Heart Rate

Background. Remote photoplethysmography estimates the cardiovascular pulse from facial video, and its explanations have rested on inspecting heatmaps rather than on quantitative evidence about where a model reads it. We quantified the explanations and asked whether such explanations transfer between datasets and track model performance. Method. We trained eight condition-specific RhythmFormer models on NCKU-rPPG, recorded under three illumination levels, speaking, rotation, and cycling, estimated one heart rate per 5.12-second clip, and set them beside a UBFC-rPPG reproduction. Raw attention, rollout, attention flow, and Beyond Intuition were assessed by skin coverage and the Salience-guided Faithfulness Coefficient (SaCo). Results. Beyond Intuition ranked highest on both datasets, at median coverage 0.789 and SaCo 0.837 on Static level 3 against 0.826 and 0.917 on UBFC-rPPG; lower ranks differed. Within one participant of one condition, neither measure was related to a clip's heart-rate error, waveform correlation, or signal-to-noise ratio on either dataset: 186 of the 252 coefficients fell below $|ρ|=0.10$ and 28 reached $p<0.05$ against the 13 expected by chance. Across the eight scenarios only Beyond Intuition's coverage followed the three performance measures, at $ρ=-0.43$, $+0.57$, and $+0.43$, while the attention-only methods' SaCo ran opposite to each. It failed at 40 lux alone, its median coverage falling to 0.180 and its median SaCo to $-0.178$, whereas motion degraded the estimates far more without such a drop. Conclusions. Skin coverage and SaCo carry information complementary to the performance measures rather than a proxy for them: attributing to the skin does not guarantee an accurate estimate. What an attribution reveals about a condition is where the model looks rather than how faithfully its map is ordered.

Massage therapy is helpful for the rehabilitation of various diseases, such as headaches caused by migraines and stress. Existing robotic systems have focused on massage therapy on the torso and limbs, but performing massage motions through suitable actuation on a person's head has been a challenge. In this paper, we present MiBOT, a head-worn massage robot that actuates two soft tactors to produce touch motions mimicking human massage. A key design principle behind MiBOT is its silent actuation, which we achieve through pneumatic artificial muscles in conjunction with a controller loop to respond to contact pressure. We evaluated the effectiveness of MiBOT in a controlled study and assessed subjects' blood pressure and heart rate levels while applying MiBOT. We found that our mechanical system generated positive and conclusive quantitative outcomes that are similar to the human-administered massage, decreasing participants' mean systolic and diastolic blood pressure by 2.8 mmHg and 1.7 mmHg, respectively, as well as calming their heart rate by 8-10% on average.

Ubiquitous companion robots offer a promising avenue for immediate anxiety relief in children, yet their effectiveness relies on the ability to monitor physiological states continuously and unobtrusively. Current solutions often depend on external wearables, which impose usability barriers and limit the robot's autonomy. This paper investigates the integration of an embedded photoplethysmography (PPG) sensor directly into a pocket-sized companion robot, AffectaPocket, to enable self-contained heart rate monitoring during tactile interaction. We address the significant challenge of motion artifacts inherent in handheld usage by implementing a two-stage filtering pipeline that utilizes an onboard Inertial Measurement Unit (IMU) to reject high-variance segments and a confidence-based smoothing algorithm for recovery periods. We evaluated the system against a commonly used wrist worn sensor in a Within-Subjects Study with 26 participants. Our results demonstrate that the filtering strategy significantly reduced the Mean Absolute Percentage Error and achieved statistical equivalence to the ground truth measurements (p<0.05). Analysis of short-duration interactions shows that the sensor requires stability over longer periods to converge.

