Trajectory Planning for an Articulated Commercial Vehicle using Model Predictive Contouring Control
Authors: A. J. Aertssen, R. G. M. Huisman, I. J. M. Besselink, J. Elfring, M. J. G. van de Molengraft
Abstract
This paper presents a trajectory planning method for articulated commercial vehicles, specifically tractor-semitrailers, based on Model Predictive Contouring Control (MPCC). Although MPCC has proven effective for passenger cars, it is generally ill-suited for tractor-semitrailers. These vehicles are significantly larger, the semitrailer follows a different path than the tractor, and reversing maneuvers are unstable and prone to jackknifing. Furthermore, practical driving scenarios often require scenario-dependent prioritization of different vehicle `anchor points', e.g., prioritizing the semitrailer position during docking or the tractor position when parking to charge. Therefore, we extend MPCC to enable scenario-dependent weighting of these anchor points and incorporate explicit road-boundary constraints for the front and rear tractor axles and the semitrailer axle, thereby ensuring that all considered wheels remain within the drivable area. The simulation results demonstrate the successful navigation of a representative logistic scenario in both forward and reverse direction. Furthermore, the influence of the optimization parameters on the trajectories is analyzed, providing insights into controlling the vehicle behavior. Finally, first tests using a full-scale prototype vehicle show the practical applicability of the approach.
This paper presents a novel non-linear mathematical model of an articulated tractor-trailer system that can be used, in combination with receding horizon techniques, to improve the performance of path tracking tasks of articulated systems. Due to its dual steering mechanisms, this type of vehicle can be very useful in precision agriculture, particularly for seeding, spraying and harvesting in small fields. The articulated tractor-trailer system model was embedded within a non-linear model predictive controller and the trailer position was monitored. When the kinematic of the trailer was considered, the deviation of trailer's position was reduced substantially alongside not only straight paths but also in headland turns. Using the proposed mathematical model, we were able to control the trailer's position itself rather than the tractor's position. The Robot Operating System (ROS) framework and Gazebo simulator were used to perform realistic simulations examples.
Flapping-wing micro aerial vehicles offer quieter and safer operation than rotary-wing drones, yet achieving precise autonomous control of bird-scale ornithopters remains challenging: lift, airspeed, and turning authority are tightly coupled and governed by only a few control inputs. Conventional cascaded controllers treat altitude, speed, and heading independently, producing persistent tracking errors during complex maneuvers, while time-parameterized trajectory tracking requires predefined speed profiles that existing methods cannot robustly produce for these coupled dynamics. We address both limitations simultaneously with a Model Predictive Contouring Control (MPCC) approach that tracks arc-length-parameterized trajectories while optimizing progress online, eliminating the need for predefined timing. However, MPCC requires a dynamical model that captures the coupled aerodynamics without exceeding the computational budget of real-time nonlinear optimization. Here, we propose a compact, continuously differentiable model that captures the dominant couplings of bird-scale ornithopters, enabling real-time predictive control. We validated the method with the XFly ornithopter flying along circular and three-dimensional racing trajectories and achieved a mean deviation from the reference trajectory between 6.5 and 9 cm at speeds up to 3 m/s, which represents an almost 10-fold improvement over prior ornithopter control methods.
This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.