Quantization Error Compensation

Neural image codecs face a fundamental trade-off between pixel fidelity and perceptual quality. Distortion-optimized codecs preserve pixel-wise fidelity but produce blurred reconstructions at low bitrates, whereas generative codecs leverage learned priors to improve perceptual quality but tend to exhibit saturating PSNR at higher bitrates and require separate models for different bitrate targets. We propose PerQ, which reframes perceptual reconstruction as inverse generative modeling with bounded support. Specifically, we define the quantization cell as the set of latents that yield the same transmitted symbols and derive a transport bound showing that reconstructions from this cell remain within a rate-determined radius of the codec output. This motivates performing generative reconstruction within the codec-induced quantization cell, rather than sampling from an unconstrained image prior. PerQ implements this principle by attaching a rate-conditioned flow-matching compensator to a frozen, multi-rate distortion-optimized backbone, enabling perceptual enhancement while preserving the backbone's coding performance. Experiments on Kodak and CLIC2020 show that PerQ achieves perceptual performance comparable to generative codecs such as MS-ILLM in LPIPS and FID, while maintaining competitive PSNR relative to distortion-optimized codecs such as ELIC. A single model checkpoint supports a wide bitrate range with fast decoding, and the compensator provides consistent gains across three different backbones. The implementation is available at https://jasminepp.github.io/PerQ/.

Layer-wise post-training quantization methods let each layer compensate for the quantization error inherited from earlier layers. We ask under what assumptions such compensation guarantees a network output error no larger than without it. For linear networks of any depth, with the required calibration Gram matrices invertible, if the rounding error of each layer has zero conditional mean and a deterministic second-moment map common to both schemes, as under subtractive dither on an unbounded grid, then compensation with strengths in $[0,1]$ fixed in advance gives a mean-square output error no larger than no compensation, each scheme being followed along its own trajectory. The exact gain separates error removed directly from reduced excitation of later rounding noise. Outside this setting the comparison can fail. With rectified linear activations it fails for two independent reasons: noise changes activation states, and, even when no state changes, the correction moves error from samples on which a unit is inactive to samples on which it is active. With stable activations, commutators between the calibration projection and the activation patterns bound the excess. With a bounded codebook, even unique exact layer-wise minimizers with no overload can give a larger output error. For fixed rounding errors it already fails for two scalar linear layers, refuting a published universal guarantee. An exact residual identity gives the necessary and sufficient condition on a common layer input. All these comparisons hold the calibration input fixed. On two 8B models at 4 bits, fixed half-strength compensation beat uncompensated rounding in every model, text and draw tested, yet no rule for choosing the strength beat a layer-wise rule consistently, and lowering the full-network loss on the data used to choose did not reliably lower it on new text.

Low-rank quantization error compensation (LQEC) recovers the accuracy lost under aggressive weight quantization by attaching a closed-form rank-$r$ adapter beside each frozen quantized weight, without any training. We show that existing compensators are limited by two shared simplifications. They calibrate symmetrically, evaluating the full-precision and compensated weights on the same activation, which yields a compensation target that is inherently high-rank -- so a fixed rank budget captures only a small fraction of it. And they minimize only the second-order term of the loss, although the compensated model is not stationary: a first-order descent direction larger than the applied compensation itself remains in every layer, and no reconstruction objective can absorb it. We propose a two-stage closed-form framework that removes both simplifications. Stage 1 aligns each layer's output with the full-precision model under a Fisher-weighted asymmetric objective, concentrating the rank budget on a rank-compressible target. Stage 2 re-measures statistics on the compensated model and applies a rank-constrained natural-gradient step that absorbs the remaining first-order signal. Every adapter is the result of a single truncated SVD; backward passes serve only to collect statistics. At 2 bits under QuIP#, our method reduces WikiText-2 perplexity from 12.43 to 10.26 on Qwen3-8B and from 21.11 to 13.22 on Qwen3-4B. On the held-out C4 corpus, it recovers 51% and 84% of the gap to FP16, versus 31% and 63% for the strongest baseline, with consistent gains in the seven-task zero-shot average, at higher bit-widths, and under a distinct quantizer.

