TacDexGrasp: Compliant and Robust Dexterous Grasping with Tactile Feedback

We build a low-level reflex control layer driven by fast tactile feedback for multifinger grasp stabilization. Our hybrid approach combines learned tactile slip detection with model-based internal-force control to halt in-hand slip while preserving the object-level wrench. The multimodal tactile stack integrates piezoelectric sensing (PzE) for fast slip cues and piezoresistive arrays (PzR) for contact localization, enabling online construction of a contact-centric grasp representation without prior object knowledge. Experiments demonstrate reactive stabilization of multifingered grasps under external perturbations, without explicit friction models or direct force sensing. In controlled trials, slip onset is detected after 20.4 +/- 6 ms. The framework yields a theoretical grasp response latency on the order of 30 ms, with grasp-model updates in less than 5 ms and internal-force selection in about 4 ms. The analysis supports the feasibility of sub-50 ms tactile-driven grasp responses, aligned with human reflex baselines.

Regulating grasping force to reduce slippage during dynamic object interaction remains a fundamental challenge in robotic manipulation, especially when objects are manipulated by multiple rolling contacts, have unknown properties (such as mass or surface conditions), and when external sensing is unreliable. In contrast, humans can quickly regulate grasping force by touch, even without visual cues. Inspired by this ability, we aim to enable robotic hands to rapidly explore objects and learn tactile-driven grasping force control under motion and limited sensing. We propose a physics-informed energy abstraction that models the object as a virtual energy container. The inconsistency between the fingers' applied power and the object's retained energy provides a physically grounded signal for inferring slip-aware stability. Building on this abstraction, we employ model-based learning and planning to efficiently model energy dynamics from tactile sensing and perform real-time grasping force optimization. Experiments in both simulation and hardware demonstrate that our method can learn grasping force control from scratch within minutes, effectively reduce slippage, and extend grasp duration across diverse motion-object pairs, all without relying on external sensing or prior object knowledge. (Video: https://youtu.be/l3TJV29Mo6w)

Humans can grasp everyday objects with almost perfect success rates using fingertip tactile feedback, yet much of the robotic grasping literature emphasizes vision-based grasp selection with parallel grippers. In this work, we systematically investigate how high-resolution, dynamic tactile sensing contributes to grasp stability prediction and model-guided grasping in dexterous robotic hands. To this end, we collected a dataset of 10,000 grasp trials across 200 objects using a multi-fingered robotic hand equipped with four Digit 360 tactile sensors, recording external vision, proprioception, and tactile streams throughout each grasp. With this dataset, we trained end-to-end temporal multimodal models to predict post-lift stability from pre-lift grasp observations and compared sensing modalities and encoding backbones. Experimental results and controlled input ablations show that incorporating touch, and particularly high-resolution, dynamic touch, improves grasp stability prediction. Finally, we deployed the learned predictor as an online stability gate on the real robot, where visuo-tactile model-guided regrasping improved the success rate among executed lifts by 10.5 percentage points over a non-tactile gate. These results show how rich fingertip sensing and expressive temporal models that capture the dynamics of touch can support learned grasping with multi-fingered hands without explicit contact or force modeling, providing a scalable data-driven path from tactile experience toward stable dexterous manipulation. The dataset is publicly available at https://lasr-lab.github.io/dexterous-grasp-stability/.