Self-Supervised Image Denoising

Noise2Noise (N2N) trains denoisers on pairs of independently corrupted observations, eliminating clean references. We stress-test two natural conjectures about why the L1 loss outperforms L2 here. First, the hypothesis that the L1 loss confers robustness via parameter sparsity confuses the loss with Lasso regularization: an explicit Lasso penalty produces the predicted sparsity yet fails to reproduce L1's cross-noise behavior, while L1- and L2-trained weight distributions are indistinguishable. Second, the population optima of the two losses coincide exactly for symmetric signal posteriors and nearly so for concentrated ones. Measured differences are therefore dominated by optimization dynamics (bounded-influence gradients), which we probe with gradient statistics and contaminated-target training. On Kodak24 with five synthetic noise families, the L1 loss holds a statistically significant edge over L2, below 1 dB PSNR, holding across three seeds on 13 of the 14 noise columns. On real camera noise the loss is not the decisive variable in distribution: on official SIDD validation blocks, synthetic-Gaussian-trained N2N models gain only 0.8 to 3.7 dB over the noisy input regardless of loss, while retraining on SIDD's own noisy pairs, never reading ground truth, gains 9.4 to 11.0 dB, far ahead of BM3D. All metrics are on raw network outputs, and the study makes no leaderboard claim. The training pair distribution, not the loss, carries the inductive bias. That design rule applies wherever clean references are unobtainable, from microscopy to industrial inspection sensors.

Low-dose computed tomography (LDCT) measurements contain mixed Poisson-Gaussian noise. However, most self-supervised methods rely on generic image statistics and do not explicitly model this noise, which may limit their ability to effectively suppress realistic LDCT noise. To address this issue, we propose a physics-driven framework with cross-domain iteration for self-supervised LDCT denoising. The proposed framework proceeds in three main steps. First, a learned sinogram prior and the LDCT noise model guide posterior inference of photon counts, enabling separation of the Poisson and Gaussian components. Second, the separated Poisson and Gaussian components are respectively processed by binomial thinning and Gaussian data thinning to construct two branches, and residual scaling matches each branch's noise level to that of the observation, yielding a training pair with approximately independent noise realizations from one low-dose measurement. Finally, the pair is used to train an image-domain network whose forward-projected outputs update the prior. Through cross-domain iteration, the prior and the training pair are progressively refined while maintaining consistency with CT acquisition physics. Experiments on simulated data from AAPM, LIDC-IDRI, and LoDoPaB-CT and on real LDCT data show consistent gains over the evaluated self-supervised baselines across dose levels, with performance comparable to the evaluated supervised baseline.

Single-image self-supervised denoising replaces unavailable clean targets with surrogate targets constructed from noisy observations. Its effectiveness therefore depends on how closely the surrogate objective remains aligned with supervised denoising, especially when noise is correlated, spatially nonstationary, or unknown. We express the discrepancy between a broad class of MSE-based self-supervised objectives and supervised MSE as a parameter-independent constant and a trace interaction between the surrogate-target residual and the prediction error. The corresponding gradient discrepancy is determined by the gradient of this interaction. This formulation provides a common view of paired-noise, blind-spot, weak-noise, re-corruption, and sub-image methods, while revealing that a small global interaction may conceal substantial positive and negative regional interactions through spatial cancellation. Building on these observations, we propose LoTA-N2N, a two-stage zero-shot adaptation framework. Stage 1 trains a denoiser on complementary sub-image pairs and freezes it to construct detached clean-sub-image proxies. Stage 2 estimates the residual--prediction interaction using these proxies and suppresses its patch-wise absolute magnitude. We show that the local construction prevents spatial cancellation and upper-bounds the magnitude of the corresponding global interaction. Experiments across natural, confocal, and X-ray images, complemented by iteration-matched controls, controlled noise shifts, and gradient diagnostics, show consistent gains over MSE-only adaptation under IID, spatially varying, and mixed noise. Overall, LoTA-N2N demonstrates that estimated local interaction and spatial cancellation control provide effective design principles for single-image self-supervised denoising without paired clean targets, repeated acquisitions, or a predefined re-corruption model.

This paper documents the implementation and evaluation of a self-supervised denoising framework on Inertial Confinement Fusion (ICF) images corrupted by Multiplicative Uniform noise: the \emph{Log-Domain Noisier2Inverse} framework. This framework is developed and analysed in this work; the key theoretical result -- that minimising the log-domain self-supervised loss is equivalent to supervised learning in the transformed domain -- is presented with full proof. We document significant implementation challenges arising from the unique characteristics of ICF imagery, describe the fixes applied at each stage, and report final quantitative results. The log-domain approach with per-image JSON Uniform noise loading (VariantB) achieves the best result: a mean PSNR of $21.41\db$ and SSIM of $0.8358$, a $+19.46\db$ improvement over the noisy input baseline of $1.95\db$, substantially outperforming BM3D log-domain ($4.47\db$, SSIM $0.5181$) and Noise2Self ($4.75\db$, SSIM $0.0177$). VariantA, using fixed Gaussian noise loading, achieves $21.39\db$ PSNR and SSIM $0.8436$. Of the three evaluated methods, Log-Domain Noisier2Inverse and Noise2Self are entirely self-supervised during training, requiring no clean ground truth data; BM3D is a classical filter-based method requiring no training at all. The clean reference images are used solely for quantitative evaluation of all three methods.