Commercial wearable devices continuously capture rich physiological data (e.g., heart rate, respiration), opening new possibilities for monitoring health conditions, notably around stress. Despite their promise, turning raw wearable physiological data streams into visualizations that surface stress-related insights in daily activities, and that ultimately foster reflection, awareness, and better stress management, remains a significant challenge. The data are noisy and context-dependent: the same spike in heart rate can come from sprinting, a tense presentation, or laughing with friends. To address these challenges, we propose a framework that combines user annotations with wearable data to support better stress management. We introduce a web framework offering interactive visualizations that layer daily activities, stress events, and interventions onto raw physiological streams, enabling users to reflect and identify trends. In a four-week pilot with seven university graduate and undergraduate student participants who logged 269 events, our tool revealed patterns between different types of interventions and stress: social interaction reduced average heart rate by 4.35 to 5.0 beats per minute, deliberate rest reduced average Garmin stress scores by 10.03 to 13.83 points, and mindfulness activities decreased average HRV by 6.61 to 13.22 milliseconds.

Remote photoplethysmography (rPPG) enables non-contact heart-rate estimation from facial videos, but its weak physiological signal is easily corrupted by motion, illumination changes, occlusion, skin-appearance variation, and device noise. Existing rPPG methods typically rely on a single model to directly predict heart rate or recover pulse waveforms, while different strong estimators may produce conflicting yet individually plausible candidates for the same video. To resolve these conflicts, we propose PhysAgent, an inference-time multi-agent candidate-verification framework. Unlike direct prediction approaches, PhysAgent neither trains a new base rPPG model nor asks Multimodal Large Language Models (MLLMs) to output heart rate directly. In contrast, it treats outputs from multiple base estimators as physiological hypotheses to be verified and uses a lightweight 4B MLLM, Qwen3-VL-4B, to drive multi-agent reasoning over video conditions, signal reliability, and candidate disagreement. A deterministic physiological verifier checks the fusion proposal, and a reproducible numerical fusion process produces the final heart rate. Experimental results on multiple public rPPG benchmarks show that PhysAgent improves fusion stability and reliability across different datasets and source-domain settings, while avoiding the irreproducibility and physiological inconsistency of direct MLLM prediction or unconstrained ensemble fusion. The code will be released soon.

In this paper, we propose the MAEConformer, a novel self-supervised learning framework that combines the Conformer architecture with the Masked Autoencoder (MAE) paradigm for large-scale representation learning from unlabelled electroencephalography (EEG) and heart rate variability (HRV) signals. By integrating convolutional operations with Transformer-based self-attention, MAEConformer effectively captures both local temporal patterns and long-range contextual dependencies in physiological time series. To enhance reconstruction fidelity and representation quality, a multi-resolution short-time Fourier transform (MR-STFT) loss is incorporated alongside the reconstruction objective, enabling the model to jointly learn temporal and spectral characteristics across multiple scales. Modality-specific EEG and HRV MAEConformer models were pretrained on 6,030h and 4,868h of unlabelled recordings, respectively, and subsequently transferred to expert-annotated downstream tasks. Experimental results demonstrate that the learned representations provide strong transferability and data efficiency. In EEG-based hypoxic ischemic encephalopathy (HIE) severity classification, the pretrained MAE-EEG model achieved test AUCs of 97.19% and 96.56% for binary and four-class classification tasks, respectively, outperforming a range of state-of-the-art supervised and self-supervised baselines. On the HRV-based HIE severity classification task, MAE-HRV achieved a test AUC of 82.42%, surpassing both self-supervised Transformer-based and supervised convolutional baselines. These findings demonstrate the effectiveness of MAEConformer for learning robust and transferable representations across multiple physiological modalities.

