Neural Network Quantization

Kolmogorov--Arnold Networks (KANs) replace linear weights with spline-based functions, offering strong expressivity but posing challenges for low-precision deployment due to heterogeneous parameter distributions. We introduce QuantKAN, the first unified framework for quantization-aware training (QAT) and post-training quantization (PTQ) of KANs. The framework employs branch-aware quantizers for base and spline parameters and extends modern QAT and PTQ methods to spline-based layers across EfficientKAN, FastKAN, PyKAN, and KAGN. Experiments on MNIST, CIFAR-10/100, TinyImageNet, and ImageNet provide the first unified QAT/PTQ KAN benchmarks and show that DSQ is the most robust QAT method at aggressive low-bit settings, while GPTQ is the strongest PTQ method at moderate precision. Sensitivity analyses reveal architecture-specific failure modes: spline/basis parameters dominate in FastKAN, while base or scaling parameters dominate in EfficientKAN, GRAM, and PyKAN. Vivado HLS estimates on a Xilinx UltraScale+ device further suggest up to 3.32$\times$ throughput and 7.7$\times$ lower estimated dynamic energy per inference under W4A4, exposing a residual \emph{basis-evaluation tax} that motivates basis-aware microarchitecture. QuantKAN is available at https://github.com/OSU-STARLAB/QuantKAN/.

Many LLM applications require only narrow capabilities, yet standard post-training quantization (PTQ) methods allocate precision without considering the target task. This can waste bits on layers that are less relevant to the task signal while over-compressing layers that are critical for downstream behavior. We propose Task-Aware Quantization (TAQ), a training-free, weight-only mixed-precision PTQ framework that uses a small set of unlabeled task calibration prompts to allocate higher precision to task-relevant transformer layers under a fixed bit budget. TAQ estimates layer importance from hidden representations and output sensitivity, and we instantiate it with three scoring rules: TAQ-IS, based on activation information and stability; TAQ-KL, based on output-distribution sensitivity under a quantization-noise proxy; and TAQ-O, a label-informed oracle diagnostic for analyzing layer sensitivity. Across several benchmarks, TAQ outperforms task-agnostic baselines such in most settings, with especially strong gains in the accuracy--memory ratio. We further validate that these gains translate to real deployment behavior through hardware throughput and latency measurements, and analyze calibration robustness and residual-stream error propagation. Overall, TAQ turns mixed-precision PTQ from a model-centric compression step into a task-conditioned precision-allocation problem. A reference implementation is available at \includegraphics[height=1em]{imgs/github-mark.png}.

Large pretrained vision encoders are central to multimodal intelligence, powering applications from on-device vision processing to vision-language models. Since these applications often demand real-time processing of massive visual data, reducing the inference cost of vision encoders is critical. Quantization offers a practical path, but it remains challenging even at 8-bit precision due to so-called outliers. In this work, we propose $\textit{RegCache}$, a training-free algorithm that mitigates outliers in large-scale pretrained vision encoders and serves as a plug-in module that can be applied on top of other quantization methods. RegCache introduces outlier-prone yet semantically meaningless prefix tokens to the vision encoder, which prevent other tokens from having outliers. Notably, we observe that outliers in vision encoders behave differently from those in language models, motivating two technical innovations: middle-layer prefixing and token deletion. Experimental results show that our method consistently improves quantized model performance across various vision encoders, particularly in extremely low-bit regimes (e.g., 4-bit).

Cooperative perception through Vehicle-to-Everything (V2X) communication offers significant potential for enhancing vehicle perception by mitigating occlusions and expanding the field of view. However, past research has predominantly focused on improving accuracy metrics without addressing the crucial system-level considerations of efficiency, latency, and real-world deployability. Noticeably, most existing systems rely on full-precision models, which incur high computational and transmission costs, making them impractical for real-time operation in resource-constrained environments. In this paper, we introduce \textbf{QuantV2X}, the first fully quantized multi-agent system designed specifically for efficient and scalable deployment of multi-modal, multi-agent V2X cooperative perception. QuantV2X introduces a unified end-to-end quantization strategy across both neural network models and transmitted message representations that simultaneously reduces computational load and transmission bandwidth. Remarkably, despite operating under low-bit constraints, QuantV2X achieves accuracy comparable to full-precision systems. More importantly, when evaluated under deployment-oriented metrics, QuantV2X reduces system-level latency by 3.2$\times$ and achieves a +9.5 improvement in mAP30 over full-precision baselines. Furthermore, QuantV2X scales more effectively, enabling larger and more capable models to fit within strict memory budgets. These results highlight the viability of a fully quantized multi-agent intermediate fusion system for real-world deployment. The system will be publicly released to promote research in this field: https://github.com/ucla-mobility/QuantV2X.

