point cloud is distance-calibrated to physical units. The calibrated ear point cloud was Z-axis aligned via PCA and cylindrically unwrapped to a 2D image. We enhanced contrast and performed zero-fine-tuning instance segmentation using Cellpose-SAM. A triple-juxtaposed unwrap strategy was used to prevent double-counting at the seam. The pipeline achieved kernel count R^2 = 0.921 (MAPE = 10.33%) and kernel row number within +-2 rows for 95.2% of ears (MAE = 0.75 rows) on a 168-ear held-out set from the 268-ear labeled dataset. The resulting multi-trait dataset has known genotype identity for each ear, positioning it for phenotype-to-genotype association analyses.
Oct 2, 2026

A Vision-Language Model (VLM)-based Pipeline for End-to-End Procedural Modeling of Field-Grown Maize from Point Clouds

Editable 3D models of field-grown crops support high-throughput phenotyping and in silico breeding trials, but building them from scanned point clouds requires organ-level segmentation and fitting. Procedural generators can turn an organ-level parameter set into an analysis-suitable 3D model, but obtaining that set requires hours of manual tuning per plant or segmentation models trained on species-specific labels. We present an automated pipeline that reconstructs procedural maize models from raw 3D point clouds without manual tuning or species-specific training data. A multimodal vision-language model (VLM) annotates leaf midlines in rendered orthographic views. Deterministic geometric algorithms back-project the annotations onto the point cloud, merge them into 3D leaves by cross-view consensus, and grow the midlines to full blades on an orientation-weighted surface graph. Measured organ parameters populate a plant descriptor for a Non-Uniform Rational B-Spline (NURBS)-based procedural model generator. Each leaf surface is then refined against its scan points by differentiable NURBS fitting. The pipeline reached a median whole-plant Chamfer distance of 5.4 mm on 100 genotypically diverse field-grown maize plants from the MaizeField3D dataset. The reconstructions were closer to the scans than those of an earlier semi-automated pipeline based on manual annotations. The pipeline recovered 1,017 of 1,023 (99.4%) curated reference leaves at an intersection-over-union of at least 0.5 without using those labels as input. These results show that VLM annotations become usable organ-level measurements when downstream geometric stages can correct them. This makes automated generation of editable 3D plant assets feasible at the scale of modern phenotyping experiments.