Short-term Heart Rate Variability (HRV) forecasting could provide clinicians with actionable lead time for detecting autonomic dysfunction and adverse cardiac events. Consumer wearable devices generate fragmented, artifact-rich HRV signals that challenge conventional forecasting approaches. In this study, we evaluated the forecasting ability of three Time Series Foundation Models (TSFMs), TimesFM, Chronos, and MOIRAI, against traditional baselines (Mean, Exponential Smoothing, and Exponentially Weighted Moving Average) on real-world wearable data collected from 49 healthy individuals. To address data fragmentation, we introduce a variability-preserving imputation method that augments linear interpolation with locally adaptive stochastic noise, retaining physiological dynamics essential for accurate forecasting. The results show that TSFMs outperformed all baselines without fine-tuning, achieving average Mean Absolute Scaled Error (MASE) between 0.81 and 0.87 across TSFMs and both context lengths (32 and 64 time steps), with Chronos and TimesFM as the top models, though MOIRAI showed limited gains over baselines. With up to a 2-hour forecast horizon, the results establish a baseline for TSFMs' performance on a real-world dataset, highlighting domain-specific fine-tuning as a promising direction for clinical deployment.

Heart rate measurement is one of the key requirements for real-time health monitoring, in particular for health caring of elderly people. Traditional heart rate measurement relies on contact sensing mechanisms such as some heart rate measurement devices at medical hospitals or some wearable devices with embedded sensors such as Apple Watch, etc. In this paper, we develop a system for non-contact, real-time, heart rate measurement using image processing with commodity cameras such as an embedded camera on a laptop, where we use an innovative algorithm to capture the relevant signals for the computation of heart rate in a time series in real life environments. The presented heart rate computation (HRC) process is composed with four major steps: (a) identify frames per second of the camera in use, i.e., 30 frames per second for a given camera, (b) face detection (FD) with shape predictor of 68 face landmarks using deep learning (DL) method, (c) time sliding window (TSW) algorithm to de-noise the signal by smoothing out the noise, and (d) compute heart rate based on identified signal periodicity. We test and analyze the developed prototypes against heart rate results by Apple Watch and check the difference range in multiple rounds and compute the mean of the difference for the measurement values of the heart rate of the same person at the same time. We will do further tuning and optimization of the present methods and deploy the system as a personal AI agent [6] for health monitoring as our future directions.

Heart Rate Variability (HRV) analysis is a key indicator of cardiac physiological state and aids in disease diagnosis. However, research on HRV parameters in healthy individuals remains limited, and no gold standard exists. This study evaluates HRV indices in 40 healthy adults (20 men, 20 women, aged 30-50) to improve HRV's clinical utility. Using computational methods for signal processing and data analysis, time, frequency, and nonlinear indices were analyzed to address five questions: (1) normality, (2) stability, (3) correlation, (4) reproducibility, and (5) consistency. Key findings: (1) Time-domain and nonlinear indices, particularly global and LF (low frequency), follow normal distributions, with gender differences noted. (2) Most indices are stable except HF (high frequency)-related ones. (3) High correlations in HF-related indices suggest redundancy, indicating only one is necessary in studies. (4) Comparisons with the Fantasia database revealed less than 10% error for most indices, except SD2 and SDNN in women (greater than 15%). (5) Time-domain and nonlinear indices show low inter-study variability, while frequency-domain indices exhibit high variability, limiting cross-study comparisons. The selected indices-ApEn and IRRR (global variability), HRVi and SD2 (LF), and MADRR or rMSSD (HF)-are best suited for accurately representing HRV components and enhancing its clinical and research relevance.

Non-contact pulse wave reconstruction hinges on the precise recovery of waveform morphology, including the dicrotic notch. Conventional Red-Green-Blue (RGB)-based methods, which extract physiological signals from recorded facial videos, are constrained by the integral imaging mechanism of standard cameras, where the exposure process induces a smoothing effect that attenuates subtle vascular pulsation details. Conversely, neuromorphic event cameras, while offering exceptional sensitivity to intensity fluctuations, are inherently susceptible to noise and artifacts induced by minor motion. To exploit the synergy between frame-based integration and event-based differential sensing, we propose a novel multimodal network named Fusion-E2Pulse. This framework utilizes filtered RGB signals as structural priors to suppress motion artifacts, while leveraging the high-sensitivity of event streams to recover fine-grained morphological details. Experimental results demonstrate that Fusion-E2Pulse achieves state-of-the-art performance, effectively balancing noise suppression and morphological fidelity, achieving a mean absolute error of 0.78 bpm for heart rate estimation, a waveform correlation of 0.89, and a systolic phase duration error of 16.74 ms, validating its efficacy in reconstructing fine-grained pathological features.