Large language models (LLMs) have demonstrated remarkable capabilities across diverse language tasks, motivating their extension to vision-language models (VLMs) for multimodal understanding. However, billion-parameter VLMs incur substantial memory and computational costs that hinder deployment in resource-constrained settings. Post-training quantization (PTQ) compresses models and accelerates inference without retraining, yet remains underexplored for VLMs. We identify two intrinsic VLM activation properties in PTQ: (1) visual over-representation, where vision tokens are excessive and often redundant, and (2) the modality gap separating text and vision tokens in the latent feature space. Prior methods largely overlook these properties, leading to quantization performance degradation. To address this mismatch, we propose SalQ-VLM, an importance-aware PTQ framework that prioritizes salient tokens and suppresses redundant vision tokens during calibration. We derive a gradient-driven importance factor that captures token-level importance variance and is theoretically grounded in the relationship among loss perturbation, activation errors, and output gradients. SalQ-VLM obtains this factor through a single lightweight block-wise gradient-caching pass and incorporates it into the layer-wise reconstruction objective. Because SalQ-VLM modifies only calibration, it adds no inference-time operations and remains compatible with existing high-performance kernels. Extensive evaluations across benchmarks and backbones show that SalQ-VLM consistently outperforms strong PTQ baselines, especially under ultra-low-bit quantization. Notably, it improves MME-RealWorld accuracy by 16.45% under INT2g128 quantization.

Deploying large language models (LLMs) is challenging due to their massive parameters and high computational costs. Ultra low-bit quantization can significantly reduce storage and accelerate inference, but extreme compression (i.e., mean bit-width <= 2) often leads to severe performance degradation. To address this, we propose Squeeze10-LLM, effectively "squeezing" 16-bit LLMs' weights by 10 times. Specifically, Squeeze10-LLM is a staged mixed-precision post-training quantization (PTQ) framework and achieves an average of 1.6 bits per weight by quantizing 80% of the weights to 1 bit and 20% to 4 bits. We introduce Squeeze10LLM with two key innovations: Post-Binarization Activation Robustness (PBAR) and Full Information Activation Supervision (FIAS). PBAR is a refined weight significance metric that accounts for the impact of quantization on activations, improving accuracy in low-bit settings. FIAS is a strategy that preserves full activation information during quantization to mitigate cumulative error propagation across layers. Experiments on LLaMA and LLaMA2 show that Squeeze10-LLM achieves state-of-the-art performance for sub-2bit weight-only quantization, improving average accuracy from 43% to 56% on six zero-shot classification tasks--a significant boost over existing PTQ methods.

Vision Transformers (ViTs) are essential in computer vision but are computationally intensive, too. Model quantization, particularly to low bit-widths like 4-bit, aims to alleviate this difficulty, yet existing Post-Training Quantization (PTQ) and Quantization-Aware Training (QAT) methods exhibit significant limitations. PTQ often incurs substantial accuracy drop, while QAT achieves high accuracy but suffers from prohibitive computational costs, limited generalization to downstream tasks, training instability, and lacking of open-source codebase. To address these challenges, this paper introduces General, Practical, and Lightning Quantization (GPLQ), a novel framework designed for efficient and effective ViT quantization. GPLQ is founded on two key empirical insights: the paramount importance of activation quantization and the necessity of preserving the model's original optimization basin'' to maintain generalization. Consequently, GPLQ employs a sequential activation-first, weights-later'' strategy. Stage 1 keeps weights in FP32 while quantizing activations with a feature mimicking loss in only 1 epoch to keep it stay in the same ``basin'', thereby preserving generalization. Stage 2 quantizes weights using a PTQ method. As a result, GPLQ is 100x faster than existing QAT methods, lowers memory footprint to levels even below FP32 training, and achieves 4-bit model performance that is highly competitive with FP32 models in terms of both accuracy on ImageNet and generalization to diverse downstream tasks, including fine-grained visual classification and object detection. We will release an easy-to-use open-source toolkit supporting multiple vision tasks.

Large Language Model (LLM) inference is typically memory-intensive, especially when processing large batch sizes and long sequences, due to the large size of key-value (KV) cache. Vector Quantization (VQ) is recently adopted to alleviate this issue, but we find that the existing approach is susceptible to distribution shift due to its reliance on calibration datasets. To address this limitation, we introduce NSNQuant, a calibration-free Vector Quantization (VQ) technique designed for low-bit compression of the KV cache. By applying a three-step transformation-1) a token-wise normalization (Normalize), 2) a channel-wise centering (Shift), and 3) a second token-wise normalization (Normalize)-with Hadamard transform, NSNQuant effectively aligns the token distribution with the standard normal distribution. This alignment enables robust, calibration-free vector quantization using a single reusable codebook. Extensive experiments show that NSNQuant consistently outperforms prior methods in both 1-bit and 2-bit settings, offering strong generalization and up to 3$\times$ throughput gain over full-precision baselines. Code is available at https://github.com/DHdroid/NSNQuant.

