Continuous Diffusion Language Models

Flow Language Models (FLMs) have emerged as a continuous-state alternative to discrete diffusion language models, yet the role of their continuous representations in reasoning remains unclear. We investigate this question by comparing the reasoning efficiency of FLMs and discrete diffusion models, measured by solution accuracy under matched denoising steps. Unlike discrete diffusion, which passes categorical states between denoising steps, FLMs evolve a continuous sequence representation throughout denoising and decodes it into discrete tokens only at the end. Our theoretical analysis shows, from a superposition perspective, how information retained in these continuous states can benefit reasoning. Intermediate-state interventions provide further empirical support for this theoretical account, showing that removing information about alternative candidates reduces subsequent solution recovery. Together, these findings show that FLMs allow evidence for multiple candidates to persist and inform subsequent reasoning before a discrete answer is produced. Furthermore, our experiments on maze planning and Sudoku tasks show that FLMs achieve greater reasoning efficiency in the few-step regime: FLMs achieves higher sequence accuracy than discrete diffusion baselines at matched model sizes and small denoising steps. On maze planning tasks, FLMs can also achieve comparable accuracy with smaller models. For example, on Maze15, FLM reaches the 95% accuracy target at 64 denoising steps with 36.5% fewer parameters than MDLM. These findings point to continuous state spaces as a promising foundation for reasoning models that require fewer refinement steps.

Diffusion language models (DLMs) generate text through iterative parallel refinement, offering the potential for higher throughput than autoregressive (AR) decoding. However, most DLMs still maintain one generative state per token, so every denoising step processes a state sequence as long as the output sequence, limiting the throughput gains from parallel generation. Continuous DLMs provide an additional degree of freedom: a single continuous state can represent multiple tokens, allowing diffusion to operate on a much shorter latent sequence. We introduce \emph{Branching Latent Diffusion (BLD)}, which exploits this flexibility by compressing a 1024-token sequence into only 64 block latents, a $16\times$ reduction. BLD combines latent compression with \emph{branching token realization}, where each latent is decoded by a local AR branch and all branches run in parallel. Because strong compression makes joint latent generation difficult, BLD generates the latents in groups, conditioning each group on previously generated latents. In end-to-end evaluation on the same GPU, BLD reduces generation FLOPs by more than $80\times$ and increases throughput by more than $6\times$ relative to the similarly sized ELF-L baseline. Compared with the AR baseline, BLD achieves more than $6\times$ higher throughput and more than $4\times$ lower latency. Despite the compression, BLD maintains competitive local fluency and diversity, although long-range coherence remains challenging. Overall, BLD shows that moving diffusion from token-level states to compressed latent sequences can substantially improve the efficiency of long-sequence generation.

We revisit a standard accepted practice in the continuous diffusion language model literature of fixing conditioning prompt tokens clean during training. We make a very simple modification: also noise the conditioning prompt tokens during training. We demonstrate that under this modified training objective, we achieve better generalization in combinatorial reasoning tasks such as Sudoku and N-Queens, with the largest gains on harder variants ($3.73\% \to 24.65\%$ solve rate on Sudoku Hard), and increased diversity of generated solutions ($50.60\% \to 73.79\%$ coverage on 10x10 N-Queens). We also show measurable improvements to natural language generation quality in modest dataset regimes with Gigaword summarization, but notably demonstrate that gains do not transfer to all natural language tasks (e.g open ended dialogue generation). Our method is a single line change to the training objective, requires no additional inference costs by default, and provides the flexibility of classifier-free guidance inspired guided sampling. Our code is publicly available.