Physiological awareness is important for service, social, and assistive robots that interact with humans in everyday environments. Remote photoplethysmography (rPPG) enables non-contact heart-rate (HR) estimation from an RGB camera, making it a promising sensing modality for robot-mounted vision systems. However, illumination variation remains a major barrier to robust deployment. This paper presents an end-to-end spatial-temporal transformer framework for remote HR estimation on a new dataset with varied illumination. Our estimator integrates PRNet-based 3D face alignment, clip-level illumination augmentation, the Residual Temporal Standardization Module, and controlled hybrid temporal-frequency supervision. The training objective combines a Soft-Shifted Pearson waveform loss with a spectral Kullback-Leibler divergence loss, where a tuned weight ($\mathbfβ$) controls the contribution of frequency-domain heart-rate guidance. Experiments on a static all-level mix protocol covering three illumination levels show that $\mathbfβ=5$ provides the strongest result among the tested beta settings, achieving a best-run HR mean absolute error (MAE) of 0.79 bpm and an HR correlation of 0.982. Compared with the PhysFormer baseline evaluated on our dataset, our estimator reduces HR MAE by 93.6 %, while increasing HR correlation from 0.088 to 0.982, making it usable when illumination varies.

Photoplethysmography (PPG), a non-invasive measure of changes in blood volume, is widely used in both wearable devices and clinical settings. Recent PPG foundation models either use open-source ICU datasets with pretraining paradigms that require curated data and thus complicate generalization to field-like data, or use closed-source field-like PPG data. In contrast, we propose a PPG foundation model that does not require high-quality or field-like pretraining data, and instead leverages accompanying electrocardiogram and respiratory signals in ICU datasets to select contrastive samples during pretraining. Our approach allows the model to retain and learn from noisy PPG segments, improving robustness at inference. Our model, pretrained on 3x fewer subjects than existing state-of-the-art approaches, achieves performance improvements on 14 out of 15 diverse downstream tasks, including field-like daily activity and heart rate prediction. Our results demonstrate that multimodal supervision can integrate complementary physiological information to improve the robustness of PPG foundation models and enhance their generalization to consumer-grade data.

AI-driven respiratory sound classification (RSC) is promising for automated pulmonary disease detection, yet multi-site deployment is hindered by inter-stethoscope variability. We introduce a federated domain generalization (FedDG) formulation for RSC in which clients hold recordings from different stethoscopes and the model is evaluated on an unseen device. Our empirical analysis shows that stethoscope-induced style and disease-relevant content are partially entangled, making deterministic style removal unreliable. In response, we propose BTS-CAFE, a framework combining (i) causality-inspired device-style interventions with constraints designed to limit content distortion, (ii) counterfactual metadata augmentation to relieve device and demographic shortcuts, and (iii) gradient alignment to promote device-invariant decision boundaries across clients. Built on BTS with CLAP, a multimodal language-audio pretraining model, BTS-CAFE improves the out-of-distribution ICBHI Score by 3.69 points on average over five held-out devices relative to its backbone, and outperforms conventional data augmentation and federated learning baselines in simulated device leave-out evaluations on the ICBHI and SPRSound datasets.

