TerraSkipper: A Centimeter-Scale Robot for Multi-Terrain Skipping and Crawling

At the water-land interface, amphibious fishes encounter wet flowable substrates made of granular solid-water mixtures, which can stay solid or flow like a fluid. As these substrates become wetter or drier, their yield strength (at which solid-fluid transition occurs) and cohesion (how sticky they are) both change, challenging locomotion. Despite substantial understanding of tetrapod locomotion on flowable substrates (mostly dry sand), we know little about how amphibious fishes cope with wet flowable substrates of various wetness. Here, we studied mudskippers on clay mud of controlled, variable wetness over the range where solid-fluid transition occurs. As mud became wetter, its strength decreased by 100-fold, leading the animal to sink deeper, with larger areas of body and fins contacting mud. By contrast, mud stuck most easily at intermediate wetness. The increased sinkage and contact and stickiness change caused more mud to stick to and pull against the animal on wetter mud. We also tested dry mud, which stuck to animal fins as its mucus dried. Despite these challenges, the mudskipper predominately used a conserved crutching gait on all except the wettest mud tested, with a modest performance reduction. When normal crutching became less effective, the animal assisted it with tail thrusting, by bending and straightening it to push downward and backward to generate additional thrust and lift, or even thrusting the tail to jump. These observations suggest that mudskipper's crutching motor program is well adapted to its native muddy substrates but inflexible, with most novelty in tail use.

Unlike their large-scale counterparts, small-scale robots are largely confined to laboratory environments and are rarely deployed in real-world settings. As robot size decreases, robot-terrain interactions fundamentally change; however, there remains a lack of systematic understanding of what sensory information small-scale robots should acquire and how they should respond when traversing complex natural terrains. To address these challenges, we develop a Small-scale, Intelligent, Lizard-inspired, Adaptive Robot (SILA Bot) capable of adapting to diverse substrates. We use granular media of varying depths as a controlled yet representative terrain paradigm. We show that the optimal body movement pattern (ranging from standing-wave bending that assists limb retraction on flat ground to traveling-wave undulation that generates thrust in deep granular media) can be parameterized and approximated as a linear function of granular depth. Furthermore, proprioceptive signals, such as joint torque, provide sufficient information to estimate granular depth via a K-Nearest Neighbors classifier, achieving 95% accuracy. Leveraging these relationships, we design a simple linear feedback controller that modulates body phase and substantially improves locomotion performance on terrains with unknown depth. Together, these results establish a principled framework for perception and control in small-scale locomotion and enable effective terrain-adaptive locomotion while maintaining low computational complexity.

Legged locomotion on flowing ground ({\em e.g.} granular media) is unlike locomotion on hard ground because feet experience both solid- and fluid-like forces during surface penetration. Recent bio-inspired legged robots display speed relative to body size on hard ground comparable to high performing organisms like cockroaches but suffer significant performance loss on flowing materials like sand. In laboratory experiments we study the performance (speed) of a small (2.3 kg) six-legged robot, SandBot, as it runs on a bed of granular media (1 mm poppy seeds). For an alternating tripod gait on the granular bed, standard gait control parameters achieve speeds at best two orders of magnitude smaller than the 2 body lengths/s ($\approx 60$ cm/s) for motion on hard ground. However, empirical adjustment of these control parameters away from the hard ground settings, restores good performance, yielding top speeds of 30 cm/s. Robot speed depends sensitively on the packing fraction $φ$ and the limb frequency $ω$, and a dramatic transition from rotary walking to slow swimming occurs when $φ$ becomes small enough and/or $ω$ large enough. We propose a kinematic model of the rotary walking mode based on generic features of penetration and slip of a curved limb in granular media. The model captures the dependence of robot speed on limb frequency and the transition between walking and swimming modes but highlights the need for a deeper understanding of the physics of granular media.