Mixture-of-Experts (MoE) has become a practical architecture for scaling LLM capacity while keeping per-token compute modest, but deploying MoE models on a single, memory-limited GPU remains difficult because expert weights dominate the HBM footprint. Existing expert offloading and prefetching systems reduce the resident set, yet they often pay expert-loading costs on the critical path when activation becomes dense. Post-training quantization (PTQ) lowers the footprint without transfers, but prevailing pipelines fix expert bit-widths offline and assume routing remains stable, even though MoE expert utilization is heavy-tailed and the hot set can shift across workloads. We present DynaExq, a runtime-aware mixed-precision serving system that treats single-GPU MoE inference under a hard HBM envelope as an online, budget-constrained precision allocation problem. The key insight is to keep the experts that dominate runtime traffic resident at higher precision, while maintaining a low-precision fallback for the remaining experts, so the system can reduce transfer volume and avoid the waiting latency that limits offloading and prefetching under dense activation. DynaExq estimates long-horizon expert hotness from router traces, selects a per-layer high-precision resident set via a budget-feasible top-$n$ rule, and applies promotions and demotions asynchronously through stable expert handles so the forward pass always executes on a fully materialized expert version. Across Qwen3-MoE-30B/80B and six benchmarks, DynaExq improves accuracy over static PTQ on Qwen3-80B (73.09% to 77.57%) under comparable device-memory budgets and achieves up to 2.73x higher throughput than offloading/prefetch baselines at batch size 32.

Post-training quantization (PTQ) is a practical way to reduce the memory footprint of large language models, but low-bit quantization is sensitive to mismatches between the quantization codebook and the empirical weight/activation distributions. We revisit Benford-like leading-digit statistics as a lightweight diagnostic of scale-broad behavior in transformer tensors. Across several model families, we observe a consistent functional dichotomy: transformational nn.Linear weights tend to be Benford-like, whereas LayerNorm parameters systematically deviate. Motivated by this observation, we propose BenQ, a data-free PTQ codebook that uses a simple log-spaced grid as a proxy for scale-broad distributions and applies it selectively to transformational layers while keeping stability-critical parameters in higher precision. In 4-bit group-wise PTQ, BenQ consistently improves over uniform RTN and trades wins with NF4 across architectures and tasks, while remaining substantially simpler than optimization-based methods. We additionally report dynamic activation quantization as an exploratory stress test: the results show that log-spaced grids can reduce RTN failures in some families, but also reveal that outlier handling remains essential for reliable low-bit activation PTQ. Code is available at https://github.com/ufopcsilab/benford-quant.

Quantization-aware training (QAT) is essential for extremely low-bit large language models (LLMs). Current QAT methods are mainly based on scalar quantization (SQ), which enables efficient optimization but suffers from severe performance degradation at 2-bit precision. On the other hand, vector quantization (VQ) provides substantially higher representational capacity, but its discrete codebook lookup prevents end-to-end training. We propose LC-QAT, a 2-bit weight-only VQ-QAT framework that represents quantized weights via a learned affine mapping over discrete vectors, which yields a high-quality PTQ initialization and enables fully differentiable end-to-end optimization without explicit codebook lookup in the training forward pass. This strong post-training initialization makes LC-QAT highly data-efficient. Experiments across diverse LLMs demonstrate that LC-QAT consistently outperforms state-of-the-art QAT methods while using only 0.1%--10% of the training data. Our results establish LC-QAT as a practical and scalable solution for extreme low-bit model deployment. Codes are publicly available at https://github.com/AI9Stars/UniSVQ.

Post-training quantization (PTQ) of large language models degrades sharply below 4-bit precision. We identify the root cause as residual stream distributional drift: quantization noise injected at each transformer layer accumulates in the shared residual representation, causing KL divergence from the FP16 baseline to grow super-linearly with depth (Pearson r=0.999 with log-perplexity, p<0.001, confirmed across all tested methods and bit-widths). We discover that 84% of LLaMA-3-8B layers exhibit non-Gaussian residual distributions (KS test, p<=0.05), and that per-layer residual stream variance grows 6,548x across depth. We propose RDQ (Residual Distribution Quantization), a PTQ framework whose central contribution is Cascaded Error Compensation (CEC): a sequential calibration procedure that captures the actual drifted activations each layer receives (computed by running calibration data through already-quantized upstream layers) and fits per-channel AWQ-style scales against those drifted inputs, with scales folded into preceding RMSNorm weights for exact mathematical equivalence at zero inference overhead. RDQ achieves state-of-the-art results on all three tested architectures: LLaMA-3-8B: 7.55 / 5.62 PPL (W3/W4); Qwen-2.5-7B: 7.46 / 6.38 PPL; Mistral-7B: 6.88 / 5.73 PPL. RDQ beats the best published baseline (LeanQuant/SpinQuant) at every model and bit-width combination, with gains up to -46.4% vs. RTN at W3A16 on LLaMA-3-8B. All output is standard group-128 asymmetric quantization, deployable on Qualcomm AIMET, GGUF, and any standard inference stack at zero runtime overhead.