Periods of heightened arousal or restlessness can interfere with children's ability to focus, self-regulation, and physically calm. Technologies that encourage embodied self-regulation through tactile interaction may provide a simple and accessible means of promoting calmness. This paper investigates how interaction with a pocket-sized tactile device influences physiological and behavioral markers of calmness in typically developing children. Building on prior work examining heart rate modulation, we present new findings on how tactile interaction affects full-body movement and postural stability. We employ a device that engages children through a hand-held rhythmic vibration-matching game, designed to focus attention and encourage stillness. Eighteen children participated in a within-subjects study that involved two conditions: with and without tactile interaction with a hand-held device, while having their heart rate and body movement recorded. Results show that the tactile game interaction reduced physiological arousal (heart rate decreased by 3.56 bpm, p < 0.01) and physical restlessness (overall movement decreased by 38%, p < 0.05), with attention-related body regions showing the greatest change toward stillness (45% reduction in movement). These findings demonstrate that brief tactile game-like engagement with a hand-held device can down-regulate physiological activation, promoting the calm and focused states toward sustained attention and behavior regulation.

This paper presents the HRVConformer, a novel deep learning architecture for the classification of hypoxic-ischemic encephalopathy (HIE) using the instantaneous heart rate (HR) signal. Unlike conventional approaches that rely on handcrafted features, HRVConformer directly processes raw HR signals in an end-to-end manner, capturing both local and long-range dependencies through a hybrid Convolution-Transformer framework. By integrating convolutional layers for local feature extraction and Transformer-based attention mechanisms for global context modelling, the architecture effectively enhances signal representation and classification performance. The model was trained using supervised learning on a large HR dataset consisting of 1,573 one-hour epochs, including 259 one-hour expert-annotated epochs and a substantial set of weakly labelled data. A 314-hour validation set provided a robust performance estimation, while an independent 215-hour dataset with expert annotations was reserved for final testing. HR signals were extracted from electrocardiogram (ECG) recordings using an improved Pan-Tompkins algorithm, which significantly enhanced both signal quality and data availability. Experimental results demonstrate that the HRVConformer achieves an AUC of 83.23% and accuracy of 74.56% on the test set. These results surpass the performance of the Transformer, ResNet50 and fully convolutional networks baselines, highlighting the advantages of integrating convolutional and Transformer-based components for HR-based HIE classification. The proposed method provides a promising step toward a more accurate and automated assessment of HIE using HR signals. The code is available at: https://github.com/syu-kylin/HRVConformer.

Wearables are widely used for mobile health monitoring, and photoplethysmography (PPG) is a key sensing modality for heart rate and related physiological measurements. However, public in-the-wild PPG datasets remain largely wrist-centric or limited to short, controlled studies, constraining research on emerging wearable form factors. We present Multi-site PPG, an in-the-wild physiological dataset collected from four custom-developed unobtrusive wearables: a smart earring, ring, watch, and necklace. Each device records green and infrared reflective PPG, 3-axis acceleration, and temperature with timestamps for cross-device alignment, while a Polar H10 chest strap provides reference electrocardiogram (ECG). Participants wore the devices for multiple days during daytime activities while continuing their normal routines. The dataset contains over 350 hours of raw data and 230-290 hours of modeling-ready 8-second windows per wearable. We benchmark heuristic, supervised, and self-supervised heart-rate estimation methods, showing substantial body-site differences: the best methods achieve mean absolute errors (MAEs) of 2.30 bpm on the earring, 5.13 bpm on the ring, 8.37 bpm on the watch, and 8.68 bpm on the necklace. We further analyze motion effects and evaluate multi-site and PPG-accelerometer fusion, demonstrating the dataset's value for robust physiological sensing across emerging wearable form factors.

