AgiPIX: Bridging Simulation and Reality in Indoor Aerial Inspection

Most existing drone-based inspection systems require the drone to fly dangerously close to the target or follow complex flight paths to capture small details. In addition, drone flight is affected by disturbances and localization inaccuracies, which can cause the drone to lose sight of its supposed target when it has a narrow view. Furthermore, trajectory planning often requires prior information about the target's geometry, position, and orientation, which is not always available for non-structural targets such as trees, vehicles, or people. To address these challenges, this paper presents aerial_micro_inspection, a generic pipeline for aerial micro-inspection across different use cases. The pipeline assumes a PX4-powered drone equipped with two cameras: (i) a zoomed, gimbal-mounted inspection camera that captures fine details without requiring the drone to fly very close to the target, and (ii) a wide-field-of-view stereo navigation camera that acquires the target surface on site, estimates its range, and partitions it into smaller inspection regions. In addition, a vision-based feedback loop compensates for drone motion while the inspection camera visits small partitions of a larger surface. We evaluate the pipeline in simulation and real-world experiments, mainly in two use-case scenarios: tree inspection for detecting oak processionary caterpillars and their eggs, and greenhouse inspection of sticky traps for detecting whiteflies. The results show improved coverage robustness under drone disturbances in simulation, as well as effective detection of caterpillars and eggs and high-detail imaging of insects in real-world experiments. The pipeline is open-source, developed in ROS 2, and can be adapted to new applications by replacing the surface-segmentation and micro-target detection checkpoints. The code is available at: https://github.com/SaxionMechatronics/aerial_micro_inspection

As spatial intelligence continues to evolve, heterogeneous multi-agent systems-particularly the collaboration between Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs), have demonstrated strong potential in complex applications such as search and rescue, urban surveillance, and environmental monitoring. However, existing simulation platforms are primarily designed for single-agent dynamics and lack dedicated frameworks for interactive air-ground collaborative simulation. In this paper, we present AirsimAG, a high-fidelity air-ground collaborative simulation platform built upon an extensively customized AirSim framework. The platform enables synchronized multi-agent simulation and supports heterogeneous sensing and control interfaces for UAV-UGV systems. To demonstrate its capabilities, we design a set of representative air-ground collaborative tasks, including mapping, planning, tracking, formation, and exploration. We further provide quantitative analyses based on these tasks to illustrate the platform effectiveness in supporting multi-agent coordination and cross-modal data consistency. The AirsimAG simulation platform is publicly available at https://github.com/BIULab-BUAA/AirSimAG.

The convergence of low-altitude economies, embodied intelligence, and air-ground cooperative systems creates growing demand for simulation infrastructure capable of jointly modeling aerial and ground agents within a single physically coherent environment. Existing open-source platforms remain domain-segregated: driving simulators lack aerial dynamics, while multirotor simulators lack realistic ground scenes. Bridge-based co-simulation introduces synchronization overhead and cannot guarantee strict spatial-temporal consistency. We present CARLA-Air, an open-source infrastructure that unifies high-fidelity urban driving and physics-accurate multirotor flight within a single Unreal Engine process. The platform preserves both CARLA and AirSim native Python APIs and ROS 2 interfaces, enabling zero-modification code reuse. Within a shared physics tick and rendering pipeline, CARLA-Air delivers photorealistic environments with rule-compliant traffic, socially-aware pedestrians, and aerodynamically consistent UAV dynamics, synchronously capturing up to 18 sensor modalities across all platforms at each tick. The platform supports representative air-ground embodied intelligence workloads spanning cooperation, embodied navigation and vision-language action, multi-modal perception and dataset construction, and reinforcement-learning-based policy training. An extensible asset pipeline allows integration of custom robot platforms into the shared world. By inheriting AirSim's aerial capabilities -- whose upstream development has been archived -- CARLA-Air ensures this widely adopted flight stack continues to evolve within a modern infrastructure. Released with prebuilt binaries and full source: https://github.com/louiszengCN/CarlaAir