From AI Surrogate to Engineering Tool: Toward Production Use of Fiber-Orientation Prediction in Crash CAE
Organizations: Honda R&D Co., Ltd., 4630 Shimotakanezawa, Haga-machi, Haga-gun, Tochigi 321-3393, Japan · Tokyo University of Science, 6-3-1 Niijuku, Katsushika-ku, Tokyo 125-8585, Japan
Abstract
Crash simulations of glass-fiber-reinforced plastic parts are highly sensitive to the fiber-orientation field supplied to the material model. In conventional workflows, that field comes from resin-flow analysis, which requires molding-specialist support and takes about 25 hours of work per part. We previously proposed a surrogate model that addresses this bottleneck by predicting the orientation field in about 3 minutes. This paper reports the implementation, validation, and operational design that turned the model into an engineering tool for Honda design workflows. We present staged validation from 2D plates to production parts, evaluation against a predefined engineering angular-error criterion, and the expert review that approved design use in March 2025; the system has since been transferred to the crash-safety group and is in initial, limited use in directed fracture-prediction scenarios. The developed system combines injection-gate setting support for cases in which gates are unknown (90% gate-count accuracy, mean position error 11% of flow length), voxelization, surrogate inference, automatic mapping to the crash CAE model, and report generation in a single GUI. The complete orientation-preparation workflow takes about 0.1 hours, a 99.6% reduction from the conventional 25-hour flow-analysis route, and can be run directly by crash CAE engineers without molding-specialist support. As evidence of practical impact, component-level crash analysis using the predicted orientation field reduced the absolute peak-force error from 19.0% with an isotropic baseline to 11.4%, while confining predicted fracture to the test-observed region. The deployment lesson is that a surrogate model alone is not enough for practical adoption: gate-setting support, automatic data conversion, and shareable reporting are what make the model usable as a design tool.
Figures & tables
| Stage | Status | Notes / next step |
|---|---|---|
| Design-use approval | Completed | Re-review, Mar. 2025 |
| Transfer to crash-safety group | Completed | 2025 |
| Directed initial use | Under way | Post-test investigation, fracture-risk assessment, controlled-fracture design; counts confidential |
| Routine full-vehicle use | Pending | Next: a track record in the directed scenarios |
| Coverage expansion | Pending | New paired data and retraining for more material grades and gate counts |
Surrogate Modeling
Surrogate modeling builds faster or more interpretable approximations of expensive simulations and black-box models.
See all 256 papers