Event-Based Object Detection

Detecting fast-moving objects, such as unmanned aerial vehicle (UAV), from event camera data is challenging due to the sparse, asynchronous nature of the input. Traditional Discrete Fourier Transforms (DFT) are effective at identifying periodic signals, such as spinning rotors, but they assume uniformly sampled data, which event cameras do not provide. We propose a novel per-pixel temporal analysis framework using the Non-uniform Discrete Fourier Transform (NDFT), which we call Drone Detection via Harmonic Fingerprinting (DDHF). Our method uses purely analytical techniques that identify the frequency signature of drone rotors, as characterized by frequency combs in their power spectra, enabling a tunable and generalizable algorithm that achieves accurate real-time localization of UAV. We compare against a YOLO detector under equivalent conditions, demonstrating improvement in accuracy and latency across a difficult array of drone speeds, distances, and scenarios. DDHF achieves an average localization F1 score of 90.89% and average latency of 2.39ms per frame, while YOLO achieves an F1 score of 66.74% and requires 12.40ms per frame. Through utilization of purely analytic techniques, DDHF is quickly tuned on small data, easily interpretable, and achieves competitive accuracies and latencies to deep learning alternatives.

The rapid proliferation of drones requires balancing innovation with regulation. To address security and privacy concerns, techniques for drone detection have attracted significant attention.Passive solutions, such as frame camera-based systems, offer versatility and energy efficiency under typical conditions but are fundamentally constrained by their operational principles in scenarios involving fast-moving targets or adverse illumination.Inspired by biological vision, event cameras asynchronously detect per-pixel brightness changes, offering high dynamic range and microsecond-level responsiveness that make them uniquely suited for drone detection in conditions beyond the reach of conventional frame-based cameras.However, the design of most existing event-based solutions assumes a static camera, greatly limiting their applicability to moving carriers--such as quadrupedal robots or unmanned ground vehicles--during field operations.In this paper, we introduce a real-time drone detection system designed for deployment on moving carriers. The system utilizes a spinning event-based camera, providing a 360° horizontal field of view and enabling bearing estimation of detected drones. A key contribution is a novel image-like event representation that operates without motion compensation, coupled with a lightweight neural network architecture for efficient spatiotemporal learning. Implemented on an onboard Jetson Orin NX, the system can operate in real time. Outdoor experimental results validate reliable detection with a mean angular error below 2° under challenging conditions, underscoring its suitability for real-world surveillance applications. We will open-source our complete pipeline to support future research.

Event cameras provide sequential visual data with spatial sparsity and high temporal resolution, making them attractive for low-latency object detection. Existing asynchronous event-based neural networks exploit this low-latency advantage by updating predictions event by event, but still suffer from two bottlenecks: recurrent architectures are difficult to train efficiently on long sequences, and improving accuracy often increases per-event computation and latency. Linear attention is appealing because it enables parallel training and recurrent inference. However, its dense state updates make per-event computation scale with the state size, yielding a poor accuracy-efficiency trade-off for object detection, where accurate localization requires fine-grained spatial states. The key challenge is therefore to introduce sparse state activation that exploits the spatial sparsity of events while preserving efficient parallel training. We propose Spatially-Sparse Linear Attention (SSLA), which introduces a mixture-of-spaces state decomposition and a scatter-compute-gather training procedure, enabling state-level sparsity as well as training parallelism. Building on SSLA, we develop an end-to-end asynchronous linear attention model, SSLA-Det, for low-latency event-based object detection. On Gen1 and N-Caltech101, SSLA-Det achieves state-of-the-art accuracy among asynchronous methods, reaching 0.375 mAP and 0.515 mAP, respectively, while reducing per-event computation by over 20 times compared with the strongest prior asynchronous baseline, demonstrating the potential of linear attention for low-latency event-based vision.

Bio-inspired event cameras have recently attracted significant research due to their asynchronous and low-latency capabilities. These features provide a high dynamic range and significantly reduce motion blur. However, because of the novelty in the nature of their output signals, there is a gap in the variability of available data and a lack of extensive analysis of the parameters characterizing their signals. This paper addresses these issues by providing readers with an in-depth understanding of how intrinsic parameters affect the performance of a model trained on event data, specifically for object detection. We also use our findings to expand the capabilities of the downstream model towards sensor-agnostic robustness.

Event cameras record luminance changes with microsecond resolution, but converting their sparse, asynchronous output into dense tensors that neural networks can exploit remains a core challenge. Conventional histograms or globally-decayed time-surface representations apply fixed temporal parameters across the entire image plane, which in practice creates a trade-off between preserving spatial structure during still periods and retaining sharp edges during rapid motion. We introduce Locally Adaptive Decay Surfaces (LADS), a family of event representations in which the temporal decay at each location is modulated according to local signal dynamics. Three strategies are explored, based on event rate, Laplacian-of-Gaussian response, and high-frequency spectral energy. These adaptive schemes preserve detail in quiescent regions while reducing blur in regions of dense activity. Extensive experiments on the public data show that LADS consistently improves both face detection and facial landmark accuracy compared to standard non-adaptive representations. At 30 Hz, LADS achieves higher detection accuracy and lower landmark error than either baseline, and at 240 Hz it mitigates the accuracy decline typically observed at higher frequencies, sustaining 2.44 % normalized mean error for landmarks and 0.966 mAP50 in face detection. These high-frequency results even surpass the accuracy reported in prior works operating at 30 Hz, setting new benchmarks for event-based face analysis. Moreover, by preserving spatial structure at the representation stage, LADS supports the use of much lighter network architectures while still retaining real-time performance. These results highlight the importance of context-aware temporal integration for neuromorphic vision and point toward real-time, high-frequency human-computer interaction systems that exploit the unique advantages of event cameras.

Pedestrian detection in conventional frame-based imaging often suffers from limited temporal responsiveness and substantial data redundancy. Inspired by the biological retina, event-based vision sensing (EVS) offers ultra-low latency, high temporal resolution, wide dynamic range, and low power consumption, making it highly attractive for pedestrian perception in complex environments. This paper provides a comprehensive review of EVS and its application to pedestrian detection in intelligent transportation and surveillance scenarios. We first summarize the sensing principles, historical development, and key advantages of event-based vision in comparison with conventional frame-based imaging. We then review the major methodological components of event-based pedestrian detection, including sensing inputs, event representations, preprocessing strategies, feature extraction, detection models, datasets, and evaluation metrics. In addition, representative methods are comparatively analyzed in terms of temporal fidelity, detection accuracy, computational efficiency, and deployment complexity. Finally, we discuss the major open challenges in current EB-PD research, including benchmark standardization, event-native model design, multimodal fusion, and real-world deployment, and outline several promising directions for future development. This review aims to provide a structured and up-to-date reference for researchers working on event-based pedestrian perception and related intelligent vision systems.