In-situ process monitoring for defect detection in wire-arc additive manufacturing: an agentic AI approach

Robotics Wire Arc Additive Manufacturing (WAAM) is governed by complex and nonlinear process dynamics coupling thermal field to the build geometry. The process may be regarded as a multi-input/multi-output dynamical system with welding torch speed and wire feed rate as inputs and weld bead deposition height and width as outputs. In this paper, we use the input/output data to learn a data-driven model and use it for weld planning and control. We show that a simple recurrent neural network architecture and one-step-ahead predictive control can improve the process performance in terms of height and width consistency. To account for the changing thermal conditions during the printing process, we update the learning model using prediction error from the previous layer. This adaptation step further improves the prediction accuracy and controller performance. Experiments on a robotic WAAM testbed with integrated line-scanner feedback significant improvements in height and width consistency compared to constant input and static model baselines. The proposed learning and adaptation framework provides a practical pathway toward robust, data-driven regulation of additive manufacturing processes.

Deep learning is an efficient technique to monitor the real time welding process, reducing post-welding repairs and production delays. This paper leverages the monitoring capability by proposing a multi modal temporal attention based deep learning defect detection model for internal defects that are challenging to detect, including porosity, lack of penetration and fusion, undercut, and cold lap during Gas Metal Arc Welding in fillet joints. The model is trained on collected welding images and sound data from an industrial collaborative welding robot. The results show that the attention module can improve the F1 Score to 0.99. We use explainable Artificial Intelligence to interpret the proposed models behavior and dataset distribution, determining potential important areas in image and sound spectrograms and preferred modality to detect each defect. This improves trust and reliability in Artificial Intelligence driven welding inspection.

Robotic additive manufacturing (AM) extends material-extrusion printing beyond gantry kinematics but makes process planning robot-dependent. A slicer-generated plan that appears favorable in part coordinates can become infeasible or robotically unfavorable on a manipulator because slicer-process decisions and part orientation determine the generated path, while part orientation and workspace placement affect its kinematic realization. Existing AM tools, large language model (LLM)-based decision-support methods, and digital-shadow systems do not provide integrated pre-execution evaluation of these coupled decisions. This paper presents agentic robotic additive manufacturing (A-RAM), an agent-specialist-tool framework that converts user intent and a part file into traceable, execution-ready plans. The LLM interprets manufacturing objectives and constraints, identifies prescribed and searchable planning variables, and encodes this reasoning in a schema-constrained request; a deterministic Planning Agent instantiates the corresponding search workflow, while domain tools compute quantitative evidence for slicing, placement, inverse kinematics, trajectory timing, Joint-6 jerk, and extrusion. The framework is evaluated on a six-axis robotic-arm AM cell through three case studies covering expert-specified planning, goal-only planning, objective-dependent infill screening, and geometry-dependent orientation-placement selection. Across the evaluated candidate sets, selected plans achieve up to 53.5% lower maximum Joint-6 jerk and 48.3% lower mean absolute Joint-6 jerk than the least favorable valid candidates, while objective-specific infill screening yields motion-plan completion times up to 40.1% shorter and extrusion paths up to 12.7% shorter than the corresponding least favorable screened patterns.