Dynamic Control Allocation for Dual-Tilt UAV Platforms

Fully actuated omnidirectional UAVs enable independent control of forces and torques along all six degrees of freedom, broadening the operational envelope for agile flight and aerial interaction tasks. However, conventional control allocation methods neglect the asymmetric dynamics of the onboard actuators, which can induce oscillatory motor commands and degrade trajectory tracking during dynamic maneuvers. This work proposes a receding-horizon, actuation-aware allocation strategy that explicitly incorporates asymmetric motor dynamics and exploits the redundancy of over-actuated platforms through nullspace optimization. By forward-simulating the closed-loop system over a prediction horizon, the method anticipates actuator-induced oscillations and suppresses them through smooth redistribution of motor commands, while preserving the desired body wrench exactly. The approach is formulated as a constrained optimal control problem solved online via Constrained iterative LQR. Simulation results on the OmniOcta platform demonstrate that the proposed method significantly reduces motor command oscillations compared to a conventional single-step quadratic programming allocator, yielding improved trajectory tracking in both position and orientation.

From a maneuverability perspective, the main advantage of tilting multirotor UAVs lies in the dynamic variability of the feasible executable wrench, which represents a key asset for physical interaction tasks. Accordingly, cant-angle selection should be optimized to ensure high performance while avoiding abrupt variations and preserving real-world feasibility. In this context, this work proposes a lightweight control framework for star-shaped interdependent cant-tilting hexarotor UAVs performing interaction tasks. The method uses an offline-computed look-up table of zero-moment force polytopes to identify feasible cant angles for a desired control force and select the optimal one by balancing efficiency and smoothness. The framework is integrated with a geometric full-pose controller and validated through Monte Carlo simulations in MATLAB/Simulink and compared against a baseline strategy. The results show a significant reduction in computation time, together with improved pose-tracking performance and competitive actuation efficiency. A final physics-based simulation of a complete wall inspection task in Simscape further confirms the feasibility of the proposed strategy in interacting scenarios.

Control allocation for multirotors with bidirectional propellers is commonly formulated in signed-thrust variables, where the wrench map is linear. The signed-quadratic map from physical rotor speed to thrust, however, is not a local diffeomorphism at zero speed. This work derives two distinct consequences. Under nonredundant full actuation, a single-propeller reversal removes one instantaneous task direction; hence, no global continuously differentiable exact static allocator exists over the complete task space. Under redundant actuation, the physical task map may remain regular, yet a transverse pseudoinverse zero crossing requires an unbounded rotor-speed derivative. We define differential realizability as regularity of the physical lift of an actuator-output section, derive exact and first-order validity conditions, and distinguish structural rank loss from an allocator- induced rate singularity. A local nullspace deformation repairs isolated pseudoinverse reversals, while a global fixed-orthant construction establishes existence of regular sections at the cost of persistent task-preserving internal actuation.