cs.RONov 17, 2026

Pressure Drop: Gravity Vector Estimation from a Distributed Barometric Pressure Sensor Array

Authors: William Dubois, Nicolas Lauzon, Johann Laconte, François Pomerleau

Organizations: Northern Robotics Laboratory, Université Laval, Québec City, Canada · Université Clermont Auvergne, INRAE, UR TSCF, 63000, Clermont-Ferrand, France

Abstract

While gravity is often used in mobile robotics as a global constraint for Simultaneous Localization and Mapping (SLAM) algorithms, most estimation methods rely on indirect observation of the gravity vector. In this paper, we propose the use of altimeter measurements to directly observe the direction of the gravity vector. We provide a theoretical evaluation of the estimation noise and validate it through extensive experimental data, along with an evaluation of the impact of intersensor distance on our gravity vector estimates. Experimental results demonstrate that a median error of 0.87∘0.87^\circ on the tilt estimation can be achieved with our system in semi-static scenarios. Furthermore, we demonstrate the potential of this approach by comparing it with state-of-the-art methods based on Inertial Measurement Units (IMUs). We highlight that we achieve similar performance to that of IMU-based systems in highly dynamic scenarios and even outperform in specific cases of accelerometer measurement saturation. Finally, an additional experiment shows the potential use within a robotic system through the integration into an Iterative Closest Point (ICP) algorithm.

Figures & tables

Explore similar work

Jul 14, 2026

Attitude Estimation Using Inertial and Barometric Measurements

Accurate and robust attitude estimation is a key challenge for autonomous vehicles, particularly in GNSS-denied conditions and during highly accelerated flight. In such conditions, Inertial Measurement Units (IMUs) alone are insufficient for reliable tilt estimation due to the ambiguity between gravitational and inertial accelerations. Although auxiliary velocity sensors such as GNSS, Pitot tubes, Doppler radar, or Visual Inertial Odometry are commonly used, they may be unavailable, intermittent, or costly. This paper introduces a barometer-aided attitude estimation architecture that exploits barometric altitude measurements to provide complementary information on the vehicle's vertical motion, thereby enhancing attitude estimation within nonlinear observers on SO(3). The contributions are twofold. First, we design a deterministic Riccati observer cascaded with a complementary filter, ensuring almost-global asymptotic stability (AGAS) under a uniform observability (UO) condition while preserving the geometric structure of the attitude dynamics. Second, we propose a nonlinear observer evolving on SO(3)xR2, which integrates IMU measurements as inputs and barometer and magnetometer measurements as outputs within a unified framework, guaranteeing local exponential stability (LES) under relaxed uniform observability conditions. The proposed approaches are validated using both simulated and real flight data. The results demonstrate that barometer-aided estimation provides a lightweight, reliable, and effective complementary sensing modality for attitude estimation in minimal-sensing configurations, offering a practical alternative when conventional velocity measurements are unavailable or degraded.
Nov 17, 2025

GaRLILEO: Gravity-aligned Radar-Leg-Inertial Enhanced Odometry

Deployment of legged robots for navigating challenging terrains (e.g., stairs, slopes, and unstructured environments) has gained increasing preference over wheel-based platforms. In such scenarios, accurate odometry estimation is a preliminary requirement for stable locomotion, localization, and mapping. Traditional proprioceptive approaches, which rely on leg kinematics sensor modalities and inertial sensing, suffer from irrepressible vertical drift caused by frequent contact impacts, foot slippage, and vibrations, particularly affected by inaccurate roll and pitch estimation. Existing methods incorporate exteroceptive sensors such as LiDAR or cameras. Further enhancement has been introduced by leveraging gravity vector estimation to add additional observations on roll and pitch, thereby increasing the accuracy of vertical pose estimation. However, these approaches tend to degrade in feature-sparse or repetitive scenes and are prone to errors from double-integrated IMU acceleration. To address these challenges, we propose GaRLILEO, a novel gravity-aligned continuous-time radar-leg-inertial odometry framework. GaRLILEO decouples velocity from the IMU by building a continuous-time ego-velocity spline from SoC radar Doppler and leg kinematics information, enabling seamless sensor fusion which mitigates odometry distortion. In addition, GaRLILEO can reliably capture accurate gravity vectors leveraging a novel soft S2-constrained gravity factor, improving vertical pose accuracy without relying on LiDAR or cameras. Evaluated on a self-collected real-world dataset with diverse indoor-outdoor trajectories, GaRLILEO demonstrates state-of-the-art accuracy, particularly in vertical odometry estimation on stairs and slopes. We open-source both our dataset and algorithm to foster further research in legged robot odometry and SLAM. https://garlileo.github.io/GaRLILEO
Mar 20, 2026

GravCal: Single-Image Calibration of IMU Gravity Priors with Per-Sample Confidence

Gravity estimation is fundamental to visual-inertial perception, augmented reality, and robotics, yet gravity priors from IMUs are often unreliable under linear acceleration, vibration, and transient motion. Existing methods often estimate gravity directly from images or assume reasonably accurate inertial input, leaving the practical problem of correcting a noisy gravity prior from a single image largely unaddressed. We present GravCal, a feedforward model for single-image gravity prior calibration. Given one RGB image and a noisy gravity prior, GravCal predicts a corrected gravity direction and a per-sample confidence score. The model combines two complementary predictions, including a residual correction of the input prior and a prior-independent image estimate, and uses a learned gate to fuse them adaptively. Extensive experiments show strong gains over raw inertial priors: GravCal reduces mean angular error from 22.02° (IMU prior) to 14.24°, with larger improvements when the prior is severely corrupted. We also introduce a novel dataset of over 148K frames with paired VIO-derived ground-truth gravity and Mahony-filter IMU priors across diverse scenes and arbitrary camera orientations. The learned gate also correlates with prior quality, making it a useful confidence signal for downstream systems.