Wireless Localization

Localization in 5G and 6G networks is essential for important use cases such as intelligent transportation, smart factories, and smart cities. Although deep learning has enabled improving localization accuracy, depending on the deployment scenario and the effort required for dataset collection campaigns on a given infrastructure, the training process for localization models can vary significantly. Furthermore, with respect to feature selection, recent works have demonstrated the robustness of angle-of-arrival (AoA) based localization. In view of these two points, we propose an adaptive framework for AoA-based localization that consists of two alternative learning strategies, each suited either for large or small training datasets. The proposed framework is evaluated on a real, massive multiple input multiple output (mMIMO) orthogonal frequency division multiplexing (OFDM) outdoor channel state information (CSI) dataset. First, we investigate offline learning when large training datasets are available; we propose a hierarchical framework that first distinguishes between line of sight (LoS) and non line of sight (NLoS) regions and then moves to more fine grained localization in the respective region. This approach provides high-performance localization through accumulated batch retraining and an integrated hyperparameter optimization mechanism. Second, when only a small training dataset is available, an online learning framework is proposed, using incremental tree-based and ensemble-based models for handling streaming data and continuously updating mode, as well as an online few-shot learning model for rapidly initializing new classes from a limited labeled support set. These results showcase that highly accurate robust localization can be achieved incrementally during network operation by exploiting online learning, alleviating the need for large dataset collection campaigns.

Mobile robots that move between outdoor and indoor environments still struggle with consistent positioning. Satellite-based and terrestrial ranging each work well in their home domains, but combining them at the raw measurement level has received little attention, and the building boundary is precisely where both classes degrade. This paper reports preliminary observations from the HYMN dataset, which time-synchronizes raw measurements from GNSS, Ultra-Wideband (UWB), WiFi Fine Time Measurement (FTM), and Bluetooth Low Energy (BLE) against millimeter-level ground truth in an industrial setting. Per-zone measurement availability and ranging-residual behavior are characterised. The two technology classes turn out to be complementary, and the indoor-outdoor transition is where their weaknesses overlap. The dataset is publicly available.

Wireless localization of permanent magnets enables occlusion-free guidance for medical interventions, yet its practical accuracy is fundamentally limited by two coupled challenges: the poor observability of conventional planar sensor arrays and the simulation-to-reality (Sim-to-Real) gap of learning-based estimators. To address these issues, this article presents a unified framework that combines information-theoretic sensor geometry optimization with physics-aware deep learning. First, a rigorous Fisher Information Matrix (FIM)-based evaluation framework is established to quantify geometry-induced observability limitations. The results show that a staggered split-array topology provides a substantially stronger observability foundation for localization while remaining compatible with practical external deployment. Second, building on this optimized sensing configuration, we propose Phy-GAANet, a calibration-free estimator trained entirely on hardware-aware synthetic data. By incorporating Physics-Informed Features (PIF) for saturation modeling and Geometry-Aware Attention (GAA) for preserving cross-layer vector structure, the network effectively bridges the Sim-to-Real gap. Extensive real-world experiments demonstrate state-of-the-art performance, achieving a position error of 1.84 mm and an orientation error of 3.18 degrees at a refresh rate exceeding 270 Hz. The proposed method consistently outperforms classical Levenberg--Marquardt solvers and generic convolutional baselines, particularly in suppressing catastrophic outliers and maintaining robustness in challenging near-field boundary regions. Beyond the proposed network, the FIM-guided analysis also provides a framework for sensor geometry design in magnetic localization systems under practical deployment constraints.

Fixed Radius Near Neighbor (FRNN) search is an alternative to the widely used k Nearest Neighbors (kNN) search. Unlike kNN, FRNN determines a label or an estimate for a test sample based on all training samples within a predefined distance. While this approach is beneficial in certain scenarios, assuming a fixed maximum distance for all training samples can decrease the accuracy of the FRNN. Therefore, in this paper we propose the Adaptive Radius Near Neighbor (ARNN) and the Weighted ARNN (WARNN), which employ adaptive distances and in latter case weights. All three methods are compared to kNN and twelve of its variants for a regression problem, namely WiFi fingerprinting indoor positioning, using 22 different datasets to provide a comprehensive analysis. While the performances of the tested FRNN and ARNN versions were amongst the worse, three of the four best methods in the test were WARNN versions, indicating that using weights together with adaptive distances achieves performance comparable or even better than kNN variants.

