Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.
Dexterous grasping depends on contact regulation, not motion alone. Stable manipulation requires fingers to maintain appropriate object loading as contacts slip, deform, or become visually occluded. Existing cross-embodiment dexterous policies unify motion through retargeted hand poses or latent actions, but force feedback remains tied to each hand's sensing and actuation, limiting transfer. This work introduces a cross-embodiment force-position interface for contact-aware manipulation across heterogeneous dexterous hands. Motion intent is represented in a shared hand-pose latent, while each hand's effort signal is calibrated through system identification into physical joint torque in N.m. These torques are mapped to fingertip forces and compact per-finger load descriptors, giving the policy comparable observations of where the hand should move and how the object is loaded. Using this interface, a flow-matching visuomotor policy is trained on vision, proprioception, and calibrated contact, with structured visual masking that encourages reliance on force under grasp-relevant occlusion. The same calibrated signal drives a hybrid force-position controller for demonstration collection and execution, keeping force targets consistent across training and deployment. Experiments across structurally different hands show that calibrated contact feedback enables transferable compliant grasping, with learned primitives reusable in long-horizon manipulation pipelines.
In-hand object manipulation is a fundamental yet challenging capability for dexterous robots. Despite significant progress in dexterous manipulation, existing approaches rely heavily on vision or tactile sensing to track object states, while joint sensing -- the most readily available modality on any robotic hand -- remains largely overlooked, particularly for tendon-driven hands. In this paper, we study how far joint sensing alone can go by asking: (i) whether motor encoders or direct joint sensing provides better proprioceptive feedback, (ii) how to extract environment information from joint measurements, and (iii) whether joint-only control can achieve competitive real-world performance without external perception. We present the Proprioceptive Transformer (PT), an exteroceptive-free approach for continuous cube rotation on a tendon-driven dexterous hand that uses only joint sensing feedback. A teacher policy is first trained via reinforcement learning with privileged object information, then distilled into PT, which operates solely on joint position and velocity histories. The Transformer architecture effectively extracts implicit object state information from temporal patterns in joint sensor readings. Experiments on the real ORCA hand show that our approach achieves 3.1x higher rotation speed than baselines. We also demonstrate that our PT achieves a 23.4% lower RMSE for cube position estimation than the MLP baseline, indicating superior extraction of exteroceptive information from proprioceptive sources.
Perceiving physical contact is fundamental to dexterous manipulation. While robots often rely on dedicated hardware tactile sensors, humans exhibit a remarkable ability to infer contact by integrating visual information with an innate sense of their body's pose and movement. Inspired by this embodied perceptual skill, we investigate whether a robot can learn to infer contact from vision, an approach that also offers a scalable alternative to tactile hardware specifically for binary contact estimation, which faces practical challenges in cost, fragility, and integration. We present NoContactNoWorries, a transformer-based multimodal framework that fuses RGB-D vision with the robot's proprioception to infer binary contact states as a pseudo-tactile signal for hand-object interactions. We validate by training a single contact prediction model on multiple objects and show that the inferred contact signal supports downstream reinforcement learning agents for in-hand object reorientation, generalizing to novel objects. Experiments in both simulation and on a real-world robot validate our approach, highlighting the feasibility of inferring contact from vision and proprioception. Project Page: https://soham2560.github.io/no-contact-no-worries/