A Methodology for Dynamic Parameters Identification of 3-DOF Parallel Robots in Terms of Relevant Parameters

This paper presents a reproducible and physically feasible dynamic parameter identification framework for CRANE-X7, a low-cost robot arm driven by modular smart actuators. To improve practical identifiability, products of inertia are removed according to approximate link symmetry, reducing the rigid-body model from 65 to 39 base parameters. Identification motions are hand-designed from structured single-joint and adjacent-joint primitives under practical joint-range limits. The proposed pipeline combines preprocessing, inverse-dynamics-regressor-based ordinary least squares (OLS), conditional semidefinite-programming (SDP) projection for feasibility recovery, and closed-loop input error (CLIE) refinement. Candidate solutions from 40 structured trajectories are analyzed in a common principal component analysis (PCA) space to select a statistically central representative model. Because statistical centrality alone does not ensure physical acceptability, the selected model is finally screened by an all-pose positive-definiteness audit of the inertia matrix and, when necessary, corrected by a localized post-CLIE SDP rescue step. Experiments show that the parameter cloud becomes progressively more concentrated from OLS to SDP and CLIE, while the final accepted model preserves high predictive accuracy on held-out validation motions. These results demonstrate a practical route to statistically coherent and physically feasible dynamic models for low-cost robot platforms.

Accurate physical parameter identification of manipulated objects is fundamental to advanced robotic manipulation and the construction of faithful digital twins. However, acquiring physically consistent inertial and frictional properties from real-world interactions remains challenging due to sensing noise, modeling errors, and limited prior knowledge. This paper presents RigPI, a systematic framework for identifying dynamic parameters of both unconstrained rigid bodies and multi-link rigid bodies during robot-object interaction. RigPI integrates vision-based semantic priors, force-torque measurements, and motion observations within a differentiable simulation pipeline. A vision-language model (VLM) provides informed initialization and a constrained search space, while gradient information from a differentiable physics simulator enables efficient and stable parameter refinement. The proposed two-stage optimization strategy alleviates sensitivity to noise and avoids physically implausible solutions. Extensive real-world experiments on objects with revolute and prismatic joints demonstrate that RigPI achieves accurate and stable parameter estimates, and successfully reproduces manipulation trajectories on a real robot with parameter-aware predictive validity. These results highlight the effectiveness and robustness of RigPI for real-world robotic system identification tasks.

Robot model identification is commonly performed by least-squares regression on inverse dynamics, but existing formulations measure residuals directly in coordinate force space and therefore depend on the chosen coordinate chart, units, and scaling. This paper proposes a coordinate-independent identification method that weights inverse-dynamics residuals by the dual metric induced by the system Riemannian metric. Using the force--velocity vector--covector duality, the dual metric provides a physically meaningful normalization of generalized forces, pulling coordinate residuals back into the ambient mechanical space and eliminating coordinate-induced bias. The resulting objective remains convex through an affine-metric and Schur-complement reformulation, and is compatible with physical-consistency constraints and geometric regularization. Experiments on an inertia-dominated Crazyflie--pendulum system and a drag-dominated LandSalp robot show improved identification accuracy, especially on shape coordinates, on both downsampled and full datasets.