Neighboring-slice self-supervised denoising is attractive for volumetric medical imaging, yet inter-slice misalignment breaks anatomical correspondence and often yields ghosting and blurred margins when adjacent slices are used naively as targets. We propose Neighbor-Guided Patch Sampling (NGPS), a lightweight framework that constructs neighboring supervision under local inter-slice misalignment without explicit registration. To avoid learning from misleading targets, prior methods commonly mask discrepant regions, but this stabilizes training at the cost of leaving a non-trivial portion of neighboring evidence unexploited, particularly around high-frequency anatomical boundaries. NGPS addresses this by decoupling structure matching from signal retrieval: for each masked location, it searches a local neighborhood for structurally similar candidate patches using a simple guide image (e.g., fast bilateral filtering), while retrieving the supervision signal directly from the raw noisy neighbor at the matched coordinates. By matching on a noise-attenuated guide while retrieving raw values from neighboring slices, NGPS constructs local pseudo targets without a learned registration module. Across the evaluated CT and synthetic-Rician MRI settings, NGPS improves fidelity and structure-sensitive metrics. Code is available at https://github.com/cv-cho/NGPS .

This letter introduces a physics-informed self-supervised framework for sonar image despeckling that reformulates despeckling as residual consistency in the homomorphic log domain. By constraining the log-ratio residual to obey multiplicative speckle statistics, the proposed method eliminates the need for clean supervision while preventing degenerate identity solutions. A variance-targeted statistical loss combined with edge-aware structural regularization and median-guided curriculum stabilization enables effective speckle suppression with preserved structural fidelity. This formulation along with a lightweight neural network achieves state-of-the-art performance across multiple real sonar datasets and demonstrates excellent cross-dataset robustness, while remaining suitable for real-time deployment.

The inherent electronic and speckle noise complicates clinical interpretation of ultrasound images. Conventional denoising methods rely on explicit noise assumptions whose validity diminishes under composite noise conditions. Learning-based methods are usually pretrained in a limited image domain using a labeled dataset, which implies inevitable domain shift in complex in vivo environments. This study proposes a Pyramid Self-Contrastive Learning (PSCL) framework for test-time ultrasound image denoising without pretraining. Given multiple noisy samples from only one-shot imaging, PSCL disentangles anatomical similarity and noise randomness into separate pyramid latent spaces. The clean image is then decoded from the anatomy space while discarding the noise space. We first apply PSCL to synthetic aperture ultrasound (SAU), where an Aperture-to-Aperture loop serves as a self-supervised proxy task to ensure denoising fidelity. Simulation experiments, including noise levels from 0 to 30 dB and inclusion geometries from simple to complex, demonstrated improvements of 69.3% in SNR and 34.4% in CNR. The in vivo results showed 84.8% SNR and 25.7% CNR gains using only two aperture data of the heart in six echocardiographic views, liver, and kidney. PSCL delivers clear images across diverse imaging targets and configurations, paving the way for more reliable anatomical visualization without domain shift and pretraining costs.

Self-supervised learning (SSL) has emerged as a promising approach to seismic data denoising as it does not require clean reference data. In this work, the deployment of the Noisy-as-Clean (NaC) method was evaluated for real seismic data denoising under controlled conditions. Two independent seismic acquisitions, each comprising noisy and filtered data, were organized into four real datasets. The NaC SSL method was adapted to add real noise to the noisy input, controlled by a parameter. An experimental protocol with ten experiments was designed to compare different strategies for deploying the NaC SSL method with the supervised learning baseline, using identical network topology and hyperparameters. The models were evaluated in terms of denoising performance, computational cost, and generalization capability. The results show that the synthetic additive white Gaussian noise (AWGN) is inadequate for the denoising of seismic data within the NaC method, and performance strongly depends on the compatibility between the injected and actual noise characteristics. Furthermore, both the characteristics of the seismic data and the noise level influence the performance of the model. Self-supervised fine-tuning on test data has improved SSL performance, whereas no such gain was observed for fine-tuning of supervised models. Finally, NaC has shown to be a simple, effective, and model-independent method that offers a feasible solution for the denoising of real seismic data.

