Selective Transfer Learning of Cross-Modality Distillation for Monocular 3D Object Detection

Multi-view 3D detection with bird's eye view (BEV) is crucial for autonomous driving and robotics, but its robustness in real-world is limited as it struggles to predict accurate depth values. A mainstream solution, cross-modal distillation, transfers depth information from LiDAR to camera models but also unintentionally transfers depth-irrelevant information (e.g. LiDAR density). To mitigate this issue, we propose RayD3D, which transfers crucial depth knowledge along the ray: a line projecting from the camera to true location of an object. It is based on the fundamental imaging principle that predicted location of this object can only vary along this ray, which is finally determined by predicted depth value. Therefore, distilling along the ray enables more effective depth information transfer. More specifically, we design two ray-based distillation modules. Ray-based Contrastive Distillation (RCD) incorporates contrastive learning into distillation by sampling along the ray to learn how LiDAR accurately locates objects. Ray-based Weighted Distillation (RWD) adaptively adjusts distillation weight based on the ray to minimize the interference of depth-irrelevant information in LiDAR. For validation, we widely apply RayD3D into three representative types of BEV-based models, including BEVDet, BEVDepth4D, and BEVFormer. Our method is trained on clean NuScenes, and tested on both clean NuScenes and RoboBEV with a variety types of data corruptions. Our method significantly improves the robustness of all the three base models in all scenarios without increasing inference costs, and achieves the best when compared to recently released multi-view and distillation models.

Real-time monocular 3D object detection remains challenging due to severe depth ambiguity, viewpoint shifts, and the high computational cost of 3D reasoning. Existing approaches either rely on LiDAR or geometric priors to compensate for missing depth or sacrifice efficiency to achieve competitive accuracy. We introduce LeAD-M3D, a monocular 3D detector that achieves state-of-the-art accuracy and real-time inference without extra modalities. Our method is enabled by three key components. Asymmetric Augmentation Denoising Distillation (A2D2) transfers geometric knowledge from a clean-image teacher to a MixUp-noised student via a quality- and importance-weighted depth-feature loss, enabling stronger depth reasoning without LiDAR. 3D-aware Consistent Matching (CM$_{\text{3D}}$) improves prediction-to-ground truth assignment by integrating 3D MGIoU into the matching score, yielding stable and precise supervision. Finally, Confidence-Gated 3D Inference (CGI$_{\text{3D}}$) accelerates inference by restricting expensive 3D regression to confident regions. Together, these contributions set a new Pareto frontier for monocular 3D detection: LeAD-M3D achieves state-of-the-art accuracy on KITTI and Waymo, and the best reported car AP on Rope3D, while running up to 3.6$\,\times$ faster than prior high-accuracy models (e.g., MonoDiff). LeAD-M3D demonstrates that high fidelity and real-time monocular 3D detection is simultaneously attainable, without LiDAR, stereo, or strong geometric assumptions.

Multimodal 3D object detection is fundamental to robust perception in autonomous driving because it integrates complementary information from LiDAR and camera sensors. However, existing methods often fail to maintain robustness under out-of-distribution (OOD) corruptions caused by sensor noise, adverse weather, and environmental changes. To address this problem, we propose RoboDistill, a robust and generalizable multimodal 3D object detection framework that leverages visual foundation models (VFMs), such as the Segment Anything Model (SAM). First, we introduce SAM-AD, a domain-specific pretraining strategy that fine-tunes SAM on autonomous-driving imagery to extract feature representations with rich semantic information. Second, we design the AD Feature Pyramid Network (AD-FPN) to refine and upsample SAM features at multiple scales for seamless fusion with LiDAR features. Third, we develop the Depth-Guided Wavelet Attention (DGWA) module, which suppresses high-frequency sensor noise while preserving critical contextual information. Finally, we introduce KD Fusion, in which the pretrained SAM-AD serves as a teacher that distills high-quality visual knowledge into a lightweight point-cloud network, thereby improving robustness under noisy conditions. Extensive experiments across 27 challenging OOD corruption settings show that RoboDistill generally delivers stronger or competitive detection performance and robustness relative to representative state-of-the-art methods. This work bridges the gap between VFMs and 3D object detection and advances robust multimodal perception for real-world autonomous-driving applications.