Remote Sensing Infrared Image Super-Resolution

Latest papers

10 papers1 paper in the last four weeks, with none the four weeks before. 0.0% of all new papers.

Oct 4, 2026

TIRMamba: A Thermal-Prior-Modulated State-Space Network for Sub-Million-Parameter Infrared Image Super-Resolution

Infrared image super-resolution is currently led by Mamba-based networks with 26 to 37 million parameters, which are difficult to deploy on the airborne and handheld platforms where thermal imaging is most needed. This paper presents TIRMamba, a network with 896K to 910K parameters for single-channel thermal imagery. A Thermal Prior Highway computes gradient, local-contrast and spectral cues once at the input and, through one adapter per residual group, modulates a weight-tied bidirectional state-space trunk and gates its dual-scale detail branch; a tri-path reconstruction adds the learned residual to a bicubic radiometric baseline. Because the standard benchmark provides only 265 infrared training images and evaluates fusion products on full images, we train with a replay strategy: grayscale DIV2K pre-training followed by fine-tuning on 64-pixel patches drawn with equal probability from the infrared and natural corpora. At scale factor 4, TIRMamba matches the strongest protocol-trained methods on both official test sets with 29 to 40 times fewer parameters and 2.8 to 9.4 times lower latency; at scale factor 2 it gives the highest SSIM on both. A variant with prior-conditioned selectivity, TIRMamba-Rad, corrects a 3 dB raw-thermal failure of an intermediate size-invariant design and gives the best results at scale factor 4 on raw-thermal, unmanned-aerial-vehicle and independent-sensor test sets. Code and trained models will be released at https://github.com/julian135707/TIRMamba upon acceptance.
Aug 10, 2026

OGG-FR: Orthogonal Gradient Gaming and Frequency Rectification for Unmanned Aerial Vehicle Infrared Image Super-Resolution

Unmanned aerial vehicle (UAV) infrared image super-resolution aims to recover weak thermal structures for deployment on resource-constrained platforms; lightweight models are therefore preferred, but multi-loss training can be unstable. A common strategy combines pixel-domain and frequency-domain objectives; however, low contrast, limited high-frequency content, and sensor-specific noise often make their gradients weakly aligned or conflicting. To address this optimization ambiguity, we propose Orthogonal Gradient Gaming and Frequency Rectification (OGG-FR), a plug-and-play optimization framework that decomposes the frequency gradient into a redundant parallel component and an orthogonal innovation component relative to the pixel gradient. In the conflict regime, OGG-FR computes a safe base gradient using the Multiple Gradient Descent Algorithm (MGDA) and adds a variance-rectified orthogonal innovation; in the compatible regime, it discards redundant parallel information and injects the orthogonal innovation according to a confidence score estimated from the high-frequency residual. Experimental results on the UAV thermal benchmark show broad gains under BI and BD degradations at ×4\times 4 and ×8\times 8 scales, while gradient analyses support the effectiveness of the proposed conflict-aware update rule.
Aug 4, 2026

FaithIR: Rethinking Infrared Image Super-Resolution from Perceptual Sharpness to Task Relevant Fidelity

Infrared image super-resolution (IISR) is important for downstream tasks such as object detection and semantic segmentation. Existing IISR methods often produce artificial textures, over-sharpened edges, and spurious high-frequency details that distort authentic thermal structures and semantic information. To address this issue, we propose FaithIR, a faithful infrared super-resolution framework for reliable machine perception. FaithIR consists of a patch-level conditioning branch that captures global thermal and structural information and a pixel-level restoration branch that performs dense local reconstruction under structural guidance. The entire restoration process is performed directly in the pixel domain to preserve infrared-specific structures and task-relevant information. Extensive experiments on FLIR-IISR, M3FD, and FMB demonstrate strong reconstruction fidelity, cross-dataset generalization, and superior performance in object detection and semantic segmentation. These results show that demonstrate that preserving faithful infrared structure preservations is more important for reliable machine perception than merely pursuing perceptual sharpness alone.
Jul 27, 2026

BeyondFusion: Self-Aligned Latent Diffusion for Calibration-Free Infrared Super-Resolution and Infrared-Visible Fusion

