Feasibility-aware Hybrid Control for Motion Planning under Signal Temporal Logics

Autonomous mobile robots operating in tight environments require motion planning frameworks that account for the physical footprint of the robot. Simplifying the geometry to a point or a circle is conservative and discards information needed to successfully and safely traverse narrow passages. This work proposes a safe local motion planning and control method that guarantees that a polytopic robot footprint stays inside a continuously updated convex free-space region. The containment condition is formulated as a set of discrete-time control barrier function constraints within a model predictive controller. The number of safety constraints depends on the complexity of the local free-space geometry and the robot shape, instead of the number of obstacles. The proposed free-space formulation does not need any obstacle detection or segmentation. A comparative analysis against a polytope-based obstacle avoidance formulation confirms favorable scaling up to a reduction of 91$\times$ in computation time as the number of obstacles increases. The approach is validated in simulation with an autonomous surface vehicle and on hardware with a non-holonomic mobile robot, using both occupancy grids and LiDAR sensing. The experiments demonstrate safe real-time motion planning and control at 10~Hz on an onboard embedded computer, including reactive avoidance of dynamic obstacles.

We present a unified trajectory planning and control framework for the satisfaction of Signal Temporal Logic (STL) specifications defined over convex predicates. At the planning layer, STL tasks are encoded as time-varying convex sets in configuration space, specifically designed so that forward invariance of the system with respect to these sets implies satisfaction of the specification with a prescribed robustness margin. This representation is then lifted to the joint time--configuration space and combined with the Graphs of Convex Sets (GCS) framework, yielding a shortest-path formulation of the planning problem over convex spatio-temporal sets. Trajectories are parameterized by B-splines, which enable continuous-time enforcement of STL satisfaction, collision avoidance, and smoothness constraints. At the control layer, the same time-varying sets used for planning are exploited to design a feedback controller that tracks the planned trajectory while prioritizing satisfaction of the STL specification during execution in the presence of tracking errors and model mismatch. We validate the proposed approach in simulation and in real-world experiments on space robotic platforms.

This paper investigates continuous-time motion planning under Signal Temporal Logic (STL) specifications. The goal is to generate smooth robot trajectories that satisfy high-level logical and timing requirements while respecting low-level motion constraints. To this end, we propose an efficient framework that combines timed-automata reasoning with graphs of convex sets (GCS). An STL specification is first represented by a timed automaton, which is then coupled with a convex decomposition of the configuration space to form a joint transition system encoding both task progress and region occupancy. Based on this joint transition system, the STL motion-planning problem is reformulated as a shortest-path problem over a GCS, whose solution induces a smooth Bézier-spline trajectory satisfying the STL specification, smoothness requirements, and velocity bounds. We establish the soundness of the proposed formulation and analyze its computational complexity, showing that, once the timed automaton and convex decomposition are fixed, the convex relaxation scales polynomially with the configuration-space dimension and the Bézier degree. We further develop a compact timed-automaton construction for an expressive STL fragment using dedicated templates and Boolean composition. Numerical experiments on low-dimensional benchmarks, a $3$-D quadrotor, a $30$-DoF humanoid, and a hardware experiment on a UR-3 robot arm demonstrate that the proposed method efficiently solves complex STL motion-planning problems and produces smooth executable trajectories.