Diffusion Language Models (DLMs) hold the promise of order-agnostic, parallel text generation. Recently, continuous diffusion and flow matching models have seen substantial gains, driven by carefully crafted token representations and diffusion/flow spaces. In this work, we introduce Hierarchical Continuous Diffusion Language Models (H-CDLMs), a simple framework that further improves continuous DLMs with minimal compute and parameter overhead. Drawing on the discrete DLM and continuous image diffusion literature on joint diffusion, we diffuse multiple modalities in parallel. These modalities represent tokens at different semantic granularities: in our instantiation, the tokens themselves and coarser clusters obtained by clustering pretrained token embeddings. We propose a general setup that allows per-modality samplers and schedules to enhance the interplay between modalities. Applied to CoBit, this yields H-CoBit, which delivers large empirical gains across benchmarks. At dataset entropy, H-CoBit improves MAUVE and reaches a generative perplexity (GenPPL) of 49.4 on LM1B and 50.4 on OWT, improving on the baseline by 24.2 and 20.7 points and surpassing even discrete DLMs of comparable size. On GSM8K, it reaches 27.4% accuracy, outperforming prior continuous diffusion and flow-based models. We further apply H-CDLM to the flow matching model FLM, obtaining consistent gains with H-FLM and demonstrating that the framework generalizes across continuous generative paradigms. Our code will be made publicly available at https://github.com/matol-16/HCDLM.git .

Discrete diffusion language models offer a compelling alternative to autoregressive generation for tasks demanding bidirectional reasoning and global constraint satisfaction. Yet they share a structural bottleneck: when decoding in parallel, each token is sampled independently from its marginal, severing the statistical dependencies among the tokens decoded together. Continuous diffusion language models avoid this by denoising a shared continuous state, but their denoiser sees only that state, so nothing ties it to a valid token configuration until it is finally decoded. To address this, we propose Hierarchical Continuous Diffusion Language Models (HC-DLM), which couple discrete token generation with a continuous latent trajectory in a single, principled denoising process, whose training objective is derived from a variational bound on the token likelihood. In contrast to recent methods that attach continuous context to a self-contained discrete chain, HC-DLM makes the latent the only persistent generative state: tokens are read out from it at every step and feed back as a scaffold for the next latent update. On structured reasoning (Sudoku), mathematical planning (Countdown) and language modeling (LM1B), HC-DLM improves over discrete and continuous diffusion baselines at matched model size, in puzzle accuracy on Sudoku and Countdown and in generative perplexity on LM1B. Project page: https://hc-dlm.github.io/.

Diffusion language models (DLMs) offer a promising alternative to autoregressive (AR) language generation. Recent advances in continuous DLMs, which apply latent diffusion to continuous text embeddings, raise a practical question: which embedding makes the best latent space, i.e., the most diffusible? To answer this, we search through different embeddings and find that scaling the embedding model to stronger ones within the same family (T5 to T5Gemma-1 to T5Gemma-2) greatly improves generative performance. But the raw T5Gemma-2 embeddings are still not optimal. They are so discriminative that even the embeddings of plausible alternative words are separated, which makes the generation vulnerable to imperfect sampling. Consequently, continuous diffusion often fails to reach any of them and ends up at an invalid embedding instead. To address this, we distill T5Gemma-2 into a student encoder that learns the teacher's decoded probabilities as soft labels. Learning from such soft labels makes the student pull the alternative embeddings closer while maintaining the encoding-decoding mechanism. The distilled embeddings form a more connected and diffusible latent space, improving over the vanilla T5Gemma-2 embeddings. As a result, our medium-sized DLM achieves Gen. PPL 17.8 (against real-text PPL 15.4) at real-text entropy on OpenWebText, outperforming GPT-2-M on Gen. PPL.

Recent works on continuous diffusion for discrete data have demonstrated performance on par with comparable discrete diffusion models. However, these continuous counterparts lack key features that are essential to practical use as language models, namely variable-length generation and support for a key-value cache, and they still lag behind the frontier of autoregressive and discrete diffusion quality. In this work, we address these limitations. We do so by introducing a model parameterization that uses position-dependent noise schedules to define semi-autoregressive (SAR) continuous diffusion language models (DLMs). Together with efficient training and sampling algorithms, we call this framework Clock Diffusion, and we present two special cases of our method: block and sliding window generation. We then define ClockDLMs, a family of Gaussian DLMs based on sliding window Clock Diffusion that attain state-of-the-art diffusion likelihood bounds on OpenWebText, even beating the performant block SAR discrete diffusion models. ClockDLMs trained on TinyGSM also substantially outperform continuous baselines on the GSM8K benchmark and match and exceed comparable SAR discrete diffusion models. Finally, building on our parameterization, we propose more efficient samplers that we dub Cache Grab, which adapt techniques from accelerated inference in discrete diffusion, such as committing tokens whose probabilities exceed a confidence threshold and self-speculative decoding, further improving our models' quality and efficiency.

