Feedback-Linearised Trajectory Tracking via Model-Informed Robust Geometric DDPC
Organizations: Indian Institute of Technology Bombay · Plaksha University
Abstract
Data-driven predictive control (DDPC) predicts system responses from recorded trajectories, but nonlinear dynamics can limit the accuracy of fixed linear predictors. This paper studies geometric robust DDPC for trajectory tracking of a fully actuated manipulator using model-based feedback linearisation. A mechanical model maps virtual acceleration commands into joint torques, while recorded data capture residual dynamics arising from imperfect model parameters. The controller minimises worst-case prediction error over an open Grassmannian ball centred at the fitted trajectory subspace. Simulations on a planar 2R manipulator under gravity compare the proposed method with double-integrator model predictive control (MPC) and direct regularised data-enabled predictive control (DeePC). Results show improved tracking over double-integrator MPC despite increased torque effort, while performance relative to DeePC depends on the reference trajectory.
Figures & tables
| Condition | Studies | Lengths [m] | True masses [kg] | Model masses [kg] |
|---|---|---|---|---|
| Exact parameters | A, C | |||
| Parameter errors | A, C | |||
| Arm A | B | |||
| Arm B | B |
| Mechanics | [rad] | Double integrator | Learned behaviour |
|---|---|---|---|
| Exact parameters | 0.001 | 0.0098 [0.0068, 0.0110] | 0.0058 [0.0051, 0.0070] |
| 0.005 | 0.0157 [0.0118, 0.0191] | 0.0129 [0.0094, 0.0147] | |
| 0.010 | 0.0251 [0.0213, 0.0279] | 0.0200 [0.0191, 0.0242] | |
| Parameter errors | 0.001 | 0.2096 [0.1831, 0.2496] | 0.0153 [0.0131, 0.0194] |
| 0.005 | 0.1801 [0.1510, 0.2207] | 0.0167 [0.0104, 0.0183] | |
| 0.010 | 0.1598 [0.1292, 0.1916] | 0.0234 [0.0187, 0.0270] |
| Condition | Controller | |||
|---|---|---|---|---|
| Arm A, | Geometric DDPC | 0.0042 [0.0038, 0.0054] | 2.984 | 6/6 |
| Direct DeePC | 0.0245 [0.0236, 0.0266] | 2.961 | 6/6 | |
| Arm A, | Geometric DDPC | 0.0138 [0.0116, 0.0164] | 2.977 | 6/6 |
| Direct DeePC | 0.0370 [0.0285, 0.0545] | 2.955 | 6/6 | |
| Arm A, | Geometric DDPC | 0.0280 [0.0210, 0.0345] | 3.560 | 6/6 |
| Direct DeePC | 0.0662 [0.0369, 0.2517] | 2.949 | 5/6 |
| Reference | Centre [rad] | Amplitudes [rad] | Period [s] |
|---|---|---|---|
| Base | 6 | ||
| Shifted | 6 | ||
| Faster | 4.5 |
| Condition, cycle | Controller | |||
|---|---|---|---|---|
| Exact parameters, base | Double-integrator MPC | 0.0050 [0.0046, 0.0053] | 2.703 | 6/6 |
| Geometric DDPC | 0.0050 [0.0047, 0.0064] | 2.690 | 6/6 | |
| Direct DeePC | 0.0253 [0.0213, 0.0292] | 2.665 | 6/6 | |
| Parameter errors, base | Double-integrator MPC | 0.1091 [0.1090, 0.1093] | 2.810 | 6/6 |
| Geometric DDPC | 0.0650 [0.0482, 0.0749] | 3.030 | 6/6 | |
| Direct DeePC | 0.0826 [0.0636, 0.0848] | 2.530 | 6/6 |
Appendix figures & tables2 assets
Supplementary material from the paper’s appendix.
Appendix
| Numerical setting | Value |
|---|---|
| Exchange iteration limit | 20 |
| Adverse search | Three starts, up to 80 iterations each |
| Master / spectral-search limits | 500 / 80 iterations |
| Relative outer / adverse gap targets | / |
| Inner / master tolerances | / |
| Extracted chart radius | At most |
| Setting | Value |
|---|---|
| Predictive / torque-update periods | , |
| History, horizon and rank | , , ; in |
| Offline data per method and trial | Eight episodes of 60 samples; 392 windows |
| Collection gains and excitation | , ; excitation standard deviation per joint |
| Baseline position noise | per joint |
| Observer uncertainty | ; initial position and velocity standard deviations and |
Data-Driven Control
Data-driven control uses measured data and learned models or policies to control systems when accurate first-principles models are unavailable.
See all 42 papers