Quantization errors in video diffusion transformers can be amplified or attenuated by subsequent denoising updates, making local reconstruction error an incomplete predictor of final impact. We introduce PulseQuant, a 4-bit post-training quantization method that combines trajectory sensitivity with activation geometry to guide offline calibration. Isolated block--step interventions estimate propagation risk, which prioritizes sensitive trajectory states during row-radius selection. With these radii fixed, response-subspace correction uses neighboring-code edits to reduce residual components along dominant activation directions. Both stages preserve the original 4-bit weight representation. Controlled interventions show that short-horizon propagated error predicts final latent error more reliably than immediate block-output error, supporting calibration beyond local reconstruction objectives. Evaluations on Wan models, Self Forcing, and MiniMax-H3 demonstrate improvements in key consistency and dense-reference metrics while remaining competitive on other attributes across model scales and generation paradigms.

Post-training weight-activation quantization reduces the memory and inference costs of large language models, but aggressive W4A4 quantization remains difficult because activation outliers degrade effective quantization resolution. Although weight optimization, channel-wise scaling, and orthogonal rotation mitigate this problem, the error components they address and their relationship remain unclear. Using an exact decomposition of local weight-activation quantization error into an activation-guided weight compensation term and an orthogonal residual, we bound the residual using persistent channel-wise outlier and regular activation quantities. This decomposition clarifies which error components can be addressed by weight compensation and which require transformation design. We then use the residual bounds to derive practical guidelines for applying randomized Hadamard rotation, sign selection, and channel scaling. In particular, the analysis explains how random signs suppress constructive interference among persistent outlier channels, how sampling multiple sign patterns can improve transformation selection, and how second-moment balancing leads to an $L_2$ scaling rule while a further relaxation recovers SmoothQuant-style $L_\infty$ scaling. We evaluate these guidelines through backpropagation-free configurations across eight Llama and Mistral models, obtaining performance competitive with gradient-trained SpinQuant.

Quantization correction methods usually optimize weights, quantization parameters, or reconstruction objectives, while the underlying parameter subspaces responsible for effective correction remain unclear. In this work, we study quantization correction from a parameter subspace perspective and reveal that correction capability is highly non-uniform across parameter groups. By decomposing trainable parameters into backbone weights, normalization-affine parameters, and quantization parameters, we show that the low-dimensional normalization-affine subspace provides a highly efficient correction direction under matched budgets. Based on this finding, we propose SandwichQuant, a two-stage normalization-affine correction framework that performs adaptation before and after quantization. The pre-stage improves quantization robustness, while the post-stage compensates residual errors after the quantized graph is fixed. Extensive experiments on vision models and large language models demonstrate consistent improvements under various low-bit quantization settings, validating the effectiveness of subspace-aligned correction.

Recent training-free post-training quantization methods restore model accuracy through closed-form residual compensation. To constrain additional model storage overhead, several existing methods gate layer selection by goodness-of-fit, retaining only those layers whose compensation yields a positive residual fit score and discarding the rest. In this paper, we show that, under the low-bit W4A4 setting, this gating mechanism fails to distinguish poorly predictable quantization error from numerical solver failure. Rank-deficient input activations yield severely ill-conditioned or numerically singular Gram matrices, causing the closed-form solver to become unstable and produce spuriously negative fit scores. Consequently, existing goodness-of-fit gates misclassify affected layers as uncompensable and discard them. Many of these discarded layers can nevertheless provide substantial error recovery when their compensation is computed using a numerically stable solver. To address this problem, we propose a parameter-free truncated pseudoinverse solver which removes collapsed directions prior to inversion. On ViT-B with the W4A4 setting, our training-free method achieves 81.42% top-1 accuracy, outperforming prior post-training methods and fine-tuning-based baselines. Combined with joint low-rank and quantization compression, the proposed method reaches a deployable operating point of 80.26% accuracy at 54.7 MB, providing a well-balanced trade-off between model size and accuracy.