Continuous diffusion language models generate all tokens in parallel, yet high-quality generation can still require hundreds of network evaluations (NFEs). We study how distributional distillation can reduce this cost by exploiting the student's probabilistic token outputs. Our unified formulation connects the student's output parameterization to the resulting gradient estimators and yields two methods with the same student architecture and reverse-KL matching objective: Simplex-DMD uses continuous token relaxations and pathwise gradients, while Reinforce-DMD uses categorical sampling and REINFORCE with a learned density ratio. We develop both methods for multi-step generation and investigate the training and sampling choices associated with each parameterization. On OpenWebText, for sequences of 1,024 tokens, Simplex-DMD achieves a generative perplexity of 45.6 at a unigram entropy of 5.44 nats in just 4 NFEs, a 49% reduction relative to the strongest evaluated diffusion baseline at matched entropy and sampling budget. Reinforce-DMD improves the frontier at larger budgets, reaching a generative perplexity of 14.9 at an entropy of 5.00 nats with 256 NFEs, a 20% reduction under the same comparison protocol.

Continuous diffusion generates complete reasoning solutions through iterative refinement in latent space. We introduce the Continuous Embedding Diffusion Reasoner (CEDR), an ELF-based training and inference recipe. Our experiments show that accurate decoding alone does not ensure strong reasoning performance. We therefore learn compact representations from multiple layers of a strong autoregressive teacher. Their decomposition also enables asynchronous denoising at different rates. We show that prompt encodings need only preserve the information required for the correct text-conditional score, rather than exactly match teacher features, and use a staged curriculum to learn a compact prompt encoder that replaces the teacher Transformer at inference. We adapt DiffusionNFT to learned self-conditioning guidance and incorporate gold-solution endpoints to supplement sparse rewards. Our supervised models outperform reported results from recent continuous-diffusion baselines at comparable backbone scales on mathematical reasoning and HumanEval code generation. With a 638M-parameter denoising backbone and learned prompt conditioning, post-NFT CEDR-L achieves 63.74% pass@1 on GSM8K and 24.6% on MATH500 at 64 denoising steps, and 32.85% on HumanEval and 30.18% on HumanEval+ at 128 denoising steps. Code will be available at: https://github.com/chengxiang/CEDR.

Most continuous diffusion language models process one latent position per token at each sampling step, making generation expensive. Two-stage methods lower the cost by reducing the latent length, but they fix the compressed embedding space before training the diffusion model. Embeddings from the fixed space can be difficult to model with diffusion and decode reliably into tokens, which limits generation quality after compression. To address this problem, we introduce JPEG-DLM (Joint-embedding Prediction for Efficient Generation with Diffusion Language Model), which jointly trains a compressor, a flow matching model and a decoding module. With joint-embedding prediction, JPEG-DLM learns compressed embeddings that are more structured, easier to model with diffusion and reliably decodable into tokens. JPEG-DLM achieves the lowest mean Gen-PPL and highest throughput among recent diffusion and flow models on LM1B and OWT. At a compression rate of 0.5 on OWT, it reaches a Gen-PPL of 34.52 and approximately 2.3 times ELF's throughput. These results suggest that jointly learning compressed embeddings offers a promising path toward efficient diffusion language modeling. Code will be released soon.

Fully continuous diffusion language models (dLMs) denoise continuous representations without intermediate discretization, then decode all response tokens in parallel at the final step. Their performance on challenging reasoning tasks remains less established than that of autoregressive (AR) LLMs and masked dLMs. We scale Embedded Language Flows (ELF) to mathematical reasoning and code generation on GSM8K, MATH-500, HumanEval, and MBPP. We introduce ELF-REG, which improves learning with representation alignment and entanglement (REPA+REG), where a frozen AR teacher supervises intermediate denoiser features and supplies a global representation that is jointly denoised with the response. ELF-REG-L achieves 55.96% pass@1 on GSM8K at 64 network function evaluations (NFE), and 13.39% on MATH-500 and 22.56% on HumanEval at 128 NFE. It outperforms the evaluated comparable-scale dLMs in pass@1 on GSM8K and code, and improves MATH-500 pass@1 from 10.55% for the ELF-L baseline to 13.39% with ELF-REG-L. Without few-step training, the same task-specific checkpoints support strong low-NFE performance through early-stop, which decodes an intermediate clean prediction without completing the denoising trajectory. At 16 NFE, ELF-REG-L reaches 41.21% HumanEval pass@10, outperforming recent continuous dLMs of comparable scale.

