cs.ROMay 19, 2026

Multi-Session Ground Texture SLAM in Low-Dynamic Environments

Authors: Kyle M. HartBrendan Englot

Abstract

The simultaneous localization and mapping community has introduced a growing number of systems adapted for multi-session operations where the operational environment features low-dynamic changes that impact mapping, such as surface wear, weather phenomena, or seasonal change. These systems allow for lifelong operations by a robot within these environments. There is also growing interest in operations in environments where the unique ground texture is the only mapping feature available for use. These ground texture systems are not yet targeted for multi-session low-dynamic-change environments though. This work explores the impact of three different techniques on trajectory estimation accuracy in these multi-session low-dynamic ground texture environments. Of the three, the use of Kullback-Leibler Divergence, as a similarity score and a bias influencing loop closure confidence, is found to have the most success. We show an analysis of all three methods and a deeper exploration of the impact of Kullback-Leibler Divergence. We also introduce a dataset for use by the robotics community that contains multi-session images where the ground changes between sessions and also high-accuracy pose information for use in evaluation.

Explore similar work

Sep 14, 2026cs.RO

Chain-SLAM: Globally Consistent Backend for Multi-Session LiDAR SLAM via Chained Loop Closure

Maintaining consistency over long spatial and temporal horizons remains a fundamental challenge in large-scale LiDAR SLAM, particularly when integrating maps collected across multiple sessions. We present Chain-SLAM, a LiDAR SLAM backend enabling online multi-session map alignment and reuse with global consistency at large scale. We implement a chained loop closure mechanism that efficiently propagates geometric constraints across inter-session keyframes through an adjacency graph, enabling robust long-horizon consistency triggered by reliable short-horizon loop closures. The system initializes inter-session alignment with GNSS-proximity place recognition, then performs on-the-fly loop closure detections and joint optimization of loaded maps and newly acquired trajectories within a unified factor graph, maintaining both inter- and intra-session geometric consistency without dynamic object removal, and cross-platform robustness with minimal hyperparameter tuning. Experimental results show improved trajectory accuracy and robust multi-session integration on large-scale datasets. We release our source code to support reproducible research in large-scale multi-session LiDAR SLAM. Project site: https://ai4ce.github.io/Chain-SLAM/
Zhiheng Li, Xinhao Liu, Juexiao Zhang +2
Jul 20, 2026cs.RO

SLAM in Low-Light Environments: Project Report

Simultaneous localization and mapping (SLAM) is one of the fundamental problems in robotics, as it enables autonomous operations in real-world scenarios. Under low illumination, reduced contrast, sensor noise, and motion blur degrade both feature extraction and feature matching, while compensating with LiDAR, depth, or thermal sensors raises cost, power draw, and integration complexity. Existing benchmarks remain dominated by well-lit indoor or daylight sequences, leaving open how far SLAM with standard RGB cameras can be pushed in the dark. We benchmark six systems spanning the feature-based, direct, filter-based, and learning-based paradigms - ORB-SLAM3, DSO, Kimera-VIO, OpenVINS, DPVO, and DPV-SLAM - on five LaMARia sequences of varying difficulty and illumination, reporting absolute and relative pose error alongside control-point recall. Kimera-VIO is the only system to track all five sequences to completion, combining the lowest relative pose error with steadily growing absolute error due to the absence of loop closure; DPVO and DPV-SLAM never lose tracking but incur absolute errors of roughly 100 m under low light; and the classical monocular pipelines (ORB-SLAM3, DSO) together with the filter-based OpenVINS fail outright or diverge on most of the harder and low-light sequences. The results suggest that RGB-only SLAM maintains stable low-light tracking only when both inertial fusion and global optimization are present. Closing the remaining gap will likely require low-light-specific learned front-ends or a return to complementary sensing.
Oleh Basystyi, Anna Stasyshyn, Oleksandr Kosovan +1
Aug 31, 2026cs.CV

Failure or Drift? Evaluating Monocular SLAM under Synthetic and Real-World Corruptions

Visual SLAM is commonly evaluated on clean trajectories, although deployment failures are often caused by adverse weather, illumination, blur, and sensor artifacts. Controlled corruptions are attractive because they isolate such factors, but a synthetic stress test is useful only when it leads to the same engineering conclusion as the condition it is intended to approximate. This work examines that question for monocular SLAM. We evaluate a classical feature-based system and two learned trackers under image-space, geometry-aware, and compound corruptions, and compare their behavior with adverse conditions from 4Seasons. Rather than reducing robustness to a single trajectory error, the evaluation separates explicit tracking failure from drift accumulated by methods that remain active. The results show that learned trackers largely replace catastrophic loss with sustained, and sometimes severe, drift. More importantly, the apparent ordering of the learned systems changes with the physical fidelity of the corruption: structured rain and fog proxies preserve the real-world ordering, whereas a simple illumination proxy does not. Code is available at: https://github.com/abhaythomas/master_thesis_vslamlab_robustness.
Abhay Skaria Thomas, Shashank Agnihotri, Margret Keuper