Abstract
Sub-footprint target mixing within a laser footprint significantly increases LiDAR intensity uncertainty, especially in complex environments where heterogeneous materials inside one footprint cause nonlinear distortions that impair intensity-based applications. However, the forward mixing inherent to the single-pixel detection mode of LiDAR systems blurs sub-footprint contributions, making sub-footprint effects difficult to address effectively in existing studies. To address this issue, we introduce a novel, physics-based framework that explicitly resolves sub-footprint intensity correction in full-waveform LiDAR (FW-LiDAR) point clouds. The key innovation is to make the otherwise implicit intra-footprint mixing process explicit: we first develop a spatiotemporal laser-beam distribution model to physically characterize within-footprint forward mixing of multi-target returns. Building on this formulation, we incorporate ancillary information including waveform parameters and surface geometry as constraints to pose a well-defined inverse unmixing problem and decompose each footprint into fractional contributions from multiple sub-targets. We then recover sub-footprint-corrected intensities by inverting the observed mixtures through a unified combination of parametric and model-driven approaches. To the best of our knowledge, few prior studies explicitly establish sub-footprint inversion and correction within a single laser footprint, and our framework offers a principled, physics-grounded solution. Experiments on both controlled and real-world LiDAR datasets demonstrate that the proposed method significantly enhances semantic separability across heterogeneous targets and intensity consistency across homogeneous targets.
Explore similar work
Jul 3, 2026cs.CV
Single-Photon Avalanche Diode (SPAD)-based Light Detection and Ranging (LiDAR) is emerging for autonomous vehicles due to its high sensitivity and precise depth sensing capabilities. However, flare caused by excessive photon returns or pile-up effects can lead to incorrect depth estimation and exaggerated boundaries in point clouds, resulting in severe distortions of geometric measurements, making flare suppression essential for safety-critical applications. Existing flare mitigation methods primarily operate at the hardware or signal-processing levels. While effective under specific configurations, they are largely rule-based and configuration-dependent, lacking learnable representations that generalize across diverse sensing scenarios. In this work, we reformulate flare suppression as a semantic segmentation problem, enabling data-driven learning of geometric and photometric cues directly from SPAD measurements. We first benchmark representative segmentation models on the newly introduced SPAD flare dataset and observe that they struggle to exploit the intrinsic multi-echo characteristics of SPAD signals. Motivated by this observation, we propose Physically-Informed segmentation for LiDAR Flare (PILF), a learning-based approach that treats the first and second echoes, together with ambient illumination, as distinct modalities, aggregating cross-echo information while jointly encoding geometric and photometric features. Experiments across multiple real-world scenes demonstrate that PILF significantly outperforms compared segmentation models, achieving up to 79.32% mIoU, and providing an effective solution for SPAD-based LiDAR flare suppression.
Xuanya Zhu, Linghao Shen
Jun 18, 2026cs.CV
Building footprint extraction is a fundamental task in photogrammetry, remote sensing, and computer vision. Recent image-based methods have achieved remarkable progress in extracting vectorized footprints from high-resolution optical imagery. However, optical imagery inherently susceptible to occlusions, perspective distortions, and residual relief displacement, yielding incomplete or misaligned footprint extraction. Furthermore, the lack of explicit elevation information limits its direct applicability to Level of Detail building modeling. In this paper, we present PCFootprint, the first large-scale public dataset for footprint extraction from airborne laser scanning point clouds. PCFootprint comprises \num{33000} tiles derived from the Estonian Land and Spatial Development Board, covering diverse urban and rural landscapes. Each tile spans \qtyproduct{128 x 128}{\m} with systematically aligned vectorized footprints aligned to point clouds. The dataset includes a \num{3000} tiles cross-domain test set for evaluating generalization across geographic regions. We establish comprehensive benchmarks by evaluating mainstream methods. Experimental results reveal significant challenges including high intra-class variance, data imbalance, and noise across complex geospatial environments. We believe PCFootprint will advance future research in building modeling, urban scene understanding, and geospatial analysis. The PCFootprint dataset is publicly available at \url{https://huggingface.co/datasets/Haoyuan-Shen/PCFootprint}.
Haoyuan Shen, Kuihao Wang, Ruisheng Wang +1
May 23, 2026cs.CV
Modern LiDARs are rapidly transitioning from bulky, mechanically scanned systems to ultra-compact, low-cost, solid-state arrays. This miniaturization-while enabling scalability, affordability, and camera-like data structures-introduces a new and severe failure mode: internal-multipath glare. When light from a bright or retroreflective surface reflects and scatters within the LiDAR, light that should reach a single pixel spreads across the pixel array. The resulting artifacts create phantom objects, obscure real ones, and produce safety-critical "ghosts in the point clouds." This paper introduces a physically grounded sensing model and algorithmic techniques for addressing this effect. We show that internal glare can be represented as a linear, scene-independent operator-the Transient Glare Spread Function (TGSF)-acting on the transient measurements. Building on this model, we develop a training-free approach that operates on low-level LiDAR detections (or echoes) prior to point-cloud formation, leveraging knowledge of the glare spread function to reason about the likelihood of each detection arising from glare. The resulting approach is compatible with existing LiDAR signal-processing pipelines, and deployable on unmodified commercial sensors. Using experiments with real single-photon LiDAR hardware, we demonstrate substantial suppression of severe glare artifacts while preserving true scene structure.
Avery Gump, Connor Henley, Sungjin Cheong +2