A popular selling point of diffusion large language models (dLLMs) is their capacity for parallelism: the ability to generate sequences of text far more efficiently than autoregressive models, which require one forward pass per token. Yet among the many competing paradigms for dLLMs, from masked to uniform to Gaussian diffusion, principled understanding of how these different proposals compare in parallelism remains limited. In this work, we initiate a fine-grained comparison of the capacity for parallelism among these three leading approaches and prove the following: - Uniform and Gaussian diffusion can sample in a number of forward passes which scales with the dual total correlation of the underlying distribution, a measure of intrinsic complexity which can be much smaller than the context length. Previously, it was only known how to achieve this using masked diffusion. - For a certain family of random empirical measures, we show that $\widetildeΘ(\sqrt{d})$ forward passes are necessary and sufficient to sample using uniform or Gaussian diffusion, yet there exist approximate score oracles for which $\widetildeΩ(d)$ forward passes are needed for masked diffusion. This establishes the first provable separation in parallelism between the three prevailing dLLM paradigms. Contrary to popular intuition that masked diffusions are harder to parallelize because they must commit to token values, the latter separation instead comes from the fact that the critical windows in masked diffusion sampling are asymptotically narrower than those in uniform and Gaussian diffusion sampling.

We introduce a new method to guide flow matching models. Our approach, which we call probe guidance, uses the frozen internal states of an existing diffusion model to construct a guidance signal. This works using a similar principle as autoguidance, but eliminates the need for an additional forward pass at inference time and provides a reliable path to ensure that the weak and strong model share similar dynamics. We apply and benchmark this method on continuous diffusion language models, where probe guidance sets a new state-of-the-art performance on unconditional generation. When applied to a 1.7B diffusion language model, probe guidance consistently improves on multiple choice question answering benchmarks. Using our probes, we study the traditional autoguidance setting where the strong model is a weak checkpoint, and find that the weak model must come from a low-entropy region of training. These findings both provide a practical way to improve diffusion language models and shed light on the actual mechanism behind autoguidance, which is currently poorly understood.

Language remains an outlier in generative modeling: while images, video, and audio are increasingly modeled in continuous latent spaces, text generation still relies predominantly on discrete tokens. Existing continuous language models either inherit embedding spaces not designed for joint generation and decoding, or compress autoencoded latents to ease diffusion, sacrificing token-level fidelity. Instead of simplifying the representation to suit the generative model, we preserve a high-capacity, decodable text latent and design the diffusion model to learn its distribution directly. We introduce AURORA-LM, a continuous-latent diffusion language model that separates the construction of a decodable text representation from the modeling of its distribution. A Query-based Encoder-Decoder organizes text into a high-capacity, prefix-aligned latent sequence, and a Block-causal Diffusion Transformer learns its distribution through flow matching, generating blocks left to right while denoising positions within each block in parallel. Because such a latent is harder for diffusion to model, AURORA-LM restricts only the noisy-input pathway while retaining the full clean-latent prediction target, accommodating full-width latents without reducing decoder-facing capacity. We further calibrate the noise-level distribution to the latent width, and introduce self-trajectory consistency to bridge independently sampled training noise and iterative denoising at inference. AURORA-LM achieves the strongest performance among evaluated continuous and diffusion-based language models on OpenWebText free generation and XSum summarization. Scaling to 1B parameters with about 1500 EFLOPs of total compute yields further gains, surpassing a larger publicly released latent-diffusion language model under a matched evaluation protocol. All experiments are conducted on Ascend NPUs.

