Reinforcement Learning for Elliptical Cylinder Motion Control Tasks

Electromagnetic Navigation Systems (eMNS) have gained considerable attention for minimally invasive surgery and targeted drug delivery. While most of the literature relies on quasi-static control of these systems, recent work has demonstrated the benefits of dynamic approaches. However, trajectory tracking far from equilibrium states remains largely unaddressed. We close this gap by demonstrating the first swing-up of a magnetically actuated inverted pendulum using the clinically-ready Navion eMNS. Although the inverted pendulum is not clinically relevant in itself, the proposed method utilizes torques and forces as control objectives, making it applicable to other magnetically actuated devices such as catheters and guidewires. Our approach combines trajectory optimization that accounts for internal eMNS dynamics with time-varying Linear Quadratic Regulator (LQR) state feedback and Iterative Learning Control (ILC), which leverages previous trial data and the system's dynamic model to progressively refine the feedforward command. While LQR alone fails due to the complex phenomena of magnetic actuation, ILC enables successful swing-up within six iterations. Furthermore, post-experimental analysis reveals that the learned ILC correction closely matches the torque discrepancy predicted by high-fidelity magnetic field model calibration, suggesting learning and adaptation as a promising tool to deal with uncertainties in electromagnetic actuation arising, e.g., from patient-specific physiological motion patterns and field model calibration inaccuracies.

Reinforcement learning (RL) is a powerful and convenient tool to modernize controller design. In this work, we study the zero-shot transfer of RL-based control policies from simulation to hardware for cart-pole swing-up and stabilization. The two policies are trained independently, and the handoff is implemented in Simulink via switching logic. We apply a first-order action smoothing filter to prevent hardware damage from high-frequency oscillatory actuation. Pairing this bandwidth-aware filtering with sensitivity-guided domain randomization (DR) and a simple linear curriculum learning (CL) schedule, we obtain a swing-up policy that in all of our experiments injects sufficient energy for handoff into the stabilizer's region of attraction. The stabilization policy rejects disturbances within the tested range, and the swing-up policy can re-engage after larger perturbations and restores the pendulum to the inverted position.

Model Predictive Control (MPC) provides a structured and constraint-aware mechanism for decision-making, but its reliance on optimization-friendly analytical dynamics models limits its use in tasks with contacts and other hard-to-model state dependencies. Model-free reinforcement learning avoids explicit modeling assumptions but typically requires large amounts of interaction data. We present a learning-based MPC framework that combines the data efficiency and structure of local model-based planning with learned components that compensate for incomplete dynamics and finite-horizon myopia. The method augments a nominal analytical model with a residual dynamics network that learns missing state-dependent effects from data and combines the resulting planner with a learned action-value critic that injects long-horizon MDP structure into the local iLQR optimization. To make this practical at reinforcement-learning scale, we develop a GPU-accelerated batched iLQR solver that evaluates learned dynamics and critic networks inside the optimal-control loop and solves thousands of trajectory-optimization problems in parallel. The complete system is integrated into a robotics simulator, enabling scalable model-based reinforcement learning under incomplete dynamics. Experiments on biased and incompletely modeled control tasks show that the approach improves closed-loop control performance while preserving the model-based structure needed for efficient constrained trajectory optimization.