Data-Driven Supervision of a Thermal-Hydraulic Process Towards a Physics-Based Digital Twin

Digital Twins rely on surrogate models to mirror physical systems in real time, yet these models can degrade as operating conditions evolve, a phenomenon known as concept drift. Maintaining surrogate fidelity under drift, particularly when models must also capture aleatoric uncertainty, remains an open challenge. Existing adaptive frameworks lack principled mechanisms for detecting when updates are needed, for efficiently adapting models from limited streaming data, and for certifying that updates genuinely improve predictive performance. Here we present an adaptive Digital Twin framework that integrates a Fisher score--based multivariate drift detector, Low-Rank Adaptation (LoRA) for parameter-efficient continual learning, and a Mann--Whitney $U$ test for online statistical validation. The framework monitors surrogate-model confidence via Fisher score vectors, triggers targeted fine-tuning of fewer than 1% of model parameters upon drift detection, and statistically certifies predictive improvement before deploying the updated surrogate. Applied to a stochastic linear system and a directed energy deposition additive manufacturing process as case studies, the framework successfully detects distributional shifts with short delays and restores both predictive accuracy and uncertainty quantification under abrupt and incremental drift. These results establish a statistically rigorous and computationally tractable pathway for sustaining the trustworthiness of neural-network--based Digital Twins throughout their operational life cycle.

Real-time supervisory control of thermal energy distribution systems requires digital twins that are accurate, interpretable, and uncertainty-aware, yet remain data and computationally efficient. High-fidelity simulations alone are costly, while purely data-driven surrogates often lack robustness. To address these challenges, this work proposes an active learning (AL) framework that couples system-level Modelica simulations with four simpler physics-informed and data-driven surrogate modeling approaches: deterministic Sparse Identification of Nonlinear Dynamics with Control (SINDyC), its probabilistic multivariate-Gaussian extension (MvG-SINDyC), feedforward neural network (FNN), and gated recurrent unit (GRU) network. Tailored to each surrogate, model-specific AL query strategies are employed, including Mahalanobis-distance sampling in coefficient space for MvG-SINDyC and error-based sampling in prediction space for SINDyC, FNN, and GRU, allowing the learning process to prioritize dynamically informative trajectories. The proposed approach is demonstrated on the glycol heat exchanger (GHX) subsystem of the Thermal Energy Distribution System (TEDS) at Idaho National Laboratory. Across key GHX outputs--the bypass mass flow rate $\dot{m}_{\mathrm{GHX}}$ and heat transfer rate $Q_{\mathrm{GHX}}$-the AL framework achieves comparable predictive accuracy using as few as one-fifth of the simulation trajectories required by random sampling. Among the evaluated surrogates, the GRU achieves the highest predictive fidelity, while SINDyC remains the most computationally efficient and interpretable. The probabilistic MvG-SINDyC surrogate further enables uncertainty quantification and exhibits the largest computational gains under AL.

Process twins provide real-time representations of entire production processes. By capturing how process steps interact, rather than monitoring a single machine in isolation as an asset-based digital twin does, they have the potential to drive efficiency gains across the whole process. However, developing a process twin is costly. It requires accurately modelling the entire production process: its process steps, the equipment and product-specific settings each step uses, and its process variations. The resulting model must then be bound to live operational data. We present FacProcessTwin, a system that leverages a large language model (LLM) to reduce this development time, building a process twin from a plant's process documentation and natural-language input from an operator. FacProcessTwin generates this complete process model and then automatically binds its process steps to live operational data. The generated model and its data bindings are rendered as an interactive process diagram through which manufacturing personnel can monitor and correct the system's autonomous decisions, such as resolving uncertainty at safety-critical binding steps. We evaluate FacProcessTwin through a real-world case study of an Australian food manufacturer, covering 16 production process flows that span chilled, frozen, and aseptic shelf-stable product categories and include process variations within the same product. The results show that FacProcessTwin generates these process models accurately (a mean F1 of 95.2% against ground truth) and builds each twin in roughly a sixth of the manual time. Its human-in-the-loop governance then keeps the safety-critical bindings correct: at ambiguous tags where a single-pass baseline silently mis-binds 75.0% of the time, FacProcessTwin defers to the operator and mis-binds none.