Autonomous contact-based micromanipulation is challenging because surface and interfacial interactions at the microscale are difficult to model accurately, limiting the use of conventional model-based control and sim-to-real learning. We present a closed-loop sim-to-real reinforcement learning (RL) approach for microfiber shape control on a surface. The central idea is to train geometric shape regulation in a simplified frictionless simulator and rely on real-time visual feedback during deployment to iteratively correct the observed effects of unmodeled surface interactions. An RL policy trained entirely in simulation is transferred directly to a physical dual-gripper micromanipulation system operating at 40 Hz, without retraining or domain adaptation. Using silk microfibers as a testbed, the policy achieves a mean point-wise shape error of 270 ± 80 μm across twenty-four diverse initial configurations. Across nine specimens covering all combinations of three fiber diameters (50, 80, and 120 μm) and three manipulated lengths (10 mm, 15mm, and 20 mm), the same policy achieves sub-millimeter final shape error without any retraining or retuning. These results show that a policy learned in a simplified simulator can achieve repeatable real-world microfiber shape regulation under surface contact, provided that the task-relevant effects of the sim-to-real mismatch remain observable and correctable within the closed feedback loop.
Developing learning-based autonomy for microrobotic manipulation is difficult because physical trials are slow, variable, and poorly suited to large-scale training. We present MicroPush, a lightweight simulation and benchmarking environment for pushing and assembly with magnetic rolling microrobots. The simulator combines overdamped planar dynamics with calibrated rolling actuation, reduced-order contact handling, short-range interaction corrections, and optional background flow, while providing common interfaces for planning, model-based control, reinforcement learning (RL), interactive visualization, and headless evaluation. In no-render tests, MicroPush remains substantially faster than real time, reaching 37.0x real time with 100 passive particles. We further evaluate the simulator through zero-shot sim-to-real policy transfer. A Residual RL-MPC policy is trained entirely in MicroPush, frozen after simulation training, and deployed on the physical system without real-world policy fine-tuning. A 20 μm magnetic microrobot pushes a similarly sized silica particle along a figure-eight trajectory with 1.91 μm median and 4.65 μm 95th-percentile path error, and the same autonomy stack performs sequential line, triangle, and six-particle hexagonal assembly. These results show that a deliberately reduced-order simulator can provide an efficient training and development substrate for sim-to-real microrobotic autonomy.
Human-like dexterous hands with multiple fingers offer human-level manipulation capabilities but remain difficult to train the control policies that can deploy on real hardware due to contact-rich physics and imperfect actuation. We present a sim-to-real reinforcement learning method that leverages dense tactile feedback combined with joint torque sensing to explicitly regulate physical interactions. To enable effective sim-to-real transfer, we introduce (i) a computationally fast tactile simulation that computes distances between dense virtual tactile units and the object via parallel forward kinematics, providing high-rate, high-resolution touch signals needed by RL; (ii) a current-to-torque calibration that eliminates the need for torque sensors on dexterous hands by mapping motor current to joint torque; and (iii) actuator dynamics modeling with randomization to account for non-ideal torque-speed effects and bridge the actuation gaps. Using an asymmetric actor-critic PPO pipeline, we train policies entirely in simulation and deploy them directly to a five-finger hand. The resulting policies demonstrate two essential human-hand skills: (1) command-based controllable grasp force tracking and (2) reorientation of objects in the hand, both of which are robustly executed without fine-tuning on the robot. By combining tactile and torque in the observation space with scalable sensing and actuation modeling, our system provides a practical solution to achieve reliable dexterous manipulation. To our knowledge, this is the first demonstration of controllable grasping on a multi-finger dexterous hand trained entirely in simulation and transferred zero-shot on real hardware.
A key challenge in contact-rich dexterous manipulation is the need to jointly reason over global geometry and nonsmooth contact dynamics. End-to-end policies bypass this complexity, but often require large amounts of data and transfer poorly from simulation to reality. We address the limitations with a simple insight: dexterous manipulation is inherently hierarchical--at a high level, a robot decides where to touch (geometry); at a low level it determines how to move the object through contact dynamics. Building on this insight, we propose a hierarchical RL--MPC framework in which a high-level reinforcement learning (RL) policy predicts a contact intention, a novel object-centric interface that specifies (i) an object-surface contact location and (ii) a post-contact object subgoal pose. Conditioned on the contact intention, a low-level contact-implicit model predictive control (MPC) optimizes local contact modes and real-time (re)plans through contact dynamics to generate robot actions that robustly move the object toward each subgoal. We evaluate the framework on non-prehensile tasks, including geometry-generalized pushing across diverse object shapes, pivoting/flipping-based object reorientation, and environment-assisted object repositioning. It achieves high success rate with substantially reduced data (10 times less than end-to-end baselines), highly robust performance, and zero-shot sim-to-real transfer.