Mobile infrared-visible imaging typically pairs a compact infrared sensor with a high-resolution visible camera for complementary perception. While cross-sensor misalignment caused by different optics, viewpoints, fields of view, and exposure timings hinders practical deployment. In this paper, we propose BeyondFusion, a unified latent diffusion framework for calibration-free visible-guided infrared super-resolution and infrared-visible fusion tasks. The proposed framework supports both task-specific training and joint training where two tasks are optimized and executed as two readouts of the same generative process. Instead of relying on explicit registration or geometric warping, BeyondFusion introduces a cross-modal self-aligning (CMSA) module into the denoising U-Net. CMSA reorganizes infrared and visible latent tokens into a shared attention space to learn content-adaptive cross-modal correspondence during the denoising process. Together with misalignment augmentation module, the model is facilitated to exploit visible structural and semantic cues while preserving thermal consistency, enabling high-frequency infrared reconstruction and informative fused-image generation under uncalibrated conditions. Extensive experiments on public benchmarks and a mobile infrared-visible imaging system show strong performance across aligned inputs, low-resolution infrared observations, synthetic misalignments, and real mobile captures with unsynchronized sensors. Ablation studies, unified training analysis, and downstream pedestrian detection further validate the effectiveness of BeyondFusion for calibration-free multimodal imaging.
Jul 24, 2026

IR275K: A Benchmark for Infrared Multi-Frame Super-Resolution Toward Efficient Remote Sensing

Efficient processing is becoming increasingly important in infrared remote sensing, where satellite constellations produce large volumes of observations under constrained detector resolution, power, and downlink bandwidth. Multi-frame super-resolution (MFSR) offers a software-based route to spatial enhancement, but its evaluation in infrared sensing remains fragmented across private datasets and ad-hoc protocols. Existing benchmarks do not explicitly capture the thermal contrast, sensor noise, weak texture, and platform-induced frame-to-frame variation that characterize infrared video. We introduce IR275K, a curated benchmark containing 594 infrared video sequences and 275,196 frames. It provides sequence-level train/validation/test splits and a reproducible X4 evaluation protocol. As an initial architectural probe, we further evaluate CGMamba, a lightweight state-space model with 10.90M parameters and 112.14G FLOPs. CGMamba combines 2D rotary position encoding (2DRoPE) with center-guided cross-Mamba (CGCM) fusion for implicit multi-frame reconstruction. It achieves 33.19dB PSNR, outperforming infrared single-image super-resolution references by 0.35--0.52dB at substantially lower computational cost. Ablation results show that removing 2D~RoPE from CGCM causes a 1.53dB drop and severe grid-like artifacts. This indicates that explicit spatial anchoring is critical for stabilizing SSM-based cross-frame gating under infrared conditions. IR275K provides a reproducible foundation for accuracy--efficiency evaluation of infrared MFSR methods, while the architectural analysis offers a concrete starting point for spatially aware SSM design under resource-constrained infrared sensing. Dataset and evaluation resources are available at: https://github.com/InfraRecon7/IR275K.
Jul 23, 2026

Decoupling Cross-Modality Manifold Discrepancy: Leveraging Visible Diffusion Priors for Infrared Super-Resolution

Infrared image super-resolution (IISR) mitigates the limitations imposed by low spatial resolution. Existing methods have recognized that IISR should preserve consistency in global distribution and structural information while enhancing image clarity. However, these methods are either insufficient or overly intrusive, a problem that becomes even more pronounced in diffusion-based models. To address these issues, we propose a dual-path diffusion-based framework for IISR, termed Shift-IISR. The proposed method is designed to improve the consistency of IISR results while preserving the generative capacity of diffusion models. Specifically, we develop a Global Representation Modulation (GRM) module to extract modality-specific information from infrared imagery and guide the global distribution of the diffusion model toward the ground truth. In addition, we introduce a Local Structure Refinement (LSR) module to encourage the model to focus on structural information at each step of the iterative denoising process. Extensive experiments demonstrate that the proposed method effectively improves distributional and structural consistency while maintaining competitive super-resolution performance. The source code of the proposed Shift-IISR can be available at https://github.com/Assassink8/Shift-IISR.
Apr 23, 2026

The First Challenge on Remote Sensing Infrared Image Super-Resolution at NTIRE 2026: Benchmark Results and Method Overview

