CRAFT: A Tendon-Driven Hand with Hybrid Hard-Soft Compliance

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.

Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.