Despite extensive research on computed tomography (CT) denoising, few studies exploit projection-domain data characteristics to mitigate noise correlation. To bridge this gap, this work proposes FrequencyCT, the first zero-shot self-supervised method for pseudo-sample generation in the frequency domain for low-dose CT denoising. Specifically, by exploiting the distinct frequency-domain distributions of noise and true signal, a regional low-frequency anchoring technique is proposed. Applying phase-preserving noise and mask perturbations to the high-frequency region generates pseudo-samples for self-supervision. Driven by the exponential correlation between noise variance of noisy projections and the underlying true signal, consistent data truncation is applied to the generated samples to stabilize optimization gradients. Evaluation results on multiple public and real datasets confirm the clinical application potential of this research, which provides an innovative perspective for the field of denoising. The code is available at: https://github.com/yqx7150/FrequencyCT.

Denoising wearable electroencephalogram (EEG) is inherently challenging since neural activity is not only subtle but also inseparable from spectrally overlapping noise artifacts. Classical signal processing methods, relying on fixed or heuristic rules, cannot handle the time-varying pervasive artifacts in wearable EEGs. Deep learning methods, on the other hand, show promise in decomposition-free EEG denoising using highly expressive neural networks, but the training requires artifact-free EEG, which is inherently unobtainable. To address this, we propose Intelligent Partitioning for Self-supervised Denoising (iPSD). Our method eliminates the need for clean references by learning to partition an input EEG segment into independent noisy realizations with the same underlying signal. This enables self-supervision of deep learning denoisers, even in zero-shot settings where only a single EEG segment to be denoised is available. We validate iPSD through extensive experiments, including validations on wearable EEG from in-ear sensors. The results show that iPSD achieves state-of-the-art performance, most notably under extremely low signal-to-noise ratios (down to -10 dB) and challenging artifacts (e.g., EMG), with spectral fidelity orders of magnitude higher than competitive baselines.

Propagation-based X-ray phase-contrast imaging (PBI) enables high-contrast visualization of lung structures and holds strong medical potential. However, safe translation to the clinic will require a substantial radiation dose reduction, which inevitably increases image noise. Supervised convolutional-neural-network-based denoising can restore image quality but depends on paired low- and high-dose datasets, which are rarely available in practice. Self-supervised methods avoid this limitation, yet most are not well adapted to the inverse problem of PBI computed tomography (CT). We introduce Neighbor2Inverse, a self-supervised denoising framework designed for low-dose PBI-CT that generalizes to clinical CT. Building on the Neighbor2Neighbor principle, each noisy projection is subsampled into two variants that preserve structural information but contain independent noise realizations. These are reconstructed separately, and the resulting pairs are used to train a denoising network directly in the image domain. We benchmark the proposed method against established analytical and self-supervised denoising approaches. In region-of-interest PBI CT experiments, Neighbor2Inverse achieves superior noise suppression while preserving fine structural details, as demonstrated by improved contrast-to-noise ratio, spatial resolution, and composite image quality metrics. Competitive performance is also observed on clinical CT data under simulated low-dose conditions. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. Code, data, and interactive figures are available at https://github.com/J-3TO/Neighbor2Inverse.

In astronomical imaging, the low photon count of exposures necessitates extensive post-processing steps, including contamination removal and denoising. This paper evaluates deep-learning denoising methods that can be trained without clean ground-truth images and assesses their utility for detection11 oriented analysis of astronomical data. We adapt and compare Noise2Noise, Stein's Unbiased Risk Estimator, and blind-spot-based methods using synthetic data and real observations from the Hubble Space Telescope (HST) and the Canada-France-Hawaii Telescope (CFHT). Performance is evaluated using object-detection metrics, including correct detection rate and false alarm rate, together with image-based metrics and pixel-distribution diagnostics. The results show that these methods can improve faint-source detectability relative to the original noisy images, with encouraging gains on HST data after domain-consistent initialization, while transfer to CFHT data is more limited, highlighting the importance of instrument/domain similarity for unsupervised adaptation.

Self-supervised image denoising methods have traditionally relied on architectural constraints, pseudo-pair constructions, or specialized loss functions to avoid the trivial identity mapping. Among these, approaches such as Noisier2Noise or R2R create training pairs by adding synthetic noise to noisy images. While effective, these recorruption-based approaches require precise knowledge of the noise distribution, which is often unavailable. We present Learning to Recorrupt (L2R), a self-supervised framework that does not require exact knowledge of the noise distribution. Our method introduces a learnable recorruptor jointly optimized with the denoiser through a min--max saddle-point objective. The proposed method achieves state-of-the-art performance among methods without prior knowledge of the noise distribution across unconventional and heavy-tailed noise distributions, such as log-gamma and Laplace, as well as spatially correlated noise, while obtaining competitive results on real-world denoising benchmarks characterized by signal-dependent noise.