This paper presents the NTIRE 2026 Remote Sensing Infrared Image Super-Resolution (x4) Challenge, one of the associated challenges of NTIRE 2026. The challenge aims to recover high-resolution (HR) infrared images from low-resolution (LR) inputs generated through bicubic downsampling with a x4 scaling factor. The objective is to develop effective models or solutions that achieve state-of-the-art performance for infrared image SR in remote sensing scenarios. To reflect the characteristics of infrared data and practical application needs, the challenge adopts a single-track setting. A total of 115 participants registered for the competition, with 13 teams submitting valid entries. This report summarizes the challenge design, dataset, evaluation protocol, main results, and the representative methods of each team. The challenge serves as a benchmark to advance research in infrared image super-resolution and promote the development of effective solutions for real-world remote sensing applications.
Apr 11, 2026

Dual-Branch Remote Sensing Infrared Image Super-Resolution

Remote sensing infrared image super-resolution aims to recover sharper thermal observations from low-resolution inputs while preserving target contours, scene layout, and radiometric stability. Unlike visible-image super-resolution, thermal imagery is weakly textured and more sensitive to unstable local sharpening, which makes complementary local and global modeling especially important. This paper presents our solution to the NTIRE 2026 Infrared Image Super-Resolution Challenge, a dual-branch system that combines a HAT-L branch and a MambaIRv2-L branch. The inference pipeline applies test-time local conversion on HAT, eight-way self-ensemble on MambaIRv2, and fixed equal-weight image-space fusion. We report both the official challenge score and a reproducible evaluation on 12 synthetic times-four thermal samples derived from Caltech Aerial RGB-Thermal, on which the fused output outperforms either single branch in PSNR, SSIM, and the overall Score. The results suggest that infrared super-resolution benefits from explicit complementarity between locally strong transformer restoration and globally stable state-space modeling.
Mar 5, 2026

Toward Real-world Infrared Image Super-Resolution: A Unified Autoregressive Framework and Benchmark Dataset

Infrared image super-resolution (IISR) under real-world conditions is a practically significant yet rarely addressed task. Pioneering works are often trained and evaluated on simulated datasets or neglect the intrinsic differences between infrared and visible imaging. In practice, however, real infrared images are affected by coupled optical and sensing degradations that jointly deteriorate both structural sharpness and thermal fidelity. To address these challenges, we propose Real-IISR, a unified autoregressive framework for real-world IISR that progressively reconstructs fine-grained thermal structures and clear backgrounds in a scale-by-scale manner via thermal-structural guided visual autoregression. Specifically, a Thermal-Structural Guidance module encodes thermal priors to mitigate the mismatch between thermal radiation and structural edges. Since non-uniform degradations typically induce quantization bias, Real-IISR adopts a Condition-Adaptive Codebook that dynamically modulates discrete representations based on degradation-aware thermal priors. Also, a Thermal Order Consistency Loss enforces a monotonic relation between temperature and pixel intensity, ensuring relative brightness order rather than absolute values to maintain physical consistency under spatial misalignment and thermal drift. We build FLIR-IISR, a real-world IISR dataset with paired LR-HR infrared images acquired via automated focus variation and motion-induced blur. Extensive experiments demonstrate the promising performance of Real-IISR, providing a unified foundation for real-world IISR and benchmarking. The dataset and code are available at: https://github.com/JZD151/Real-IISR.
Feb 17, 2026

RPT-SR: Regional Prior attention Transformer for infrared image Super-Resolution

General-purpose super-resolution models, particularly Vision Transformers, have achieved remarkable success but exhibit fundamental inefficiencies in common infrared imaging scenarios like surveillance and autonomous driving, which operate from fixed or nearly-static viewpoints. These models fail to exploit the strong, persistent spatial priors inherent in such scenes, leading to redundant learning and suboptimal performance. To address this, we propose the Regional Prior attention Transformer for infrared image Super-Resolution (RPT-SR), a novel architecture that explicitly encodes scene layout information into the attention mechanism. Our core contribution is a dual-token framework that fuses (1) learnable, regional prior tokens, which act as a persistent memory for the scene's global structure, with (2) local tokens that capture the frame-specific content of the current input. By utilizing these tokens into an attention, our model allows the priors to dynamically modulate the local reconstruction process. Extensive experiments validate our approach. While most prior works focus on a single infrared band, we demonstrate the broad applicability and versatility of RPT-SR by establishing new state-of-the-art performance across diverse datasets covering both Long-Wave (LWIR) and Short-Wave (SWIR) spectra