cs.AINov 19, 2026

From AI Surrogate to Engineering Tool: Toward Production Use of Fiber-Orientation Prediction in Crash CAE

Authors: Osamu Ito, Yoshikazu Nakagawa, Tomoaki Tatsukawa

Organizations: Honda R&D Co., Ltd., 4630 Shimotakanezawa, Haga-machi, Haga-gun, Tochigi 321-3393, Japan · Tokyo University of Science, 6-3-1 Niijuku, Katsushika-ku, Tokyo 125-8585, Japan

Abstract

Crash simulations of glass-fiber-reinforced plastic parts are highly sensitive to the fiber-orientation field supplied to the material model. In conventional workflows, that field comes from resin-flow analysis, which requires molding-specialist support and takes about 25 hours of work per part. We previously proposed a surrogate model that addresses this bottleneck by predicting the orientation field in about 3 minutes. This paper reports the implementation, validation, and operational design that turned the model into an engineering tool for Honda design workflows. We present staged validation from 2D plates to production parts, evaluation against a predefined engineering angular-error criterion, and the expert review that approved design use in March 2025; the system has since been transferred to the crash-safety group and is in initial, limited use in directed fracture-prediction scenarios. The developed system combines injection-gate setting support for cases in which gates are unknown (90% gate-count accuracy, mean position error 11% of flow length), voxelization, surrogate inference, automatic mapping to the crash CAE model, and report generation in a single GUI. The complete orientation-preparation workflow takes about 0.1 hours, a 99.6% reduction from the conventional 25-hour flow-analysis route, and can be run directly by crash CAE engineers without molding-specialist support. As evidence of practical impact, component-level crash analysis using the predicted orientation field reduced the absolute peak-force error from 19.0% with an isotropic baseline to 11.4%, while confining predicted fracture to the test-observed region. The deployment lesson is that a surrogate model alone is not enough for practical adoption: gate-setting support, automatic data conversion, and shareable reporting are what make the model usable as a design tool.

Figures & tables

Explore similar work

Jun 16, 2026

Surrogate Assisted Pedestrian Protection Design via a Foundation Model Orchestrated Workflow

AI-driven engineering workflows face particular challenges in crash safety design: unlike aerodynamics, crash events involve highly nonlinear contact dynamics, material nonlinearity, and discrete state transitions that are difficult to capture with data-driven surrogate models. To the best of our knowledge, we present the first foundation model--orchestrated workflow for crash safety design that enables surrogate-assisted exploration for pedestrian protection, reducing evaluation time from hours per CAE simulation to seconds. The workflow integrates four components: (1) a surrogate trained on CAE crash simulations to predict pedestrian leg injury metrics from design parameters, achieving an average R2=0.87R^2=0.87 and providing distribution-free conformal prediction intervals; (2) multiobjective evolutionary search (NSGA-II) to discover diverse feasible parameter sets under user-specified constraints; (3) a morphing-based geometry generator that maps parameters to topology-preserving 3D shapes; and (4) a natural-language interface in which an LLM orchestrates the workflow and a vision--language model supports semantic comparison of generated designs. In an automotive front-bumper case study, the workflow produces 35 distinct safety-compliant alternatives from a single exploration, a process that would require weeks with conventional CAE iteration. These results suggest that foundation models can serve as integration layers between ML surrogates and physics-based simulation, helping bring AI capabilities to safety-critical engineering domains.
May 12, 2026

Crash Assessment via Mesh-Based Graph Neural Networks and Physics-Aware Attention

Full-vehicle crash simulations are computationally expensive, limiting their use in iterative design exploration. This work investigates learned hybrid surrogate models (MeshTransolver, MeshGeoTransolver, and MeshGeoFLARE) for predicting time-resolved structural deformation fields in an industrial lateral pole-impact benchmark. We evaluate whether neural surrogates can reproduce full-field crash kinematics with sufficient accuracy, spatial regularity, and structural plausibility for engineering interpretation. The proposed architectures combine local mesh message passing, geometry-aware global attention, and sparse contact-aware correction for autoregressive crash rollout. We compare mesh-based graph neural networks, attention-based geometric models, and hybrid architectures under a common training and hyperparameter configuration. The hybrid models capture both short-range structural interactions and long-range deformation patterns, while a sparse contact-aware variant assesses the effect of dynamic proximity interactions during rollout. On a 25-sample full-vehicle test set, the best hybrid model achieves a temporal mean root-mean-square error of 3.20 mm. While geometry-aware attention baselines are quantitatively competitive, qualitative side-view inspection shows they can introduce local spatial noise and deformation irregularities that complicate structural interpretation. In contrast, hybrid mesh-attention models provide the best balance between scalar accuracy, survival-space consistency, and physically interpretable displacement fields. These results suggest that crash surrogate assessment should combine global error metrics with downstream safety-relevant quantities and qualitative field inspection. The proposed methodology enables fast full-field predictions while preserving essential structural information for industrial crash-engineering analysis.
Apr 17, 2026

FLARE: A Data-Efficient Surrogate for Predicting Displacement Fields in Directed Energy Deposition

Directed energy deposition (DED) produces complex thermo-mechanical responses that can lead to distortion and reduced dimensional accuracy of a manufactured part. Thermo-mechanical finite element simulations are widely used to estimate these effects, but their computational cost and the complexity of accurately capturing DED physics limit their use in design iteration and process optimization. This paper introduces FLARE (Field Prediction via Linear Affine Reconstruction in wEight-space), a data-efficient surrogate modeling framework for predicting post-cooling displacement fields in DED from geometric and process parameters. We develop a predefined-geometry DED simulation workflow using an open-source finite element framework and generate a dataset of simulations with varying geometry, laser power, and deposition velocity. Each simulation provides full-field displacement, stress, strain, and temperature data throughout the manufacturing process. FLARE encodes each simulation as an implicit neural field and regularizes the corresponding neural-network weights so that they follow the affine structure of the input parameter space. This enables prediction of unseen parameter combinations by reconstructing network weights through affine mixing of training examples. On this DED benchmark, the method shows improved accuracy compared to baseline methods in both in-distribution and extrapolation settings. Although the present study focuses on DED displacement prediction, the proposed affine weight-space reconstruction framework offers a promising approach for data-efficient surrogate modeling of physical fields.