We introduce Nemotron-Labs-Diffusion, a tri-mode language model (LM) that unifies AR, diffusion, and self-speculation decoding within a single architecture. Trained with a joint AR-diffusion objective, Nemotron-Labs-Diffusion can switch modes to sustain high throughput across deployment settings and concurrency levels. Our study shows that (1) AR and diffusion objectives are complementary: diffusion improves lookahead planning, while AR provides left-to-right linguistic priors. (2) In self-speculation mode, diffusion drafts while AR verifies, outperforming multi-token prediction (MTP) methods in both acceptance rate and real-device efficiency. (3) A speed-of-light analysis further demonstrates diffusion's long-term potential, with up to 76.5% more tokens per forward pass than self-speculation under an optimal sampler. Scaling to 3B, 8B, and 14B parameters, our Nemotron-Labs-Diffusion family, including base, instruct, and vision-language models, consistently outperforms state-of-the-art open-source AR and diffusion LMs in both accuracy and speed. For example, Nemotron-Labs-Diffusion-8B decodes 6x more tokens per forward than Qwen3-8B with comparable accuracy, translating to 4x higher throughput on SPEED-Bench with SGLang on a GB200 GPU.

Continuous diffusion language models such as ELF report record-low generative perplexity (Gen-PPL). We find a catch: these models repeat far more than human text, and Gen-PPL rewards rather than penalizes that repetition, so its low scores overstate quality. Strip the repetition and ELF-B's Gen-PPL rises from $19.5$ to $27.7$; the smallest model even posts the best Gen-PPL because it repeats most. We trace the repetition to its source: a contractive attractor along a \emph{single direction} in the self-conditioning feedback loop, the loop that feeds each step's clean estimate into the next. Because the failure is one-dimensional, a one-dimensional fix suffices, and we propose one. \textbf{ACE} (Attractor-Contrast-Escape) subtracts that single, label-free direction from the feedback at each step. Estimated once on the $105$M model, the direction cuts repetition to near the human level while keeping quality competitive, and transfers near-unchanged to the $342$M and $652$M models and across samplers; the same recipe recovers useful directions on other architectures. Since Gen-PPL itself rewards repetition, we instead measure the compute each fix needs to produce human-clean text, where ACE is $1.5$--$5\times$ cheaper.

Gaussian-corrupted sentence embeddings have no direct linguistic interpretation, yet continuous diffusion language models can generate fluent text from them. We study this puzzle through Embedded Language Flows (ELF) and identify a decoder-basin mechanism: our evidence suggests that denoising becomes reliable when trajectories reach regions where the native decoder can read stable tokens. We introduce a diagnostic protocol for denoisability, semantic recoverability, order sensitivity, decoder compatibility, and trajectory reliability. It exposes failures hidden by scalar metrics: low mean-squared error can discard linguistic content, low perplexity can reflect low-entropy collapse, and clean latent reconstruction can coexist with a narrow decoder basin. A decoder-margin bound explains why token recovery depends on margin and local decoder sensitivity, not latent error alone. Auditing public ELF checkpoints reveals an interface phase diagram: early predictions are weakly readable, mid-trajectory disagreement marks a competition region, and late predictions enter a high-margin decoder basin. Once inside, token realization is surprisingly simple on generated ELF states: frozen T5 (Text-to-Text Transfer Transformer) token-embedding lookup recovers $93$--$96\%$ of native decoder decisions, and a single linear readout reaches $97.9\%$ agreement at 32k samples, leaving an $\approx1.1$--$1.2$ perplexity gap in a structured residual tail. Under conservative held-out gates, a margin rule exits roughly $17$--$28\%$ earlier in denoising steps under an explicit diagnostic monitor. Boundary checks on LangFlow, BitstreamDiffusion, and the Continuous Latent Diffusion Language Model (Cola-DLM) show that the same interface questions remain meaningful when the state object and decoder change. Continuous and latent diffusion language models should therefore be evaluated as representation-decoder systems.

Discrete Masked diffusion language models generate text by iterative parallel decoding, but few-step decoding suffers from a tradeoff between length and quality: with a fixed step budget, standard methods can generate a short, high-quality output, or they can produce long but repetitive text. Continuous denoising can sidestep this tradeoff by evolving all positions jointly in embedding space, but building such a model from scratch at scale remains an open problem. We show that a pretrained masked DLM can instead be lightly adapted to support continuous embedding-space denoising. Starting from LLaDA-8B-Instruct, we continue-pretrain for only 1,000 steps with Discrete Stochastic Localization (DSL), replacing binary masking with continuous per-token Gaussian noise as a soft mask. The adapted model supports continuous inference that evolves all positions jointly in embedding space and defers hard token commitment to the final step. On zero-shot summarization at low step budgets (<=16 forward passes), DSL-LLaDA-SDE achieves the best ROUGE-1 on all four benchmarks and largely avoids the premature-termination / repetition tradeoff of iterative unmasking. The same adaptation also yields selective noisy-state robustness: the model corrects corrupted tokens while preserving clean ones. Control experiments using standard masked diffusion training with the same compute demonstrate neither behavior.