Aggressive quantization disproportionately harms multilingual capability: in the sub-4B INT3 GPTQ regime, we measure 2-4x larger perplexity degradation on non-English languages than on English. We propose Language-Conditional Dequantization (LCD), a post-hoc method that attaches per-language rank-2 LoRA corrections to the linear layers of an already-quantized model, adding 0.12% parameters per language and training in under 20 minutes on a single GPU. Across Qwen2.5-3B and Llama-3.2-3B, LCD recovers 70-83% of the perplexity gap for non-Latin script languages and 17-28% of the GlobalMMLU accuracy gap, outperforming a language-agnostic correction of equal capacity by 3-9 points on typologically distant languages and a data-free low-rank baseline (LQER) by an order of magnitude. We further identify a perplexity-accuracy disconnect and trace it to where quantization concentrates damage: early-depth errors (Llama) propagate downstream and resist local correction, while late-depth errors (Qwen) do not. A layer-restricted variant of LCD validates this mechanism directly.

Layer-wise post-training quantization of large language models minimizes each layer's reconstruction error in isolation, allowing quantization errors to accumulate across depth and causing severe degradation in extreme low-bit regimes. We formulate quantization as a joint optimization over the discrete codes and scales of all layers, driven by two mechanisms: (i) cross-layer error compensation, which maintains the network-level accumulated error through the recursion e_{l+1} = A_l e_l + q_l, with a propagation operator A_l derived from the layer's input differential and a local quantization residual q_l evaluated at teacher features; and (ii) finite-sample feature-statistics matching, which aligns means, projected covariances, and centered empirical kernels between the full-precision and quantized networks under relative normalization. We prove that instantiating the propagation operator as a finite difference of the quantized network makes the recursion exact for arbitrary nonlinear layers, enabling an efficient forward-difference implementation. Binary weights are optimized via a mirror-descent parameterization u = tanh(beta*z) with annealed inverse temperature and group-wise log-scales. On Qwen2.5-1.5B with 1.125-bit group-binary weights, error compensation alone reaches a perplexity ratio of 9.56 +/- 0.15 over the FP16 teacher, outperforming logit distillation (14.09 +/- 0.53; 32 percent relative, more than 8 sigma over 3 seeds) and layer-local reconstruction by two orders of magnitude. The same objective transfers unchanged to 4-bit quantization (1.060 vs. 1.088 for layer-local). Out-of-domain evaluations (C4, CNN/DailyMail) show the advantage of error compensation grows off-domain, while statistics matching keeps feature-statistics discrepancy low off-domain (0.42-0.88 vs. 1.41-2.99 without it), revealing a complementary division of labor between the two mechanisms.

Post-training quantization (PTQ) of large language models degrades sharply below 4-bit precision. We identify the root cause as residual stream distributional drift: quantization noise injected at each transformer layer accumulates in the shared residual representation, causing KL divergence from the FP16 baseline to grow super-linearly with depth (Pearson r=0.999 with log-perplexity, p<0.001, confirmed across all tested methods and bit-widths). We discover that 84% of LLaMA-3-8B layers exhibit non-Gaussian residual distributions (KS test, p<=0.05), and that per-layer residual stream variance grows 6,548x across depth. We propose RDQ (Residual Distribution Quantization), a PTQ framework whose central contribution is Cascaded Error Compensation (CEC): a sequential calibration procedure that captures the actual drifted activations each layer receives (computed by running calibration data through already-quantized upstream layers) and fits per-channel AWQ-style scales against those drifted inputs, with scales folded into preceding RMSNorm weights for exact mathematical equivalence at zero inference overhead. RDQ achieves state-of-the-art results on all three tested architectures: LLaMA-3-8B: 7.55 / 5.62 PPL (W3/W4); Qwen-2.5-7B: 7.46 / 6.38 PPL; Mistral-7B: 6.88 / 5.73 PPL. RDQ beats the best published baseline (LeanQuant/SpinQuant) at every model and bit-width combination, with gains up to -46.4% vs. RTN at W3A16 on LLaMA-3-8B. All output is standard group-128 asymmetric quantization, deployable on Qualcomm AIMET, GGUF, and any standard inference stack at zero runtime overhead.