Defining vascular age in terms of physiological function has become one focal point of the extensive studies to categorize and track chronological age. Transcranial Doppler (TCD) is a method by which cerebral blood flow velocity is measured along the major arteries feeding the human brain. This study aims to use features extracted from TCD to estimate chronological age and assess accelerated aging in subjects with various brain diseases. We predict subjects with various brain diseases to present with accelerated cerebrovascular aging when tested on various regression models trained by healthy subjects. 168 healthy subjects and 277 diseased subjects with bilateral TCD recordings of the middle cerebral artery were analyzed using the Morphological Analysis and Clustering of Intracranial Pressure (MOCAIP) algorithm. MOCAIP-generated features and heart rate variability features were used as input features for regression models to predict the brain vascular age. 66 subjects with acute stroke, 27 subjects with post stroke, 26 subjects with Alzheimer's disease, 23 subjects with mild cognitive impairment, and 135 established subjects were tested against the machine learning model to assess for accelerated cerebrovascular age. The trained model, on average, predicted healthy subjects' cerebrovascular age to be 3.69 years above their chronological age. Subjects with different disease conditions exhibited varying levels of age acceleration. The differences in healthy and diseased subjects' performances suggest that features generated using TCD may be relevant when evaluating accelerated cerebrovascular aging. Moreover, imbalanced datasets have been observed to affect the performance of machine-learning-based brain age prediction models.

Remote photoplethysmography (rPPG) holds great promise for continuous heart-rate monitoring of drivers in intelligent vehicles. However, its performance is severely degraded by the highly dynamic illumination changes. A critical yet overlooked factor is the lack of exposure controlling during video acquisition -- most existing systems rely on either fixed exposure settings or camera build-in auto-exposure, both of which fail to maintain stable facial brightness under rapidly changing lighting conditions during driving. To address this gap, we propose a highly-adaptive exposure controlling framework that proactively adjusts exposure parameters based on predictive modeling of historical skin reflections. Unlike standard auto-exposure, our method is specifically optimized for rPPG measurement, ensuring the skin region of interest (ROI) remains within the optimal dynamic range for rPPG signal extraction. As an important contribution of this study, we introduce ExpDrive, a public in-vehicle physiological monitoring dataset comprising synchronized facial video and reference ECG from 48 subjects captured under real driving conditions. Extensive experiments demonstrate that our method consistently outperforms fixed exposure and standard auto-exposure strategies. Specifically, it reduces the Mean Absolute Error (MAE) by 6.31 bpm (from 14.1 to 7.79 bpm) and significantly increases the success rate by 32.3 percentage points (p < 0.001) (from 24.9% to 57.2%) across challenging driving scenarios. Notably, it clearly improved the performance of non-contact heart-rate monitoring in both low-light (rainy) and high-glare (sunny) conditions, validating the efficacy of exposure-aware acquisition design.

Cardiovascular disease remains the leading cause of death globally, underscoring the need for effective, accessible monitoring solutions, particularly through wearable devices that enable continuous, real-time tracking of heart rhythms in home settings. However, deploying deep learning models trained on clinical electrocardiogram (ECG) datasets to wearable devices remains challenging, as differences in recording equipment, signal quality, and patient populations introduce domain shifts that degrade model performance. We propose a hybrid transformer model that processes continuous ECG signals alongside seven heart rate variability (HRV) features, where the raw signal path captures beat-level morphological patterns and the HRV path encodes rhythm regularity statistics, allowing the model to jointly leverage complementary information from both representations. To enhance the model's ability to generalize across domains, we employ representation learning techniques, including Maximum Mean Discrepancy (MMD), a non-parametric kernel-based metric that quantifies the distance between feature distributions of different domains, to align feature distributions between source and target domains, addressing the challenge of domain shifts between public datasets and wearable device data. By leveraging five public ECG datasets for training, the model learns robust, generalized representations that mitigate domain-specific biases. When tested on wearable device data with an unseen domain, the model achieved an F1-macro 95% and balanced accuracy of 96.15%. These results demonstrate minimal performance degradation, with only a 2% drop in F1-macro compared to seen-domain evaluation, highlighting the model's generalization capabilities and its potential for reliable, real-time heart monitoring applications in home and ambulatory settings.

