Programming a robot arm requires users to interpret coordinate frames, joint rotations, and trajectories that are not directly visible. Augmented reality (AR) can make these spatial relations visible, but its benefits may depend on users' spatial ability. We conducted a randomized between-subjects experiment (N=71) in which participants learned to program a physical UR5e robot using either conventional teach-pendant controls with PDF instructions or a head-mounted AR interface that displayed joints, coordinate frames, and waypoints. We measured users' spatial ability with the Mental Rotation Test and assessed subjective cognitive load and system usability. Overall, AR did not significantly improve cognitive load or usability compared with conventional instruction. However, exploratory analyses revealed a compensatory effect: spatial ability predicted higher usability and lower extraneous cognitive load in the control group, but not in the AR condition, suggesting AR mitigated the disadvantage typically faced by users with lower spatial ability. These findings point to a compensatory function of AR that should be explored to guide the design of personalized AR interfaces for human-robot interaction.
The integration of augmented reality (AR) and EEG-based brain-computer interfaces (BCIs) offers a promising path for enabling intuitive control of robots for assistive purposes. However, existing AR brain-robot interface (BRI) systems are often constrained to task-specific structures, limiting their utility in real-world environments. We present an AR BRI designed for generalist robot arm manipulation that combines gaze-based object selection with motor imagery action control. Our system uses eye-tracking for intuitive object targeting and context-aware visual overlays ("Place" and "Use") to guide the user through tasks within a shared autonomy framework. We evaluated the interface through a feasibility study with 18 healthy participants performing three multi-step activities of daily living: drinking, using a drawer, and operating an oven. Our results demonstrate that this interaction paradigm enables effective sequential task execution and high user engagement, achieving a "Good" usability rating (SUS > 70). These findings support the feasibility of the proposed interaction paradigm for complex BCI-driven robotic assistance, and motivate future evaluation with the intended target population. Project website: https://ar-bri-manip.github.io/.
Teleoperation for contact-rich manipulation remains challenging, especially when using low-cost, motion-only interfaces that provide no haptic feedback. Virtual reality controllers enable intuitive motion control but do not allow operators to directly perceive or regulate contact forces, limiting task performance. To address this, we propose an augmented reality (AR) visualization of the impedance controller's target pose and its displacement from each robot end effector. This visualization conveys the forces generated by the controller, providing operators with intuitive, real-time feedback without expensive haptic hardware. We evaluate the design in a dual-arm manipulation study with 17 participants who repeatedly reposition a box with and without the AR visualization. Results show that AR visualization reduces completion time by 24% for force-critical lifting tasks, with no significant effect on sliding tasks where precise force control is less critical. These findings indicate that making the impedance target visible through AR is a viable approach to improve human-robot interaction for contact-rich teleoperation.
Human-robot collaboration (HRC) often requires robot intentions and internal states to be conveyed to users for task efficiency and safety. Recently, augmented reality (AR) situated analytics provide such real-time robot feedback in HRC contexts. However, AR situated analytics can obstruct important real-world elements, posing safety and usability risks, especially when content is dynamically positioned relative to movements of mobile robots in a warehouse HRC scenario. In this paper, we introduce the Augmented Reality Technique Of Obstruction Deterrence while Aiding Robotic Teaming for Users (ARTOO-DARTU), an AR system tailored specifically for warehouse HRC that enables real-time robot situated analytics and control while preserving visibility of the real world through an obstruction detection and mitigation pipeline (ODM) that is uniquely suited for AR-HRC. To evaluate ARTOO-DARTU, we developed Pocket MonstARs, a controlled gamified abstraction of HRC warehouse inventory picking in which virtual monsters serve as proxies for pick targets, while labeled and object-marked boxes preserve the real-world identification demands of the picking task. In a 34-participant user study, we found that our designed AR situated analytics yielded a 46% increase in efficiency on the overall HRC task, but only when the ODM was active. Participants with the ODM active were also 61% faster on subtasks requiring visibility of the real world. Our findings demonstrate that, when paired with our developed ODM to prevent real-world obstructions, the situated analytics in ARTOO-DARTU can significantly enhance efficiency and user experience in AR-HRC warehouse scenarios.