Efficient large language model (LLM) serving is increasingly constrained by deployment cost. Quantization is a key technique for reducing serving cost, yet even state-of-the-art 4-bit quantizers exhibit a noticeable quality gap from FP16, particularly for smaller models where low-bit serving is most beneficial. We identify a fundamental cause of this gap: quantization error is highly input-dependent and varies substantially across tokens, while existing post-quantization compensation methods are static and apply identical corrections to all inputs. As a result, easy tokens are over-corrected while hard tokens remain under-corrected. We present SPEAR, a system for post-quantization error-adaptive recovery that improves low-bit LLM serving. SPEAR introduces lightweight Error Compensators (ECs) modulated by per-token gates and places them only at the most error-sensitive layers identified through a CKA-guided entropy-aware diagnostic. This focuses a small parameter budget where it is most effective. Efficient deployment of ECs presents several systems challenges, including additional computation, tensor-parallel synchronization caused by input-dependent gating, and latency instability across configurations. SPEAR addresses these issues through adaptive kernel-fusion dispatch, combining an epilogue-integrated peer-reduction kernel with P2P dual-write to fuse the post-EC computation into low-bit GEMMs, and an SLO-constrained EC-aware scheduler for predictable serving performance. Across challenging per-channel quantization settings, SPEAR recovers 56-75% of the perplexity gap between W4 and FP16 while adding less than 1% model memory overhead and maintaining latency comparable to a widely used 4-bit serving deployment.

MXFP4 arithmetic can dramatically accelerate reinforcement learning (RL) post-training of large language models (LLMs), yet the quantization error introduces severe accuracy degradation. Existing work treats the quantization error as a monolithic noise term, missing the distinct mechanisms upon interpreting how quantization error damages training. We prove an exact three-way decomposition of quantization error and show how each component dominates a distinct RL training pathway. Our theoretical and empirical analysis decomposes the MXFP4 quantization error into three additive components: "scale bias" from power-of-two rounding, "deadzone truncation" from zeroing small values, and "grid noise" from rounding to the nearest 4-bit grid. Each component dominates a distinct RL failure mode: scale bias accumulates multiplicatively through the backward pass, affecting gradient accuracy; deadzone truncation degrades rollout quality; and grid noise raises the policy's entropy. We combine corrections that are RL failure mode-targeted but not component-exclusive: Macro-block scaling to reduce scale bias, Outlier Fallback recovers deadzone entries, but also partially reduces scale bias induced error, and Adaptive Quantization Noise (AQN) for controlling the policy entropy. On Qwen2.5-3B dense and Qwen3-30B-A3B-Base mixture-of-experts model, the targeted corrections recover BF16 accuracy to within 0.7% and exceed BF16 by +1.0% respectively.

Recently, residual reconstruction-based model quantization methods have achieved promising performance in low-bit post-training quantization (PTQ) by introducing cross-layer residuals to reduce error accumulated from previous layers.However, these residuals may also introduce additional bias arising from the Hessian-approximation (HA) assumption underlying reconstruction-based PTQ, leading to suboptimal quantization performance.In this work, we analyze that multiplying the residual term by a scaling coefficient provides a direct way to mitigate the HA bias associated with residual strength, while preserving accumulated-error correction. More importantly, we observe that this trade-off is module-dependent, making a single global residual strength insufficient to balance effective correction and residual-related bias across modules.Based on these observations, we propose Module-Adaptive Residual Reconstruction (MARR), which assigns a module-specific scaling coefficient to adaptively balance accumulated-error correction and residual-related HA bias for each module.To avoid expensive per-module coefficient search and obtain a stable coefficient estimate, we design a Proportional-Integral-Derivative (PID)-based adaptive update strategy that uses reconstruction error as feedback to progressively refine this coefficient. Experiments on several typical large language models (LLMs) and vision transformers (ViTs) demonstrate the effectiveness of MARR under low-bit quantization (less than or equal to 4-bit), achieving up to 20.2% performance gains on LLMs and up to 4.6% relative gains on ViTs over the residual reconstruction state-of-the-art methods.Code will be made publicly available upon acceptance.