Consumer wearables enable continuous measurement of physiological data related to stress and recovery, but turning these streams into actionable, personalized stress-management recommendations remains a challenge. In practice, users often do not know how a given intervention, defined as an activity intended to reduce stress, will affect heart rate (HR), heart rate variability (HRV), or inter-beat intervals (BBI) over the next 15 to 120 minutes. We present a framework that predicts post-intervention trajectories and the direction of change for these physiological indicators across time windows. Our methodology combines a Transformer model for multi-horizon trajectories of percent change relative to a pre-intervention baseline, direction-of-change calls (positive, negative, or neutral) at each horizon, and an empirical study using wearable sensor data overlaid with user-tagged events and interventions. This proof of concept shows that personalized post-intervention prediction is feasible. We encourage future integration into stress-management tools for personalized intervention recommendations tailored to each person's day following further validation in larger studies and, where applicable, appropriate regulatory review.

Human-machine interfaces in industrial automation need sensing modules that monitor operator actions and physiological state. This is important in factories, vehicles, machinery cabins, and human-robot collaboration, where workload, stress, fatigue, or reduced attention can affect safety. RGB monitoring is limited by low light, shadows, and privacy concerns, while thermal infrared imaging captures skin temperature dynamics without visible illumination. This paper studies thermal video as a contactless computer vision modality for estimating electrodermal activity (EDA), heart rate (HR), and breathing rate (BR), with the goal of supporting adaptive human-machine interfaces and operator-state awareness. We propose a signal-processing pipeline that tracks facial regions, aggregates thermal signals, and separates slow sudomotor trends from faster cardiorespiratory components. HR is estimated using orthogonal matrix image transformation (OMIT) across multiple facial regions, while BR is estimated from nasal and cheek thermal signals using spectral peak detection. We characterize 288 ROI-method configurations against contact references with lag-tolerant metrics using 31 sessions from the public SIMULATOR STUDY 1 (SIM1) driver monitoring dataset. The best fixed EDA configuration reaches a mean absolute correlation of $0.40 \pm 0.23$ against palm EDA, with individual sessions reaching $0.89$. BR estimation achieves $3.1 \pm 1.1$ bpm mean absolute error, while HR estimation yields $13.8 \pm 7.5$ bpm MAE, limited by the $7.5$ Hz thermal camera frame rate. The results show that thermal video provides useful respiratory and sudomotor cues, while revealing limitations caused by ROI selection, polarity changes, latency, and subject variability. These findings provide baseline design guidance for thermal computer vision as an auxiliary sensing layer in adaptive industrial HMI systems.

Respiratory activity is a direct and interpretable physiological channel for wearable stress and affective-state recognition, yet many studies emphasize classification accuracy without identifying which respiratory properties separate different states. Using the chest respiratory channel of the WESAD dataset, we analyze 60 s windows under leave-one-subject-out validation and combine two complementary branches: compact raw-signal one-dimensional convolutional neural networks (1D-CNNs) and physically grouped handcrafted respiratory signatures. The primary task is stress versus non-stress detection, while baseline, stress, amusement, and meditation are additionally analyzed in a one-vs-rest setting to reveal state-specific respiratory markers. The feature space is organized into respiratory timing, breath-to-breath variability, waveform statistics, spectral/time-frequency descriptors, and autocorrelation/nonlinear predictability descriptors, with the raw 60 s signal treated as a sixth representation for the CNN branch. We introduce autocorrelation transition lags (Zpm/Zmp) as interpretable markers of respiratory correlation scale and separately evaluate exploratory forecast-error-growth/Lyapunov-like descriptors. In the final CNN refit setting, the raw-signal model achieved the strongest stress-vs-rest performance (accuracy 96.72%, macro-F1 95.30%, MCC 90.61%). In contrast, compact feature models were stronger for baseline (MCC 65.34%), amusement (MCC 35.69%), and especially meditation (MCC 88.65%). Strict nested reanalysis of the auxiliary Top-20 stress search yielded mean MCC=82.29% versus 85.45% originally, indicating modest selection optimism. These results show that CNNs are most useful for the practical stress detector, whereas interpretable respiratory signatures provide stronger and more physiologically transparent state-specific markers for several non-stress conditions.