Visual-inertial odometry (VIO) is widely used for mobile robot localization, but its long-term accuracy degrades without global constraints. Incorporating ranging sensors such as ultra-wideband (UWB) can mitigate drift; however, high-accuracy ranging usually requires well-deployed anchors, which is difficult to ensure in narrow or low-power environments. Moreover, most existing visual-inertial-ranging (VIR) fusion methods rely on discrete time-based filtering or optimization, making it difficult to balance positioning accuracy, trajectory consistency, and fusion efficiency under asynchronous multi-sensor sampling. To address these issues, we propose a spline-based continuous-time state estimation method for VIR fusion localization. In the preprocessing stage, VIO motion priors and UWB ranging measurements are used to construct virtual anchors and reject outliers, thereby alleviating geometric degeneration and improving range reliability. In the estimation stage, the pose trajectory is parameterized in continuous time using a B-spline, while inertial, visual, and ranging constraints are formulated as factors in a sliding-window graph. The spline control points, together with a small set of auxiliary parameters, are then jointly optimized to obtain a continuous-time trajectory estimate. Evaluations on public datasets and real-world experiments demonstrate the effectiveness and practical potential of the proposed approach.

Radio frequency (RF)-based indoor localization offers significant promise for applications such as indoor navigation, augmented reality, and pervasive computing. While deep learning has greatly enhanced localization accuracy and robustness, existing localization models still face major challenges in cross-scene generalization due to their reliance on scene-specific labeled data. To address this, we introduce Radiance-Field Reinforced Pretraining (RFRP). This novel self-supervised pretraining framework couples a large localization model (LM) with a neural radio-frequency radiance field (RF-NeRF) in an asymmetrical autoencoder architecture. In this design, the LM encodes received RF spectra into latent, position-relevant representations, while the RF-NeRF decodes them to reconstruct the original spectra. This alignment between input and output enables effective representation learning using large-scale, unlabeled RF data, which can be collected continuously with minimal effort. To this end, we collected RF samples at 7,327,321 positions across 100 diverse scenes using four common wireless technologies--RFID, BLE, WiFi, and IIoT. Data from 75 scenes were used for training, and the remaining 25 for evaluation. Experimental results show that the RFRP-pretrained LM reduces localization error by over 40% compared to non-pretrained models and by 21% compared to those pretrained using supervised learning.

Machine learning has greatly advanced data-driven channel modeling and resource optimization. However, most existing methods require accurately location-labeled datasets, which are costly to collect and maintain in dynamic environments. This paper develops a self-localizing multiple-input multiple-output (MIMO) beam map framework that constructs a hierarchical wireless memory from highly sparse channel state information (CSI) measurements without explicit location labels. To reduce acquisition and processing overhead, we use beamdomain received signal strength (RSS) as compact inputs and theoretically show that they enable asymptotically unbiased spatial signature estimation. A dual-scale extractor captures intrasnapshot angular dependencies and inter-sample correlations for incomplete observations, and a hybrid temporal encoder is designed to consolidate recent CSI into stable short-term context for physical anchor inference. The inferred anchors spatially index a physically structured radio map embedding that stores long-term channel knowledge, which conditions a diffusion decoder for location-consistent full CSI reconstruction. Such a radio map embedding provides a persistent wireless knowledge representation that can be continuously updated and reused without full CSI acquisition. Experiments show that the proposed framework improves physical-anchor recovery accuracy by over 30% under sparse measurements and achieves more than 20% channel-capacity gain in non-line-of-sight (NLOS) beam tracking over Kalman-filter-based methods.

Indoor positioning systems (IPSs) are increasingly vital for location-based services in complex multi-storey environments. This study proposes a novel graph-based approach for floor separation using Wi-Fi fingerprint trajectories, addressing the challenge of vertical localization in indoor settings. We construct a graph where nodes represent Wi-Fi fingerprints, and edges are weighted by signal similarity and contextual transitions. Node2Vec is employed to generate low-dimensional embeddings, which are subsequently clustered using K-means to identify distinct floors. Evaluated on the Huawei University Challenge 2021 dataset, our method outperforms traditional community detection algorithms, achieving an accuracy of 68.97%, an F1- score of 61.99%, and an Adjusted Rand Index of 57.19%. By publicly releasing the preprocessed dataset and implementation code, this work contributes to advancing research in indoor positioning. The proposed approach demonstrates robustness to signal noise and architectural complexities, offering a scalable solution for floor-level localization.