In this work, we address the problem of ensuring real-time safety in autonomous robot navigation, in spatially constrained dynamic environments, by utilizing only onboard sensors. We present a real-time control architecture that integrates a 3D LIDAR perception-based composite control barrier function(CBF)-based safety filter directly into the autonomy pipeline. The proposed perception-driven framework enforces collision avoidance constraints dynamically from onboard point cloud data, thus allowing a large number of constraints to be handled at the control frequency, while remaining minimally invasive to nominal task execution. The safety region is defined as an ellipsoid in the body-frame, consistent with the geometry of the platform, which induces time-varying constraints in the world frame as the robot rotates; this effect is handled through a dedicated formulation of time-varying (CBF) for each LIDAR point. We validate the system through multiple field experiments in underground environments by utilizing a quadruped platform performing a visual inspection task, demonstrating reliable operation in the presence of dynamic obstacles, unsafe high-level references, abrupt localization anomalies, and while traversing through narrow corridors.
Safe navigation of autonomous robots remains one of the core challenges in the field, especially in dynamic and uncertain environments. One prevalent approach is safety filtering based on control barrier functions (CBFs), which are easy to deploy but difficult to design. Motivated by the shortcomings of existing learning- and model-based methods, we propose a simple yet effective neural CBF design method for safe robot navigation in dynamic environments. We employ the idea of a composite CBF, where multiple neural CBFs are combined into a single CBF. Individual CBFs are trained using data generated offline via the Hamilton-Jacobi reachability framework to approximate the optimal safe set for single moving obstacles. Additionally, we use a residual neural architecture, ensuring that the estimated safe set does not intersect with the corresponding failure set. The method is extensively evaluated in simulation experiments for a ground robot and a quadrotor, comparing it against several baseline methods. The proposed method improves success rates by up to 18% over the strongest baseline, while maintaining comparable or lower path lengths and motion times. The method is also demonstrated in hardware experiments for both types of robots.
This paper presents a general end-to-end framework for constructing robust and reliable layered safety filters that can be leveraged to perform dynamic collision avoidance over a broad range of applications using only local perception data. Given a robot-centric point cloud, we begin by constructing an occupancy map which is used to synthesize a Poisson safety function (PSF). The resultant PSF is employed as a control barrier function (CBF) within two distinct safety filtering stages. In the first stage, we propose a predictive safety filter to compute optimal safe trajectories based on nominal potentially-unsafe commands. The resultant short-term plans are constrained to satisfy the CBF condition along a finite prediction horizon. In the second stage, instantaneous velocity commands are further refined by a real-time CBF-based safety filter and tracked by the full-order low-level robot controller. Assuming accurate tracking of velocity commands, we obtain formal guarantees of safety for the full-order system. We validate the optimality and robustness of our multistage architecture, in comparison to traditional single-stage safety filters, via a detailed Pareto analysis. We further demonstrate the effectiveness and generality of our collision avoidance methodology on multiple legged robot platforms across a variety of real-world dynamic scenarios.
Collision avoidance for robotic manipulators requires enforcing full-body safety constraints in high-dimensional configuration spaces. Control Barrier Function (CBF) based safety filters have proven effective in enabling safe behaviors, but enforcing the high number of constraints needed for safe manipulation leads to theoretic and computational challenges. This work presents a framework for full-body collision avoidance for manipulators in dynamic environments by leveraging 3D Poisson Safety Functions (PSFs). In particular, given environmental occupancy data, we sample the manipulator surface at a prescribed resolution and shrink free space via a Pontryagin difference according to this resolution. On this buffered domain, we synthesize a globally smooth CBF by solving Poisson's equation, yielding a single safety function for the entire environment. This safety function, evaluated at each sampled point, yields task-space CBF constraints enforced by a real-time safety filter via a multi-constraint quadratic program. We prove that keeping the sample points safe in the buffered region guarantees collision avoidance for the entire continuous robot surface. The framework is validated on a 7-degree-of-freedom manipulator in dynamic environments.