Diffusion language models intrinsically fail to capture correlations between decoded tokens, which leads to a harsh trade-off between sampling quality and throughput. To solve this issue, we propose DiLaDiff, a variant of masked diffusion language models with three components: (1) a continuous latent space with semantic capabilities, learned by an auto-encoder fine-tuned from an existing masked diffusion language model; (2) a latent diffusion model learning the prior over the encoder distribution; (3) a consistency model distilling the learned prior into a few-step latent generative model. We show that, even without distillation, our latent-guided diffusion model outperforms the masked diffusion baseline while significantly accelerating inference. Consistency distillation further lowers the computational overhead of continuous diffusion, such that the latent is generated in negligible time compared to discrete decoding.

While diffusion has drawn considerable recent attention from the language modeling community, continuous diffusion has appeared less scalable than discrete approaches. To challenge this belief we revisit Plaid, a likelihood-based continuous diffusion language model (DLM), and construct RePlaid by aligning the architecture of Plaid with modern discrete DLMs. In this unified setting, we establish the first scaling law for continuous DLMs that rivals discrete DLMs: RePlaid exhibits a compute gap of only $20\times$ compared to autoregressive models, outperforms Duo while using fewer parameters, and outperforms MDLM in the over-trained regime. We benchmark RePlaid against recent continuous DLMs: on OpenWebText, RePlaid achieves a new state-of-the-art PPL bound of $22.1$ among continuous DLMs and superior generation quality. These results suggest that continuous diffusion, when trained via likelihood, is a highly competitive and scalable alternative to discrete DLMs. Moreover, we offer theoretical insights to understand the advantage of likelihood-based training. We show that optimizing the noise schedule to minimize the ELBO's variance naturally yields linear cross-entropy (information loss) over time. This evenly distributes denoising difficulty without any case-specific time reparameterization. In addition, we find that optimizing embeddings via likelihood creates structured geometries and drives the most significant likelihood gain.

Continuous diffusion language models require choosing a representation space in which denoising operates, yet it remains unclear which representations are most compatible with diffusion. We study a basic design question: where inside a pretrained language model should continuous diffusion operate? We formulate this as a hidden-state interface-selection problem and hypothesize that diffusion-friendly interfaces can be identified from representation geometry. We operationalize this hypothesis using three training-free geometric proxies: local compactness, global stiffness, and effective rank. Across two 8B-scale backbones, the resulting geometry score predicts fixed-budget diffusion bridgeability beyond the dominant effect of layer depth. We then instantiate DiHAL, a Locate-and-Replace framework that replaces the transformer prefix below a selected interface with conditional diffusion while retaining the pretrained suffix and LM head. Under full training, geometry-selected interfaces remain close to validation-loss oracles and outperform worst-layer controls, while the diffusion bridge outperforms a parameter-matched deterministic replacement under matched diagnostic conditions. These results suggest that the representation space in which diffusion operates should itself be treated as a first-class design variable for continuous diffusion in language models.

Diffusion and flow-based models have become the de facto approaches for generating continuous data, e.g., in domains such as images and videos. Their success has attracted growing interest in applying them to language modeling. Unlike their image-domain counterparts, today's leading diffusion language models (DLMs) primarily operate over discrete tokens. In this paper, we show that continuous DLMs can be made effective with minimal adaptation to the discrete domain. We propose Embedded Language Flows (ELF), a class of diffusion models in continuous embedding space based on continuous-time Flow Matching. Unlike existing DLMs, ELF predominantly stays within the continuous embedding space until the final time step, where it maps to discrete tokens using a shared-weight network. This formulation makes it straightforward to adapt established techniques from image-domain diffusion models, e.g., classifier-free guidance (CFG). Experiments show that ELF substantially outperforms leading discrete and continuous DLMs, achieving better generation quality with fewer sampling steps. These results suggest that ELF offers a promising path toward effective continuous DLMs.

