KUKAloha: A General, Low-Cost, and Shared-Control based Teleoperation Framework for Construction Robot Arm

Humanoid robots, with their human-like shape and multi-tasking capabilities, are well-aligned with human-dominated workplaces, like those in civil and construction engineering, where they could collaborate with human workers or autonomously perform physically demanding and hazardous tasks. Despite this promise, limited research has explored how to endow these robots with the practical capabilities needed to perform construction tasks. To this end, this study proposes a novel perception-and-action system that enables humanoid robots to learn and perform construction tasks from worker demonstrations. This system contains two deep networks: Humanoid-PoseNet, which extracts human postures and translates them into mechanically feasible poses for a humanoid robot; and Humanoid-ActionNet, which learns robot-executable actions based on these translated poses. Experimental results demonstrate that the humanoid robot reliably executed eight construction-related actions, achieving an average motion-tracking error of 82.45 mm MPJPE (Mean Per Joint Position Error). This work provides an early step toward deploying humanoid collaborators in construction.

We present a teleoperation system that enables a single operator to perform construction tasks on a Unitree G1 humanoid, combining extended reality (XR) based upper body control with pedal-based locomotion to enable simultaneous manipulation and locomotion. Motivated by persistent labor shortages, hazardous working conditions, and challenges in humanoid autonomy, we investigate teleoperation as a practical near-term approach for reducing physical strain on workers while generating high quality demonstration data. We evaluate the system on two representative construction tasks drawn from O*NET occupational database, and report task success and completion time relative to a manual baseline. The system achieved 100% success on tool transport and 80% success on surface painting, with teleoperation requiring substantially more time compared to manual execution.

Teleoperating a robotic manipulator in industrial environments demands precision that camera-based interfaces alone struggle to deliver. The operator must align the end-effector with a target in clutter, under limited depth perception, and without colliding with the surrounding structures. This paper presents a shared-autonomy framework that assists the operator throughout this process. A single RGB-D camera captures the operator's arm motion and hand gestures without wearables, fiducials, or a calibration stage. The intended target is specified by a free-form text prompt, grounded by a vision-language model in the robot's gripper camera, and tracked across its onboard cameras by a promptable video-segmentation model, resulting in a grasp frame continuously separated from the obstacle map. Every commanded motion is executed by a GPU-accelerated model-predictive controller that enforces self- and environment-collision avoidance against an online volumetric reconstruction, while a potential field corrects the operator's reference toward the grounded target during the final approach. An autonomous mode can be gesture-triggered to complete the grasp on the same target without a separate perception pipeline. The framework is validated on a quadruped mobile manipulator. The interface achieves a positional RMSE of 59 mm relative to motion-capture ground truth, and the controller keeps the arm at least 18 cm from obstacles while the operator deliberately commands the arm into them by 6 cm. In an industrial valve manipulation and a pick-and-place task, the full framework succeeded in all trials, while ablating either the collision or the assistance module produced failures through complementary mechanisms, and autonomous execution succeeded in four of five trials per task.