DecompGrind: A Decomposition Framework for Robotic Grinding via Cutting-Surface Planning and Contact-Force Adaptation

Acoustic feedback is a critical indicator for assessing the contact condition between the tool and the workpiece when humans perform grinding tasks with rotary tools. In contrast, robotic grinding systems typically rely on force sensing, with acoustic information largely ignored. This reliance on force sensors is costly and difficult to adapt to different grinding tools, whereas audio sensors (microphones) are low-cost and can be mounted on any medium that conducts grinding sound. This paper introduces a low-cost Acoustic Feedback Robotic Grinding System (AFRG) that captures audio signals with a contact microphone, estimates grinding force from the audio in real time, and enables closed-loop force control of the grinding process. Compared with conventional force-sensing approaches, AFRG achieves a 4-fold improvement in consistency across different grinding disc conditions. AFRG relies solely on a low-cost microphone, which is approximately 200-fold cheaper than conventional force sensors, as the sensing modality, providing an easily deployable, cost-effective robotic grinding solution.

The increasing demand for accelerated scientific discovery, driven by global challenges, highlights the need for advanced AI-driven robotics. Deploying robotic chemists in human-centric labs is key for the next horizon of autonomous discovery, as complex tasks still demand the dexterity of human scientists. Robotic manipulation in this context is uniquely challenged by handling diverse chemicals (granular, powdery, or viscous liquids), under varying lab conditions. For example, humans use spatulas for scraping materials from vial walls. Automating this process is challenging because it goes beyond simple robotic insertion tasks and traditional lab automation, requiring the execution of fine-granular movements within a constrained environment (the sample vial). Our work proposes an adaptive control framework to address this, relying on a low-level Cartesian impedance controller for stable and compliant physical interaction and a high-level reinforcement learning agent that learns to dynamically adjust interaction forces at the end-effector. The agent is guided by perception feedback, which provides the material's location. We first created a task-representative simulation environment with a Franka Research 3 robot, a scraping tool, and a sample vial containing heterogeneous materials. To facilitate the learning of an adaptive policy and model diverse characteristics, the sample is modelled as a collection of spheres, where each sphere is assigned a unique dislodgement force threshold, which is procedurally generated using Perlin noise. We train an agent to autonomously learn and adapt the optimal contact wrench for a sample scraping task in simulation and then successfully transfer this policy to a real robotic setup. Our method was evaluated across five different material setups, outperforming a fixed-wrench baseline by an average of 10.9%.

Grinding and sanding are fundamental processes in industrial robotic surface finishing. However, physical trials are expensive and consume workpieces, making reproducible experiments difficult. We present RoboFin3D, a sim-to-real platform built on Isaac Sim and the Newton physics engine, that provides physics-based grinding and sanding simulation for cheap and repeatable robotic surface finishing experiments. RoboFin3D utilizes a signed distance field (SDF) to model the changing geometry of the workpiece, enabling contact computation, live updates and rendering without an intermediate mesh. It additionally uses a separate surface field to model progressive surface appearance change during sanding. We also introduce WeldGen, a weld sampling module, to generate weld beads on 8,918 real-world workpiece meshes for providing diverse simulation assets. The simulation parameters are calibrated on real experimental results and our evaluation demonstrates our simulation's fidelity against the real world. We also demonstrate that simulation-generated data can be used to improve the performance of perception models. Simulation-only fine-tuning of SAM2 improves IoU for segmentation of unsanded regions from 77.15% to 84.47%, while combined synthetic and real training reaches 97.41%.