Latent diffusion models offer an attractive alternative to discrete diffusion for non-autoregressive text generation by operating on continuous text representations and denoising entire sequences in parallel. The major challenge in latent diffusion modeling is constructing a suitable latent space. In this work, we present the Latent Diffusion Language Model (LDLM), in which the latent encoder, diffusion model, and decoder are trained jointly. LDLM builds its latent space by reshaping the representations of a pre-trained language model with a trainable encoder, yielding latents that are easy to both denoise and decode into tokens. We show that naive joint training produces a low-quality diffusion model, and propose a simple training recipe consisting of an MSE decoder loss, diffusion-to-encoder warmup, adaptive timestep sampling, and decoder-input noise. Ablations show that each component substantially impacts generation performance. On OpenWebText and LM1B, LDLM achieves better generation performance than existing discrete and continuous diffusion language models while being $2{\text -}13\times$ faster, indicating that jointly learning the latent space is a key step toward making latent diffusion competitive for text generation.

Continuous diffusion and flow matching models could represent a powerful alternative to autoregressive approaches for language modelling (LM), as they unlock a host of advantages currently reserved for continuous modalities, including accelerated sampling and tilting. Recently, several works have demonstrated the possibility of generating discrete data continuously by a simple flow matching process between a Gaussian and the one-hot encoded data distribution. They have further shown the feasibility of accelerated sampling via Categorical Flow Maps (CFMs), resulting in competitive sample quality in the few-step regime. However, this method had only been evaluated at relatively modest scales ($<1$B), leaving the question of its scalability completely open. In this article, we train a $1.7$B-parameter base flow model on $2.1$T tokens and self-distill it into a CFM that generates diverse, high-quality text in as few as $4$ inference steps while maintaining near-data-level token entropy. Furthermore, we introduce a likelihood bound for CFMs in the semi-discrete setting, and show that they can be used to score the model on standard LM benchmarks, achieving results in the same range as discrete diffusion methods. Finally, we uncover some of the challenges that arise from training these models at scale, and we provide prescriptive insights on loss weighting and time scheduling.

Diffusion Transformers (DiT) trained with flow matching in a VAE latent space have unified visual generation across images and videos. A natural next step toward a single architecture for both generation (visual synthesis) and understanding (text generation) is to apply this framework to language modeling. We propose TextLDM, which transfers the visual latent diffusion recipe to text generation with minimal architectural modification. A Transformer-based VAE maps discrete tokens to continuous latents, enhanced by Representation Alignment (REPA) with a frozen pretrained language model to produce representations effective for conditional denoising. A standard DiT then performs flow matching in this latent space, identical in architecture to its visual counterpart. The central challenge we address is obtaining high-quality continuous text representations: we find that reconstruction fidelity alone is insufficient, and that aligning latent features with a pretrained language model via REPA is critical for downstream generation quality. Trained from scratch on OpenWebText2, TextLDM substantially outperforms prior diffusion language models and matches GPT-2 under the same settings. Our results establish that the visual DiT recipe transfers effectively to language, taking a concrete step toward unified diffusion architectures for multimodal generation and understanding.

Diffusion language models (DLMs) promise parallel, order-agnostic generation, but on standard benchmarks they have historically lagged behind autoregressive models in sample quality and diversity. Recent continuous flow and diffusion approaches have narrowed this gap. In this work, we further close the autoregressive gap by modeling text as a continuous diffusion process over fixed-width binary bitstreams. We refer to the resulting model as CoBit (Continuous Bitstream Diffusion). Our approach represents semantic tokens as analog bit sequences and uses a matched-filter residual parameterization to isolate contextual learning from analytic independent-bit posteriors. Crucially, we adopt a stochastic sampler that applies Langevin-type corrections gated by the entropy-rate profile, concentrating stochasticity in high-information regions while remaining nearly deterministic elsewhere. On LM1B, our 130M-parameter model reaches a generative perplexity (GenPPL) of 59.76 at matched real-data entropy (4.31) using 256 neural function evaluations (NFEs), outperforming prior DLM baselines and reaching the autoregressive reference. On OpenWebText (OWT), our sampler establishes a new continuous-DLM Pareto frontier, achieving GenPPL 27.06 at entropy 5.26 using 4x fewer steps than previous 1024-NFE baselines. Scaling the same recipe to a 462M-parameter model (CoBit-M) further improves the OWT GenPPL-entropy frontier over the 130M model (CoBit-S) and over medium-scale continuous and discrete DLM baselines, reaching GenPPL 19.5 at entropy 5.40, near real-data entropy (5.44), and approaching pretrained GPT-2 Medium over the high-quality region. As an additional benefit, bitstream diffusion removes the O(V) vocabulary scaling bottleneck of standard DLMs: by predicting O(log V) bitwise logits via semantic bit-patching, it lowers memory and raises throughput, a scalable paradigm as vocabulary sizes grow.