Network quantization has emerged as one of the most practical model compression techniques, which significantly reduces a model's memory and compute consumption by mapping floating-point numbers to low-bit representations. However, existing quantization methods typically suffer from the speed-accuracy tradeoff and limited generalization. To address these issues, recent compensation-based methods offer an efficient yet general solution by introducing additional lightweight linear layers into the quantized network. However, the accuracy of these methods suffers from their limited compensation capability and high sensitivity to outliers. In this paper, we propose Nonlinear Bipolar Compensation (NBC), a post-training quantization approach that introduces nonlinear compensation to reduce the effect of outliers. We further design Bipolar Logarithmic Transformation (BLT), which compresses outliers by mapping both the quantized input and the quantization error into a transformed space. A simple linear layer is then applied for compensation in the transformed space, preserving the efficiency of our method. Extensive experiments across various tasks, models, and quantization methods confirm the effectiveness, efficiency, robustness, and generality of our NBC approach.

Methods based on weight compensation, which iteratively apply quantization and weight compensation to minimize the output error, have recently demonstrated remarkable success in quantizing Large Language Models (LLMs). The representative work, GPTQ, introduces several key techniques that make such iterative methods practical for LLMs with billions of parameters. GPTAQ extends this approach by introducing an asymmetric calibration process that aligns the output of each quantized layer with its full-precision counterpart, incorporating a residual error into the weight compensation framework. In this work, we revisit the formulation of the residual error. We identify a sub-optimal calibration objective in existing methods: during the intra-layer calibration process, they align the quantized output with the output from compensated weights, rather than the true output from the original full-precision model. Therefore, we redefine the objective to precisely align the quantized model's output with the original output of the full-precision model at each step. We then reveal that the residual error originates not only from the output difference of the preceding layer but also from the discrepancy between the compensated and original weights within each layer, which we name the 'compensation-aware error'. By inheriting the neuron decomposition technique from GPTAQ, we can efficiently incorporate this compensation-aware error into the weight update process. Extensive experiments on various LLMs and quantization settings demonstrate that our proposed enhancements integrate seamlessly with both GPTQ and GPTAQ, significantly improving their quantization performance. Our code is publicly available at https://github.com/list0830/ResComp.

The emergence of fine-grained numerical formats like NVFP4 presents new opportunities for efficient Large Language Model (LLM) inference. However, it is difficult to adapt existing Post-Training Quantization (PTQ) strategies to these formats: rotation-based methods compromise fine-grained block isolation; smoothing techniques struggle with significant 4-bit quantization errors; and mixed-precision approaches often conflict with hardware constraints on unified-precision computation. To address these challenges, we propose ARCQuant, a framework that boosts NVFP4 performance via Augmented Residual Channels. Distinct from methods that compromise block isolation or hardware uniformity, ARCQuant maintains a strictly unified NVFP4 format by augmenting the activation matrix with quantized residual channels. This design integrates the error compensation process directly into the matrix reduction dimension, enabling the use of standard, highly optimized GEMM kernels with minimal overhead. Theoretical analysis confirms that the worst-case error bound of our dual-stage NVFP4 quantization is comparable to that of standard 8-bit formats such as MXFP8. Extensive experiments on LLaMA and Qwen models demonstrate that ARCQuant achieves state-of-the-art accuracy, comparable to full-precision baselines in perplexity and downstream tasks. Furthermore, deployment on RTX 5090 and RTX PRO 6000 GPUs confirms practical benefits, achieving up to 3x speedup over FP16. Our code is available at https://github.com/actypedef/ARCQuant.