Large language models have achieved remarkable success under the autoregressive paradigm, yet high-quality text generation need not be tied to a fixed left-to-right order. Existing alternatives still struggle to jointly achieve generation efficiency, scalable representation learning, and effective global semantic modeling. We propose Cola DLM, a hierarchical latent diffusion language model that frames text generation through hierarchical information decomposition. Cola DLM first learns a stable text-to-latent mapping with a Text VAE, then models a global semantic prior in continuous latent space with a block-causal DiT, and finally generates text through conditional decoding. From a unified Markov-path perspective, its diffusion process performs latent prior transport rather than token-level observation recovery, thereby separating global semantic organization from local textual realization. This design yields a more flexible non-autoregressive inductive bias, supports semantic compression and prior fitting in continuous space, and naturally extends to other continuous modalities. Through experiments spanning 4 research questions, 8 benchmarks, strictly matched ~2B-parameter autoregressive and LLaDA baselines, and scaling curves up to about 2000 EFLOPs, we identify an effective overall configuration of Cola DLM and verify its strong scaling behavior for text generation. Taken together, the results establish hierarchical continuous latent prior modeling as a principled alternative to strictly token-level language modeling, where generation quality and scaling behavior may better reflect model capability than likelihood, while also suggesting a concrete path toward unified modeling across discrete text and continuous modalities.

Speech-only spoken language models (SLMs) lag behind text and text-speech models in performance, with recent discrete autoregressive (AR) SLMs indicating significant computational and data demands to match text models. Since discretizing continuous speech for AR creates bottlenecks, we explore whether continuous diffusion (CD) SLM is more viable. To quantify the SLMs linguistic quality, we introduce the phoneme Jensen-Shannon divergence (pJSD) metric. Our analysis reveals CD SLMs, mirroring AR behavior, exhibit scaling laws for validation loss and pJSD, and show optimal token-to-parameter ratios decreasing as compute scales. However, for the latter, loss becomes insensitive to choice of data and model sizes, showing potential for fast inference. Scaling CD SLMs to 16B parameters with tens of millions of hours of conversational data enables generation of emotive, prosodic, multi-speaker, multilingual speech, though achieving long-form coherence remains a significant challenge.

Language generation is almost universally treated as a sequential process: autoregressive models emit one token at a time, while diffusion language models replace token-level seriality with a long trajectory of iterative refinement. In this work, we introduce PlaidQ, a 0.7B continuous diffusion language model for code generation, and show that its trajectory can be aggressively distilled into only a few denoising steps---or even one, enabling efficient code generation. PlaidQ repurposes a pretrained autoregressive model as a bidirectional denoiser over continuous token embeddings. We distill PlaidQ with distribution matching for few-step generation and paired-trajectory supervision for one-step generation. At matched model scale, PlaidQ is competitive with discrete diffusion language models on code generation. Distillation then shifts the quality--compute frontier: a 16-step student reaches 31.78 and 40.49 pass@10 on HumanEval and MBPP+, surpassing the same PlaidQ teacher sampled for 512 steps. At the extreme, paired-trajectory distillation achieves 7.07 pass@1 on HumanEval with a single denoising step, producing functionally correct programs. Together, these results establish continuous diffusion as a viable path to few-step and one-step code generation. Broadly, continuous diffusion is not merely another representation for language: it provides an interface through which language models can inherit the acceleration and distillation machinery of continuous diffusion modeling. Training and inference code and model checkpoints are available at https://github.com/pengzhangzhi/plaidq.